HomeMy WebLinkAboutexhibitLOV.
180 Industrial Drive
Burlington. WI 53105
800,5513.5986
Fox 262.763.0156
www.ldvuso.com
PRELIMINARY
SPECIFICATIONS FOR:
MIAMI POLICE DEPARTMENT (FL)
MOBILE COMMAND CENTER
LDV MODEL 11MCC30LLC260-03
, 0 0
rn 20
r-,
4%, a
April 20, 2005
?06 4#050o6P30
I.DV, Inc.
180 Industrial Chive
Burlington, WI 5:1105
800.558.3986
• Fax 262.763.0156
www.?dvuso.com
2003 GSA "11-22" PRICING PAGE:
Totalcommercial price as specified FOB continental U.S.
GSA 2-unit price as specified (if applicable)
GSA delivery terms are 180 days or less ARO.
Note: A GSA purchase order and an approval letter from the GSA State Point Of Contact
(SPOC) is required to be eligible for GSA 1122 pricing.
GSA payment terms: 2% Net 10, 1.5% Net 15, Net 30.
Quote is firm for 30 days from specification date.
$ 484,458.00
$ 449,335.00
LDV
LDV, Inc.
I80 Industrial Drive
Burlington, WI 51IIO{
800.558.3986
Fox 262.763.0 r56
www.Idvusa.eOn''
Section Oty
1.00 CHASSIS/BODY DIMENSIONS:
1.01 1. Wheelbase of chassis: 276"
2. Overall length of apparatus, including rear step: 473"
3. Overall apparatus width, rub rail to rub rail: 96"
4. Rear step height from ground (loaded): 24-
5. Overall height of apparatus (loaded): 144"'
6. Interior walkway height raw body: 83"
7. Interior walkway height finished: 81.5"
8. Interior walkway length: 360"
9. Interior raw body width: 93"
10. Interior finished body width: 85.5"
'Note: Estimated measurement dependent on chassis components, axles, tires, frame, suspension,
and roof -mounted equipment. ---
2.00
2.01
CHASSIS: ----
GENERAL:
1. Freightliner MT-55 forward control chassis. Minimum 30,000-Ib. GVWR with rear air ride
suspension and air brakes.
ENGINE:
1. Cummins ISB 260-hp turbo -charged diesel engine (260-hp @ 2500 rpm, 550-Ib.ft. of torque @
1900-rpm).
2. Largest available down flow radiator with transmission cooling and radiator mounted surge tank.
3. Eaton viscous fan drive.
4. Anti freeze to -34°F (Ethylene Glycol premixed to 50/50).
5. Frontal air intake with FAFIR ECO-SE air cleaner mounted on rail.
6. Electronic integral engine warning and derate protect system.
7. Single horizontal inboard exhaust with horizontal tail pipe exiting on the street side.
8. Cummins supplied remote mounted fuel/water separator with heater.
9. Full flow oil filter,
10. Phillips 1,000-watt block heater.
11. Cummins supplied 15.2-cim air compressor.
INSTRUMENTATION AND CONTROLS:
1, Electronic fuel quantity gauge.
2. Temperature and oil pressure gauge.
3. Charge indicator (voltmeter).
4. Speedometer with odometer.
5. Electronic cruise control with switches in left hand dash panel.
6. Transmission temperature gauge.
7. 3,000-rpm tachometer.
8. Warning lamp light bar display in dash.
9, Hour meter.
TRANSMISSION:
1. Allison 2500EVS (or current model) heavy-duty 5-speed automatic transmission.
2. Transmission water -to -oil cooler.
3. Castro! Transynd synthetic transmission oil.
Copy of Miami (FL} Police Dept MCC30L1S260-03 IKP.2i
4/20/2005
LOV
Section Oty
LOY, Inc
180 Indus Iriol Drive
Burlington, WI 51105
800.558..198a
Fox 262.763.0156
www.ldvusa.c om
AXLES & SUSPENSION:
1. Meritor 10,000-lb. front axle.
2. 10,000-Ib. taper -leaf front springs with maintenance free rubber bushings.
3. Meritor minimum 19,000-Ib. rear axle.
4. 5.57:1 gear ratio. With this gear ratio the maximum -geared speed is 74.5 mph.
5. Freightliner 20,000-Ib. Airliner rear air ride suspension with a high ride height and manual iliir
ride dump valve. Air ride system includes dual instant response rear suspension leveling valves.
6. Dana Spicer half round yoke driveline with drive shaft guard.
7. Heavy duty Gabriel front and rear shock absorbers.
8. Eaton 2834 (Emery) synthetic SAE 75W-90W oil in front and rear axles.
9. Front and rear oil seals.
BRAKES:
1. 4-wheel air brake package with Wabco 4S/4M ABS w/o traction control.
2. Rear brake dust shields.
3. Reinforced nylon, fabric braids & wire braid chassis air lines.
4. Pure air plus air dryer with electric heater. Air dryer mounted on left hand frame rail inboard.
5. Steel air brake reservoirs.
6. One auto drain valve, two manual drain valves with pull cord.
7. Meritor 15" x 4" O+ cam front brakes, cast iron outboard front brake drums and 5.5" unhanded
Meritor automatic front slack adjusters.
8. Meritor 16.5" x 7" 0+ cast spider cam rear brakes, double anchor, fabricated shoes, standard
brake chamber location, cast iron outboard rear brake drums. Bendix automatic rear slack
adjusters.
