HomeMy WebLinkAboutRevision 1Revision: 1 Per Stan Schroeder 02-18-08
Sold To:
City of Miami
Attn:
Ship To: Bill To:
CUSTOMER PO NO
ALTEC ORDER DATE
ALTEC ORDER NO
TERMS
Net 10 Days
CUSTOMER: ALTEC ORDER NO:
Item
Qty.
Description
Price
PRESSURE DIGGER
1.
1
Altec Model HD35A Hydraulic Pressure Digger built in accordance
to Altec's standard specifications and to include the following
standard features:
A. Stationary structural frame which mounts to chassis. Includes
recessed "Drop Pocket" storage box on curb side, 36 inches wide
x 24 inches deep x 30 inches high (914 x 610 x 762 mm).
B. 240 degree revolving frame
C. Auxiliary engine with 50 gallon (189 L) fuel tank and automatic
shutdown controls for low oil pressure and high water
temperature. Engine hood -mounted gauges include oil pressure,
water temperature, and voltmeter. Access ladder from ground
and work platform included.
•
D. Hydraulic system with a 6,000 psi (408.2 bar) hydrostatic pump
and motor closed -loop system which drives the digging function
E. Hydraulic system with a 2,300 psi (156.5 bar) vane pump and
controls for all other functions
F. Diagnostic pressure test quick disconnect couplings
G. Hydraulic reservoir, 90 gallons (340 L)
H. Operator's control station with arm rest controls. Console -
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
UTILITY EQUIPMENT AND BODIES SINCE 1929
CUSTOMER: ALTEC ORDER NO:
Item
Qty.
Description
Price
mounted pressure gauges for Charge Pressure, Auger Rotation,
Feed Ram, and General System. Folding access ladder.
I. Pressure digger mast including 3.5 inch (89 mm) kelly bar and
feed ram piston which provides down force up to 35,600 pounds
(78,480 kg).
J. Altec Inertia Drive System which includes a patented spur gear
reduction with an energy storage capability that has the tendency
to keep on digging when the auger hits a rock or other
obstruction
K. Main digger frame slides fore and aft 36 inches (914 mm)
L. Mast leveling control provides independent leveling of the mast
20 degrees to right, to left, and to the rear.
M. Outrigger motion alarm for outriggers.
N. Assembly of digger
O. Two (2) Operators and two (2) Maintenance/Parts manuals
P. Many fabricated items are powder coat painted. The remaining
parts are painted with primer coat and finish coat paint, white.
Q. ANSI Z535 safety and instructional signs
R. Down haul swivel hook
S. Snatch block.
T. Wheel chock holders
2.
1
#204 Altec HD35A — 30 feet — Pressure Digger with 30 foot Digging
Depth NOTE: 30 foot is kelly bar length, digging depth is based
off of 40" loaded chassis frame height with ALTEC standard
pressure digger auger and may vary from chassis to chassis.
3.
1
#340 Engine — John Deere CK6068TP3 turbocharged 6 cylinder
diesel, 155 HP
4.
1
#322 Structural Frame — for installation on tandem axle chassis, 138
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
UTILITY EQUIPMENT AND BODIES SINCE 1929
CUSTOMER: ALTEC ORDER NO:
Item
Qty.
Description
Price
inch CT
5.
1
#241 Tool Handler — 3,700 pound winch and 100 feet of 3/8" inch
wire rope and no pole guides.
6.
1
#310 Outrigger - primary A -frame, flat -shoe, 110 inch (2794 mm)
spread, single or tandem axle chassis
7.
1
#311 Outrigger — auxiliary A -frame, flat -shoe, 149 inch (3785 mm)
spread, for all chassis (not required for single axle chassis)
8.
1
#347 Tool Circuit — two (2) sets of quick disconnect couplings.
Hose reel and 50 feet (15.2 m) of 3/8 inch (9.5 mm) hose with one set
of quick disconnect couplings and control valve on curb side. 1 set of
fixed quick disconnect couplings on street side. Parker flat -face
couplings with female couplings (FF-371-6FP) on the pressure lines
and male couplings (FF-372-6FP) on the return lines.
9.
1
#251 Water Tank — 100 gallon (378.5 L), includes hose to kelly bar,
with shut-off valve
10.
3
#359 Auger Stand — 3.5 inch (89 mm) auger post, 10 inches (254
mm) high
11.
