HomeMy WebLinkAboutAmerican Coating Corporation 206/05/2006 11:36 9549703690
AMERICAN COATINGS CO
PAGE 03
AMERICAN COATINGS CORPORATION
Serving the Environmental Control Industry Since T 1979
e (eoo) 633 0151
3037L NW 60th Street Fax (954) 970.3690
Ft, Lauderdale, FL 33309
ACC-5.55
Low Odor Mastic Remover
Organic Industrial Cleaner & Degreaser
ACC-555 has been developed as the "next
generation" of organic, low odor mastic removers. It
is an effective and economical stripper of
lt
cutback adhesives.
ACC-565 contains a unique high purity solvent base
with very low levels of aromatics. The end result is
a clear cleaning composition with a mild odor low odor
higher solvent strength then competitive
products.
ACC-555's formulation contains more solvent
content, yielding faster and more thorough removal
than other low odor products_
Flash Point Higher than 142 F
K-B Value 30-35
High Purity Solvent Base
Virtually Nitrogen & Sulfur Free
More Solvent Per Gallon Than Other
Low Odor Products
CLASS
COLOR
SHIPPING CLASS
WEIGHT PER GALLON
FLASH POINT
BOILING RANGE
NITROGEN, ppm
SULFUR, ppm
Cleaning Compound
Clear
. 55
6.80
>142° F
350°F-4759F
<5
<5
APPLICATION SUGGESTIONS
Consult Material Safety Data before handling ACC-655.
Keep MSDS available during usage. Sample applications
sire recommended to determine
the
product'a
with a desirability
and most effective coveragerate,
ent
mechanical ventilation,
METHOD A
1, Using easy -to -pour spout, soak the materiel to be
removed. Allow enough time for ACC-555 to
penetrate and loosen the material.
2. With cleaning tools, such as scrubbers, broom*.
brushes or scrapers, remove the treated
material.
3. When necessary, repeat the above steps.
4. Wash and rinse thoroughly with detergent and
water. Repeat when necessary. Allow to dry. Surface
muet be clean prior to reinstallation,
5, Collect and dispose of all materials in
accordance with ail Federal, State and Local
regulations.
METHOD B
1. Apply sufficient amount of ACC-555 to the material to
be removed.
2, Begin cleaning operations qulakiy. Using scrubbers,
brooms, scrapers or brushes, work ACC-555 into the
treated material, Continue as required,
3, Repeat steps 3 through 5 of Method A,
American Coatings Corporation's (AOC) liability regarding this
product is limited to the replacement of any materiels which are
found to be defective by ACC's laboratory. The user shall be solely
responsible for determining the suitability of this product her each
project onto warranty, expresCs orh it �Implimakess intended to be used, ACC no
Implied, with regard to this product.
I kMERICAN COATINGS CORPORATION 2003