9. Anchorlok Goldseal tamper proof 1-drive rear axle spring parking chambers with orange alert.
STEERING:
1. Ross TRW TAS-65 power steering.
2. Tilt/telescopic steering column.
3. 18" charcoal steering wheel.
FUEL:
1. 90 gallon/340 liter rectangular steel fuel tank mounted between frame rails behind rear axle with
driver's side fuel fill.
2. Length of auxiliary pickup tubes (generators, furnaces etc.) shall prevent these devices from
using more than 75% of vehicle's fuel tank capacity.
FRAME:
1. 5/16" x 2.81" x 9.13" 50,000-psi steel frame.
2. Frame RBM is 540,000-Ibf/in/rail or 1,080,000 total.
3. Frame warranty is 5 years/100,000 miles.
4. Frame is constructed using only grade 8 bolts.
ELECTRICAL:
1, Leece Neville 200-amp alternator factory installed.
2. Sure Power 2402 or 2403 isolator to allow alternator to charge the chassis and auxiliary battery
banks.
3. Dual Alliance Group 31 MF min 1310-CCA (or largest available) batteries.
4. Automatic sell -reset circuit breakers.
5. Delco 12Vdc 28MT (or current model) starter.
6. Dual electric horns.
7. 97-dB backup alarm.
Copy of Miami (FL) Police Dept MCC3OLLS260.03 (KP.2) 2 4/2012'D05
LD
Section Oty
2.02
2.03
2.04
2.05
2.0E
2.07
3.00
3.01
1
1
2
3.02
3.03
3.04
3.05
3.06
3.07
3.08
3.09
1
3
1
3
1
1
1
8
[DV, inc.-
180 Induslriol Drive
6urlingfpn, WI 53103
800.558,5986
Fax 262,763.0156
www.ldvuso.com
TIRES AND WHEELS:
1. Two (2) 10R22.5 - 14-ply highway tread radial tires (front). (Load rating for both tires 11,380-
lbs.).
2. Four (4) 10R22.5 -14-ply mud and snow tread radial tires (rear). (Load rating for all four tires
20,320-Ibs.).
3. Four (4) 10-stud hub -piloted 22.5" x 7.5" aluminum wheels and two (2) inside rear steel wheels
22.5" x 7.5".
4. Aluminum wheels include Alcoa chrome trim kits with center cap and lug nut covers.
Note: Chassis specifications are from Freightliner Custom Chassis and are subject to change by
Freightliner,
Cummins five (5)-year/100,000 mile engine warranty with five (5)-year/50,000 mile Allison
transmission, and Rockwell rear axle warranty.
Block healer shall be wired to a switch on the AC control panel.
Spare 10R22.5 Michelin XZE (or equal) 14-ply highway tread radial tire mounted on 10-stud hub -
piloted 22.5" x 7.5" steel wheel. _ -----
DOT triangle reflector kit with three (3) triangles. ---
Pair of rubber wheel chocks with rope handle. -----
Chrome exhaust tip on chassis tail ipe.
BODY:
1. Load space area shall be 83" high x 93" wide x 30' long custom all aluminum step van body.
32" wide x 82" high 0.125" aluminum sedan door with 21.5" wide x 25.5" high fixed window and
blind. Door shall have continuous stainless steel piano hinge, two (2) nylon door straps and an
aluminum drip rail. Located as shown on drawing.
Heavy-duty fluted aluminum grab handle with rubber inserts and chrome plated stanchions installed
at exterior ent_y door location.
Heavy-duty fluted aluminum grab handle with rubber inserts and chrome plated stanchions installed
inside entry door.
Automatic courtesy light at side entry door. ----
Courtesy light defeat switch on dash. Kwikee Series 39 (or current model) 24" wide automatic electric steel entry step painted black. St-e--
p
surface shall be covered with NFPA 1901 approved embossed aluminum tread plate. Located as
shown on drawing.
Trimark keyless entry with remote radio frequency (RF) transmitter fob, externally mounted keypad
and lock actuator.
Trimark keyless entry additional door. ----
Trimark keyless entry additional exterior key -pad. ---
Whelen 810 Series combination stop/tail, turn and reverse lights, model number 8103RACR (or
current model).
Entire underside of the apparatus shall be undercoated. Includes chassis, floor extrusions, step
wells and aluminum compartments. -
Rear mud flaps with anti -sail brackets.
3.10
3.11
3.12
3.13
1
Copy of Miami (FL) Police Dept MCC30LLS260.03 (KP.2) 3
4/20/2005
1,011
Section
4.00
Oty
(.DV, !roc.-7
180 lnduslriof Dth e
Budinglon. WI 53105
800.558.5906
Fox 262.763.0156
www,dvusa,corn
-y
LDV SLIDE -OUT:
1. Body shall have one (1) slide -out room with approximate dimensions of 72" high x 143" long
(max) x 30" deep located forward of the rear axle.
2. The slide -out room shall be constructed of heavy duty tubular aluminum with welded joints for
superior strength.
3. The sides of the room shall be sheeted with aluminum sanded and painted to match the exterior.
4. When in the closed position the slide -out room shall have a gap of less than .5" around the entire
perimeter of the slide -out wall and the exterior side wall.