1
#358 Material Storage Box — 18 x 18 x 48 inches wide (457 x 457 x
1219 mm), for street side mounting on chassis rail. Door with key -
type lock with two keys.
12.
1
#360 Rear Window Guard — structure mounted on stationary frame
to protect back of cab, 84 inches wide by 60 inches high (2134 x
1524 mm)
13.
1
#398 Umbrella — plastic, 68 inches (1730 mm) diameter.
14.
1
Custom Option #399 Wheel Chocks— Large Style Chocks, Same as
Altec Hi -Line. Set of two.
15.
1
Custom Option: — Extend both front and rear outrigger legs for 6x6
chassis cab configuration.
16.
1
Custom Option: — Extra long ladder for access to engine/fuel area,
for 6x6 chassis cab configuration.
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
UTILITY EQUIPMENT AND BODIES SINCE 1929
CUSTOMER: ALTEC ORDER NO:
Item
Qty.
Description
Price
17.
1
Custom Option: — Extra long ladder for access to operators control
station, for 6x6 chassis cab configuration.
18.
1
Custom Option: — 9ft. nylon sling with eye each end. Sling is to be
attached to downhaul weight and to shackle at base of boom.
19.
1
Custom Option: — Pin on rear operator's access to be larger and to
have T-Handle for easier operator removal and installation.
20.
1
Custom Option: — Remove light holder on rear of the slide frame.
PRESSURE DIGGER AND HYDRA ULICACCESSORIES
21.
1
Primary outriggers are to be installed at rear behind rear axle.
Auxiliary outriggers are to be installed between back of cab and
front of body.
22.
1
6ft hose assembly running from the water tank shut off valve
down to area where operator can direct into hole being drilled.
23.
1
Provisions to pin up the rear mud flaps.
24.
1
Install swivel hook on the winch line cable.
25.
1
PDR-30 S-350 Hub C-31HD teeth 9" dia P/N 137-520
26.
1
PDR-30 S-350 Hub C-31HD teeth 24" dia P/N 137-519
27.
1
PDR-30 S-350 Hub C-31HD teeth 30" dia P/N 137-525
28.
1
Hydraulic oil and lubricants installed.
29.
1
Build-up of rear chassis cab springs.
30.
1
Install glad hands at rear of chassis, one (1) per each side.
Pressure Digger and Hydraulic Total
ELECTRICAL ACCESSORIES
31.
1
Lights and reflectors in accordance with FMVSS #108 lighting
package installed.
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
UTILITY EQUIPMENT AND BODIES SINCE 1929
CUSTOMER: ALTEC ORDER NO:
Item
Qty.
Description
Price
32.
1
Electric brake controller.
33.
1
Berg or equivalent six- (6) pole electrical trailer connection.
34.
2
Amber strobe lights installed one each side of rear cab protector
with master switch and indicator light in cab. Strobe lights are to
be visible from the front and rear of the vehicle. Note: Strobe
lights will be wired hot to chassis cab battery system.
MISCELLANEOUS
35.
1
6" stainless steel grounding lug, welded to curbside front outrigger
leg.
36.
1
Battery Storage Box for chassis batteries, installed just behind
curbside front outrigger leg.
37.
4
Outrigger Pads — Fiberglass 24" L x 22" W x 1"H.
38.
2
Outrigger Pad Holders, one (1) each installed per side.
39.
2
Pendulum retainers on outrigger pad holders.
40.
1
Holland Model T125 or equivalent pintle hook, heavy duty with
frame reinforcement, installed at 28" +/- 1" from ground to
centerline of throat.
41.
1
Two -safety chain rings.
42.
1
One set of splash aprons installed behind rear wheels.
43.
1
Triangular reflector kit installed in cab behind seat on passenger's
side.
44.
1
Five -pound fire extinguisher with mounting bracket, shipped
loose.
45.
1
Anti-skid paint applied to all walkway surfaces.
46.
1
This device is designed and manufactured in a facility that is certified
to meet ISO 9001
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
UTILITY EQUIPMENT AND BODIES SINCE 1929
CUSTOMER: ALTEC ORDER NO:
Item
Qty.
Description
Price
47.
1
One (1) year parts warranty
48.
1
Ninety (90) days labor warranty at customer's location
49.