5. The slide -out shall incorporate a full perimeter air seal and dual wiper retainer to wipe debris frolTl
the room when sliding in and out. The structure around the air seal shall be reinforced to support
the air seal.
6. Slide -out seal shall provide a weather tight seal without the use of an awning.
7. The drive mechanism shall utilize an electric screw drive with bearing follower and machined
track for smooth operation.
8, Room shall be supported utilizing heavy-duty machined precision slides mounted off steel
bearing places that are attached to the frame rails using grade 8 bolts.
9. Use of floor rollers to support slide out is not acceptable, floor rollers cause deformation of body
floor structure.
10. Slide -out shall not have any ceiling mounted components.
11. Controls for the slide -out shall utilize PLC logic and shall operate with the touch of one button.
When the control button is pressed it shall automatically deflate the air seal, pause, vacuum out the
air seal, extend the slide -out to its fully open position, and re -inflate the air seal. An LCD display
shall be provided on the control pad and shall be capable of displaying status information on the
slide -out operation to the user.
12. Slide -out shall be finished in such a fashion that will allow access to serviceable components
under the floor of the body. All serviceable components shall be protected from the elements. --
PAINT AND GRAPHICS:
Body base color shall be Dupont Imron N0006-HH white (or equal) with two-tone nonmetallic paint
scheme, (lower color -- to be determined). ---
5.02 1 4-inch wide reflective stripe on the exterior back and sides of the vehicle, placed up to 48" above
ground level (color to be determined).
5.03 1 Custom computer -generated non -reflective vinyl graphics per customer specifications. Includes up
to seventy 8"-10" letters and up to forty-five 3"-6" letters. All lettering shall be shaded or outlined
(colors/style - to be determined).
Note: Graphics package does not include production of custom shields and/or seals.
6.00 DRIVER/PASSENGER CAB AREA:
5.00
5.01
Copy of Miami (FL) Police Dept MCC3OLL5260.03 (KP.2) 4 4/20/201)5
7
ors` 180 Indusfriol Drive
BurIngran, WI 53105
800.558.306
fax 262.7610156
LDv-�� •� www.ldvuaa.com
Section Oty
6.01
6.02
6.03
6.04
6.05
6.06
6.07
6.08
6.09
6.10
Lov, Inc.
1, Cover upper area of cab doors with 36-oz, vinyl and lower area with padded 36-oz. vinyl (color -
to be determined).
2. 10" high 0.100" bright aluminum tread plate kick plate at bottom of doors.
3. Heavy-duty rubber grab handle on each door.
4. 3/4" plywood panels covered with Excalrbur onyx carpel above driver and passenger doors.
5. Cab sub ceiling shall be 1/2" plywood, APA-NRB-108FHA-UM-66,
6. Cover sub ceiling with Veelok Oxford 17-oz. ribbed loop pile fabric (color - Light Grey).
7. Vehicle height sign on dash.
8. Cab floor shall be covered with 5/8" plywood and covered with flooring as specified in Walls,
Ceiling and Floor section.
9. 131ack ribbed rubber mat in driver and passenger toe plate area. Insulate walls in toe plate area
and cover walls and engine box with black carpeted panels.
10, Vehicle shall have a Final Stage Vehicle Certification and Altered Vehicle Certification as
required by Federal Motor Vehicle Safety Standards (FMVSS) 49 CFR Part 567.5 and 567.7
11. Payload sticker in cab area with vehicle axle load ratings and available axle payload as built.-
Work area on passenger side constructed of 3/4" plywood covered with black laminate and trimmed
^
with vinyl T-molding,
Control panels for 120Vac and 12Vdc systems shall be located in the overhead console. The entire
console shall be constructed of 3/4" plywood. The face shall be finished with black laminate and the
bottom shall be covered with Excalibur onyx carpet.
Blue/while dome light under overhead console.
Pair of 6" front windshield fans.
Safety Vision SV-CLCD-65.620 color back-up camera and monitor system
Pioneer DEH-P77DH (or current model) 45-watt x 4-channel, AM/FM/CD player and 3-band
parametric EO, with one (1) pair Pioneer TS-A6970R (or current model) 6" x 9" three-way 160-watt.
speakers.
Additional pair of Pioneer TS-A6959 (or current model) 6" x 9" three-way 160-watt speakers.
L-pad volume control for additional speakers. -
Blackout curtains for all cab area windows:
1. Custom fit to cab windows.
2. Curtains shall be made of woven fabric made al 100% SEF/FR® self -extinguishing fibers,
modacrylic solution dyed with a fluorocarbon finish (color - to be determined).
3. Weight is approximately 9.25-oz. per square yard.
4. Material shall be guaranteed not to fade, mildew -or rot for 5 years.
5. Seams shall be double stitch/single fold with 1" sewn -in hook -and -loop or nickel plated fasteners.
6. Fabric shall meet FMVSS 571,302 requirements for use in the driver/passenger area.
7.00
7.01
7.02
7.03
7.04
7.05
7.06
7.07
7.08
7,09
1
WALLS, CEILING AND FLOOR:
Insulate walls and ceiling with a minimum of 2-1/2" of fiberglass.
Cover interior body side posts with 1/2" plywood sub wall, 4APA-NRB-108FHA-UM-66.
Cover sub wall with Wilsonart laminate (color to be - determined). -
Radius contoured walls in rear conference area --
Cover interior roof supports with 1/2" plywood, 41APA-NRB-108FHA-UM-66,
Cover sub ceiling with Veelok i7-oz. ribbed loop pile fabric (color Light Grey). -
5/8" exterior grade tongue & groove plywood underlayment for floor, t/APA-NRB-108FHA-UM-66.
Lonseal Loncoin II Fleckstone non-skid commercial grade PVC flooring. The flooring shall be a
continuous piece front to back with a longitudinal seam located under cabinetry and countertops on
one side of truck (color - to be determined).
Hinged step well cover located as shown on drawing.
Copy of Miami (FL) Police Dept MCC30LLS260-03 (KP.2)
5 412012005
Section
7.10
7.11
7.12
7.13
7.14
7.15
8,00
8.01
Oty
1Dv°Inc.
60 industrial Clrwe
Burfinglon, wl 53105
800.358..5980
Fax 202.763.0ISo
www.fdvuso.dorn
2-1/2" vinyl cove molding as required (mop board).
30" FRP covered pocket door with FRP covered plywood bulkheads to separate sections as shown.
Pocket door shall be installed on heavy-duty aluminum track with two (2) four-wheel roller trucks.
Pocket door shall have recessed handles and a key lock.
Alt bulkheads shall be covered with Kemlite 0.050" FRP.
Cover load space door with white powder coated aluminum panel. Door shall have a padded vinyl
panel on lower area, 10" high 0.100" bright aluminum tread plate kick plate at bottom and heavy-duty
rubber grab handle.
30" wide x 12" high deep -tint horizontal sliding window with mini -blind.
36" wide x 24" high deep -tint 'horizontal sliding egress window with mini -blind.
8.02
8.03 1
8.04
8.05 1
8.06
8.07
9.00
9.01
9.02
9.03
9.04
GALLEY AND LAVATORY:
1. Hand pump water system with one (1) five gallon fresh water tank and one (1) five gallon gray
water tank. Tanks shall be mounted in cabinet below sink.
2. Stainless steel galley sink with chrome plated sink hardware.
Incinolet model WB 240 stainless steel electric toilet system with the following:
1, 200 paper fillers.
2. One (1) 20A/240Vac receptacle for power connection.
3. Ducting to the exterior of the vehicle.
4. Trash can and chrome plated toilet paper holder.
5. Return air vent.
6. Sign reading: NOTICE: Ceiling vent fan must be turned off when Incinolet is in operation. _____
Sani-Dex Antimicrobial disposal 135 count hand wipe canister (ref. 2BB-23549P) with wall bracket
(rel. 2BB-75442), Wipes comply with OSHA guidelines.
Minimum 0.9-cu.ft. 900-watt microwave oven.
Black & Decker model ODC325 (or current model) under -cabinet coffee maker.
Norcold model DE-0051 (or current model) 12Vdc/120Vac refrigerator with the following features:
2.7 cu. ft. capacity.
Freezer shelf for ice cube tray.
Two door bins; lower bin holds 2-liter containers.
Integrated door latch.
Oasis ##B1 SRK water cooler with cold and room temperature water outlets. Install hinged shelf
above water bottle location to secure bottle to water cooler during transit.
SEATING:
Herman Miller Aeron (or current model) ergonomic work chair.
Custom fabricated sliding pedestal for desk chair. Located as shown on drawing.
Fabricate and install fixed bench seating with removable cushions as shown on drawing.
1. Bench seat cushions shall be covered in heavy-duty cloth and vinyl materials (color « to be
determined).
1. Foam for seat backs and bottoms shall have a minimum density rating of 28, a minimum
compression rating of 65 and a support factor of 2.2.
2. All bench sealing material must meet Federal Motor Vehicle Safety Standards part 571.302
Flammability of Interior Materials.
3. Seam stitching shall be done with 8-oz. bonded nylon thread.
4. Material corners shall be squared or angled to tit precise cut of foam.
5, Foam shall be bonded to plywood backer with industrial grade elastomer adhesive.
6. Bottom and sides of plywood backer shall be completely sanded.
7. Stapling of fabric/vinyl to backer with industrial grade upholstery staples,
8. No more than a 1/2" space is acceptable between staples around the entire perimeter.
9. All fabric shall be stain resistant.
Copy of Miami (FL) Police Depl MCC3OLLS260.03 (KP.2) 6 4/20/2005
LDV
LDV, Inc,
180 Industrial Drive
Burlington, WI 53105
800.558.5986
Fax 262.763.0156
www.tdvuso.com
Section Qty
10.00
10.01
10.02
10.03
10.04
10.05
10.06
10.07
11.00
11.01
11.02
11.03
11.04
12,00
12.01
12.02
4
6
2
3
2
1
1
1
NMI
CABINETS:
1. Custom fabricated aluminum cabinets with radius edging incorporated as design permits.
Located as shown an drawing.
2. Base cabinets are constructed of 0,080" powder coated aluminum with anodized aluminum
frames.
3. Base cabinet doors are double shell, formed from a single sheet of 0.080" aluminum, with a
0.040" aluminum door back attached.
4. Overhead cabinets are constructed of 0.064"powder coated aluminum with anodized aluminum
frames.
5. Overhead cabinets doors are double shell, formed from a single sheet of 0.064" aluminum, with a
0.040" aluminum door back attached.
6. Overhead cabinets doors swing up on a full-length aluminum hinge, and are held open with a
locking door stay.