1
One (1) year labor warranty at an Altec service facility
50.
1
For so long as the initial purchaser owns the product, major
components warranty at an Altec service facility (See Altec Limited
Warranty)
FINAL ASSEMBLY
51.
1
Installation of pressure digger and digger accessories.
52.
1
Miscellaneous hardware and materials required for installation of
pressure digger and digger accessories.
53.
1
Install safety -warning decals for general-purpose users.
54.
1
Paint pressure digger and accessories one solid color white to
match cab.
55.
1
Delivery to Miami, FL.
Accessories Total
SUB TOTAL
$192,621.00
56.
1
CHASSIS AND ACCESSORIES
2009 International Model 7400 6x6 Straight Frame
221" Wheelbase, 146" CT
Tow loop, front, frame mounted
Frame rails, C- Channel reinforcement @ 120,000 PSI
Front bumper, aerodynamic
Double front frame extensions
Axle, front driving type (Meritor MX-14-120) , single reduction,
14,000 lb. Capacity
Suspension, front, 14,000 lb. Capacity with shock absorbers
Brake system, air, dual
Trailer connections, with hand control
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
UTILITY EQUIPMENT AND BODIES SINCE 1929
CUSTOMER: ALTEC ORDER NO:
Item
Qty.
Description
Price
.
Air brake ABS
Air dryer (Bendix AD-9) with heater
Air compressor (Bendix Tu-Flo 550) 13.2 CFM
Exhaust, single, horizontal, Aftertreatment Device Frame
Mounted, Outside Right Rail, Under Cab; Includes Vertical
Tail Pipe & Guard
Tilt & Telescopic Steering Wheel
Alternator, 135 amp
Battery system, two (2) 12-volt, 1,850 CCA
Radio (International) AM/FM with CD player
Trailer connection socket 7-way
Horn, air mounted behind bumper right side
Fender extensions
Front end, tilting, fiberglass
Block heater, engine (Phillips) 120 Volt/1250 watt
Engine, diesel, International Maxxforce 9, 300 HP/800 lb-ft
Torque
Combination Engine & Exhaust Brake, Electronic Activated
Fan drive, (Horton Drivernaster)
Engine control, remote mounted
Throttle, hand control
Transmission, automatic, Allison Model RDS3500, 5-speed
Transfer case (Meritor T-4213 2) 2-speed
Axle, rear, tandem, single speed, 40,000 lb. Capacity
Driver controlled diff-lock both rear axles
Suspension, rear, tandem, Hendrickson RT-403 40,000 lb. Capacity
Fuel/water separator
Fuel tank, LH side 70 gallon
Interior color, pearl gray
Gauge cluster, with english speedometer and tachometer
Seat, driver, National air suspension
Seat, two -man passenger bench
Mirrors, Rectangular 7.44" x 14.84"
Mirrors, 7.44" Convex
Heater with defroster
Air conditioning
Wheels, front, disc, 22.5 x 9.00
Wheels, rear, disc, 22.5 x 8.25
Tires, front, 12R22.5H, Goodyear, 16 ply
Tires, rear, 11R22.5G, Goodyear, 14 ply
Painted White
CHASSIS TOTAL
87,954
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
UTILITY EQUIPMENT AND BODIES SINCE 1929
CUSTOMER: ALTEC ORDER NO:
Item
Qty.
Description
Price
TOTAL
$280,575.00
NOTES
1. F.O.B. — Miami, FL
2. This quote does not reflect any local, state, or federal taxes.
All appropriate taxes will be added to the final price, in
accordance with regulations in effect at the time of sale.
Specifically, should the proposed federal excise tax
regulations become effective before the delivery of the unit,
such taxes will be added to the price.
3. Terms: If chassis is ordered through ALTEC Industries, Inc.
the chassis payment is due upon receipt of the chassis at
ALTEC Industries, Inc. Balance is due net ten (10) days
after receipt of completed unit.
4. Interest charge of 'A% per month to be added for late
payment.
5. Delivery: 180 - 210 days after receipt of order
PROVIDING:
A. Chassis is received a minimum of sixty (60) days before
scheduled delivery.
B. Approval drawings are returned by requested date.
C. Vendor or customer supplied accessories are received by
date necessary for compliance with scheduled delivery.
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
UTILITY EQUIPMENT AND BODIES SINCE 1929