7. Overhead cabinets to have one adjustable shelf per door (24" high and taller cabinets only) -
locked in place to your selected height. Shelves are formed from a single sheet of 0.064" mill finish
aluminum, with 1 1/8" hemmed edges.
8. Radius Edging is constructed of extruded aluminum of the same gauge as the associated
Dry erase writing surface on overhead cabinet doors. J
Wilsonart Gibraltar 1/2" solid surface countertop over subsurface. Solid surface countertop shall
have a 1-1/2" front lip with chamfered edge (color ,to be determined).
Powder coated aluminum conference table base
Solid Surface communication equipment shelf mounted above countertop.
Quartet Magnetic Porcelain Marker Board ORT P564T (or current model) 48" x 36".
• Whiter white, magnetic; matte finish for reduced glare.
• Full-size tray for markers and erasers.
Pencil drawer under countertop, located as shown on drawing.
HVAC SYSTEM: Fan-tastic Vent model 4000 R (or current model) 3-speed reversible 12" power roof ventilator.
Coleman Polar Mach 9200 series low profile air conditioner, with 5,600 Btu/hr heal strip and
condensate pump.
Ducted roof air conditioner. Includes Coleman Chillgrille, six (6) 5" diameter supply vents, and
Coleman digital wall mount thermostat.
Broan model 174 wall mount 5,120 Btu/hr electric heaters. Located as shown on drawing.
120/240VAC ELECTRICAL SYSTEM:
Kohler 20-kW 120/240Vac liquid -cooled diesel generator mounted in a custom fabricated
compartment. The compartment shall have a layer of sound barrier material. Consists of metalized
myiar facing, 1" sound absorbing foam, 1.0#/sf barrier, 1/4" foam decoupler and a 3 mil. acrylic
pressure sensitive adhesive with a 76# kraft paper liner.
Compartment shall be constructed to the following specifications:
1. Compartment shall be constructed from 0.187" aluminum with all welded seams.
2. Compartment shall have 0.125" aluminum 2" box pan doors and 0,125" aluminum frames.
3. Door frames shall be riveted to the body and welded to the compartments.
4. Doors shall have stainless steel hinges attached to the doors and door frames with stainless
machine screws.
5. Doors shall have slam latches and stainless rotary D-Ring handles.
6. Doors shall have 0.100" polished aluminum diamond plate on interior surfaces.
7. Doors shall be held open in a 90°position with gas charged lift/support cylinders.
8. Doors shall be sealed with industrial grade neoprene gasket.
9. Compartment shall have internal lighting when door is open. _
Air bag mount for Kohler generator.
Copy of Miami (FL) Police Dept MCC3OLL5260-03 (KP,2)
7 4/20/2005
Section Oty
12.03
12.04
12.05
12.06
12.07
12.08
12.09 1
12.10 1
12.11 9
12.12
12.13
12.14
12.151
12.16
13.00
13.01
Blachford Quiet Insulation generator compartment.
Generator exhaust routed to roof.
LDV, Inc.
180 Industrial Owe
8urlingran, WI 53105
800.558.5966
Fox 262163.0166
www.ldvuso.com
Install surge suppression for entire 120Vac system. _ _---
Supplemental direct ground protection of the apparatus 120-volt electrical system (for use when a
satisfactory ground is available), includes:
1. 6' screw type copper clad rod with bronze fittings.
2. Approximately 25' of #6 gauge stranded copper cable with a fitting to attach to the screw rod.
80A-120/240Vac control panel with generator and shore power main breaker, twelve (12) UL listed
magnetic/hydraulic branch circuit breakers with amber LED indicators, digital voltmeter, digital
frequency meter, digital ammeter, generator stop/start switch, generator hour meter, shore power
reverse polarity indicator and rotary transfer switch. -�
120Vac auxiliary control panels as required with UL listed magnetic/hydraulic circuit breakers and
amber LED indicators.
Kussmaul Auto Eject 20, 20A-120Vac shore power inlet with 25-ft. 20A-120Vac shore power cord. ^T
Marinco 50A-1251250Vac waterproof shore power inlet, 50-ft. 50A-125/250Vac shore power cord
and 6-ft. 50A•125f250Vac pigtail. _ ---
Specification grade 20A-125Vac duplex receptacle with stainless steel wall plate located as shown
on drawing. These receptacles are not dedicated to any installed equipment.
Specification grade 20A-125Vac GFCI duplex receptacle with stainless steel wall plate as shown on
drawing. These receptacles are not dedicated to any installed equipment.
Specification grade 20A-125Vac exterior GFI duplex receptacle with weatherproof PVC cover.
These receptacles will be wired in pairs to 20A circuit breakers located in the 120Vac electrical load
distribution center.
Specification grade 20A-125Vac duplex receptacle mounted in pedestal box located as shown on
drawing. These receptacles are not dedicated to any installed equipment.
Will -Burt Night Scan Powerlight NS15-3600M (or current model) 240Vac light tower with dual till.
Includes:
• Four (4) 900 watt Magnafire 3000 Halogen I.R. lightheads.
• Dual tilt remote control positioner .
• Look -up light for added safety.
• Dash mounted warning light with interlock to prevent vehicle from being moved with light tower
raised.
• Additional roof support structure, as required. --
1. All 120/240Vac main wiring shall be stranded THHN wire and run in non-metallic Carlon Carflex
liquid tight conduit.
2. All 120/240Vac branch circuit wiring shall be stranded THHN wire (AWG 12 minimum) and run in
non-metallic Carlon Carflex liquid tight and Carlon Flex -Plus blue ENT conduit.
3. All electrical circuits and appliances shall conlorm to applicable national electrical codes.
12VDC ELECTRICAL SYSTEM:
1. Six {6) Trojan T125 deep -cycle 6Vdc batteries. Batteries shall be installed underbody in slide out
weather resistant aluminum compartment. Compartment shall have 2" box pan door with slam latch,
stainless rotary D-ring handle, CH545 key lock and Kwikee heavy-duty slide assembly. Four (4)
batteries will be separated for auxiliary equipment (4.4 hours of capacity @ 75-amp discharge rate)
and two (2) batteries will be tor communications equipment (2.2 hours of capacity @ 75-amp
discharge rate). Battery data assumes a usable voltage range 01 13.6 to 10.5 volts.
Copy al Miami (FL) Police Dept MCC30LL5260.03 (KP.2) 8
4/20/2t105
inv
Section
Oty
WY. Inc, —
IBO IndustnaI Drive
9udington, WI 53105
800,558.5986
For 262.703 0156
www,tdvusc.Com
2. Three (3) electronic converter/chargers, 80 amp minimum output each, installed underbody in
weather resistant aluminum compartment. Compartment shall have 2" box pan door with slam
latch, stainless rotary D-ring handle, CH545 key lock and gas charged lift/support cylinders.
Converter/charger features:
• Charges three banks of batteries at the same time.
• UL listed for safety.
• Manual reset circuit breaker,
• Reverse battery protection.
• Electronic current limiting.
• High voltage protection.
3. One (1) Cole Hersee master disconnect switch to control the auxiliary battery systems.
4. 12Vdc control panel with seven (7) UL listed magnetic/hydraulic circuit breakers with red LED
indicators, 12Vdc digital voltmeter, and 12Vdc low voltage alarm.
5. 12Vdc auxiliary panels with UL listed magnetic/hydraulic circuit breakers as required.
6. 12Vdc auxiliary digital voltmeter to monitor the communications battery system.
1 Lifeline 6-volt absorbedglassmat (AGM) battery.
13.03 8 Whelen 870 Series white quartz halogen scene light with 8-32°optics, model number 810CAOZR ((or
current model), located as shown on drawing.
13.04 6 Whelen 508 Series low level perimeter scene light with 8.32 ° optics, model number 580CAAZR (or
current model), located as shown on drawing.---
13.05 7 15A-12Vdc power outlets mounted in stainless steel wall plate, located as shown on drawing.
Strearnlight "Light Box" model 45102 (or current model) truck mount 12Vdc direct wire lights.
Whelen 295HFS1 A (or current model) siren.
Federal Signal TS-100 (or current model) 100 watt speaker behind grill.
14.00 12VDC EMERGENCY LIGHTING: 14.01 1 Whelen model 800DHGP (or current model) green command strobe mounted on Will -Burt mast or
roof, location to be determined.
14.02 1 Whelen 60" Freedom LED lightbar, model FL2RRBB (or current model) with options 9LLTH60 and
FLD22020. Lightbar will have four (4) red, lour (4) blue, and two (2) clear LED Tight modules.
Lightbar will be mounted over windshield on custom fabricated 0.125" aluminum light bar bracket
painted to match body.
Whelen PLAST4V (or current model) polished chrome vertical housings for four 600 series
lightheads.
Whelen 600 series LED amber turn signal light heads with populated arrow shape and multiple tlasll
katterns, model number 60AOOTAR (or current model).
14.04 Whelen 600 series max intensity LED brake/tail light heads, model number 60ROOXRR (or current
model).
Whelen 600 series max intensity LED Back-up light heads, model number 6000OWCR (or current
model). --
14.06 Whelen 600 series Super -LED lighthead, color LED's with color outer lens, model 60'02FS'R (or
current model). Available colors: amber, blue or red; includes chrome flange 6EFLANGE (or current
model). Located as shown on drawing.
14.07 Whelen 900 series Super -LED lighthead, color LED's with color outer lens, model 90'"5S'R (or
current model). Available colors; amber, blue or red; includes chrome flange 90FLANGC (or current
_ model). Located as shown on drawing.
- 14.08 Whelen 2 channel LED flasher with 5 Scan -Lock flash patterns for LED lightheads, model ULF26 (or
current model). --
13.02
13.06
13.07
13.08
14.03
14.05
2
1
1
12
8
3
Copy 431 Miami (FL) Police Dept MCC3OLLS260-03 (KP.2) 9 4/20/2005
LDV
Section
14.09
Oty
LDV, rrn:.
180 Industrial Drive
Burlington, WI 531GS
800.558.591)6
for262.263.0i b
www,ldvuso.coi!n
12VDC WIRING REQUIREMENTS:
1. 2-gauge minimum copper stranded battery cable shall be used for 12Vdc main supply lines. All
cable runs shall be full length, no splices. All cable terminals shall be staked and soldered. All cable
shall be enclosed in convoluted polyethylene tubing and the ends of the cable shall be sealed with
color -coded shrink-wrap identifying the function of the cable.
2. All added electrical circuits shall be protected from over -current by resettable circuit breakers
appropriately rated for the load. Only circuit breakers shall be used in the installation of added
electrical wiring (plug type fuses are unacceptable).
3. Circuit breaker functions shall be identified by engraved or printed labels.
4. All added wiring for load runs shall be AWG 8, 10, 12, 14 and 18 and must conform to MIL-W•�
16878F.
5. Wire terminals for added circuits must conform to MIL-T-7928. Terminals shall be insulated,
insulation grip, TYPE II, CLASS 2 and shall be crimped with tooling recommended by the terminal
manufacturer.
6, All wiring shall be numbered or lettered on 6" centers minimum.
7, All wiring shall be protected from chafing and abrasion with convoluted polyethylene tubing.
8. Where wire passes through sheet metal, bulkheads and structural supports, plastic grommets
shall be used to protect both wiring and wire looms.
9. All wiring shall be supported on 12" centers.
10. All wire bundles shall be lied with trimmed nylon ties on 6" centers minimum.
11. The complete 12Vdc wiring system and electrical appliances shall be 10 modern automotive
standards throughout the installation. - ---
12. Extreme care shall be exercised to provide for easy serviceability of the system in future years.
13. Extreme care must be taken in the installation to avoid the engine manifold, engine exhaust, and
muffler, which could expose the wiring to severe overheating during long periods of operation.
Proper insulation and heat deflection panels must be installed in such areas.
14. A high -current 12Vdc system wiring schematic shall be provided.
15. These are the minimum acceptable 12Vdc wiring requirements.
15.00
15.01
15.02
AUDIO/VIDEO:
Samsung SyncMaster 151 MP (or current model) 15" wall mount color LCD TV/monitor. Product
features:
• High resolution: 1024 x 768.
• 15" display with 140° horizontal and 120 ° vertical viewing angle.
• RCA connectors for CVBS and audio input, RF connector for antenna/cable input, 1 S-video mini -
din input and 1 Dsub15P for VGA input.
• 16.7 million colors.
• Analog modular TV tuner included.
• Built-in 3 watt, 2 channel speakers with surround sound.
• HDTV Ready (NTSC only).
Samsung SyncMaster 171 MP (or current model) 17" wail mount color LCD TV/monitor. Product
features:
• High resolution: 1024 x 768.
• 17" display with 170° horizontal and 170 ° vertical viewing angle.
• RCA connectors for CVBS and audio input, RF connector for antenna/cable input, 1 S-video mini -
din input and 1 Dsub15P for VGA input.
• 16.7 million colors,
• Analog modular TV tuner included.
• Built-in 5 watt, 2 channel speakers with surround sound.
• HDTV Ready (NTSC only).
Copy at Miami (FL) Police Dept MCC30LLS2S0.03 (KP.2) 10
4120/2005
LD11
aty
Section
15.03
15.04 7
15,05 1
15.06
15.07
15.08
15.09
15.10
15.11
15.12
1.DV, Inc.
rao Indusinal Drive
Burlington, WI 53105
800.355.5996
Fox 262.763.0156
www.idvuso.com
2 Samsung SyncMaster 211 MP (or current model) 21.3" wall mount color LCD TV/rnonitor. Product
features:
• High resolution: 1600 x 1200.
• 21.3" display with 170° horizontal and 170° vertical viewing angle.
• 16.7 million colors.
• Modular TV tuner.
• HDTV Ready (NTSC only).
• Wall mount bracket. ---
Vesa-standard 75 mm wall mount with quick -release.
Samsung LTN406W (or current model) 40" wall mount color LCD TV/monitor located as shown on
drawing. Product features:
• High resolution: 1280 x 768.
• 40" display with 170° horizontal and 170° vertical viewing angle.
• 16.7 million colors.
• Built-in NTSC tuner.
• Dimensions: 39.75" w x 28" h x 2,25"d.
• HDTV Monitor.
• Wall mount bracket (option).
Marshall Electronics V-LCD20 (or current model) 20" active matrix color LCD panel with TV tuner
viewable from the curbside exterior, under awning. Product features:
• Ultra bright - 450cd.
• 20.1" display (viewing area).
• 8-bit color with 640 x 480 resolution.
• 181 channel, cable -ready TV tuner.
• Dimensions: 20" W x 17" H x 2.5"D. -
Mount for exterior viewable 20" LCD monitor. Includes low-e glass, flush mounted weatherproof -
speakers and speaker amplifier.
Weatherproof exterior door to access rack mounted audio/video/telephone equipment. Door shall
hinge down and be used as a worksurface. Install one (1) Whelen #PSCABCCR LED compertment
light with automatic switch. ---
1 jMiddle Atlantic tfRSH4A9D rack mount kit for LCD.
3 Panasonic AG-VP300 (or current model) VHS Proline Hi-Fi VCR and Progressive -Scan DVD
Player. Product features:
• DVD/DVD-R/DVD RAM and CD-R/RW Playback
• 4 Head Hi-Fi VHS recorder and SQPB (SVGS quasi playback)
• Progressive playback capability
• Music with Picture button
• Multiple DVD Viewing Options
• Composite, S-Video and Component outputs
• Optical Digital Audio output for Dolby Digitalaand DTS
Middle Atlantic rack mount kil for VCR, VCR/DVD, DSS receiver.
Winegard Sensar RV-3090 amplified TV antenna with outlets at each TVNCR location, Includes
dash mounted warning light with interlock to prevent moving the vehicle with antenna raised.
1
15.13
15.14
1
CATV inlet with outlets at each TV/VCR location.
Exterior audio/video input jacks wired to TV locations.
Copy of Miami (FL) Police Dept MCC3OLLS260.03 (KP.2) 11
4/20)2005
LbV, inc.
=�` I80 Industrial Drive
- SuringSon, WI 53103
800.358.a986
Fox 262.763.0 156
LDV- �� www,ldvWO.cam
Section 1-OW
15.15 1 Sony Ut -20 (or current model) A6 color video printer with the following features:
• 400 dpi resolution.
• 4 frame memory.
• Analog video inputs and outputs.
• RS-232C interface.
• Monitor loop -through.
15.16 1 Everlocus color camera and Louroe #ASK-4 (or current make/model) audio/video surveillance kit in
the conference area looped through the video switch at each TV location and routed to the VCR to
record. 14.09 1 Clarion VMA6593 6.5" Color LCD mast camera monitor. Monitor shall be rack mounted near mast
controls.
15.18 1 MotoSat DataStorm (or current model) two-way Internet satellite system with optional dual LNB for
DirecTV television reception. Product features:
• Download speed of 700 to 1,500kbps.
• Upload speeds between 30 to 90kbps.
• Automatic pointing to the DirecWay Satellite.
• Auto stow if the vehicle is moved.
• Auto stow if the vehicle rocks due to wind.
15.19 Twelve (12) months MotoSat DataStorm standard two-way internet satellite system service.
15.20 1 Channel Master model 63141FD (or current model) active multi -switch.
15.21 4 Hughes SD-HBH for current make/model) DIRECTV DSS receiver. UL and FCC approved.
15.22 1 Drake RMM12 (or current model) rack cage for Drake video modulators.
15.23 _1 Drake PS121 (or current model) power supply for RMM12 rack.
15.24 12 Drake VMM806AG (or current model) video modulator for RMM12 rack.
15.25 1 Drake PC1201 (or current model) twelve -input passive combiner.
15.26' 1 Drake 1601 PC (or current model) sixteen -input passive combiner.
15.27 1 Drake # CRF1000-LP-56-58 Channel filter. ---
15.28
15.29
16.00
16.01
Prewire and make installation provisions for customer installed microwave receiver and antenna.
All RF cable for DSS antenna systems (when specified) shall be Belden #9116 series 6 broadband
coaxial cable. All other video cabling shall be Belden #1505A RG-59/U precision video cable.
MAST AND MAST MOUNTED EQUIPMENT: -•
2 Will -Burt model TMD-6-25.368 25-ft. heavy-duty non -locking exterior telescoping pneumatic mast
with the following:
1. 2-gal„ 1/2-hp Thomas Ultra Air-Pac tank and compressor.
2. Airline filler, lubricator and regulator.
3. Control valve and dump valve.
4. Will -Burt magnetic mast extension warning kit with warning light at mast control location and at
drivers location.
5. 40-ft of Nycoil to enclose cabling to top of mast.
6. Will -Burt 902526 external mount shelf bracket and 902545 external mount support bracket.
7. Interlock to prevent moving the vehicle with mass raised.
2 Custom fabricated Nycoil cylinder with powder coated finish to match body color.
2 Fabricate and install aluminum mast cover painted to match body color.
16.02
16.03
Copy of Miami (FL) Police Dept MCC30LLS260.03 (KP.2) 1 2 4/20/2005
LD
Section Oty
16.04
16.05
2
1
Will -Burt D-TEC mast safely system mounted on mast. System features:
• High voltage sensor aides operator in detecting overhead power lines.
• Anti -collision sensor automatically stops mast extension, assisting operator in detecting overhead
obstructions.
• Tilt sensor ensures that vehicle is level and D-TEC is pointing directly upward prior to mast
extension.
• 35 watt quartz halogen look -up spot light to illuminate area directly above mast. w,
LDV, Inc.
J80 industrial Dive
t3urhngron, WI 53105
800.558.3986
Fox 262.763.0 r56
www.ldvuso.com
Camera system installed on mast:
1. Pelco PT57024P (or current model) medium -duty pan & tilt.
2. Pelco MPTAZ24DT (or current model) combination pan, tilt, zoom controller with rack mount kit.
3. Pelco EH4722-2 (or current model) 22" outdoor camera enclosure with heater and blower.
4. Altronix T24130 (or current model) 24Vac / 100VA transformer.
5. lkegami ICD-870-24 (or current model) 1/3" CCD ultra -high performance color video camera
requiring a minimum object illumination of 0.1-lux/F1,4,
6. Pelco 13ZD5.5X30 (or current model) 1/3" CS mount CCD lens with a 30X f 1.8 lens range from
5.5 to 165•mm.
17.00
17.01
RADIOS ----
Primary 12Vdc power leads for communications radios shall be minimum 2-gauge copper stranded
wire with soldered crimp -on end connectors (gauge based on radio requirements). Cables shall be
enclosed in convoluted tubing and function identified with colored shrink-wrap. Power to radios shall
be controlled by a continuous -duty switch actuated by the auxiliary battery disconnect switch.
17.02
17.03
17.04
15
1
Prewire and make installation provisions for communications radio. Installation includes:
1. NMO-style base on the roof or antenna raceway, as applicable.
2. LMR195 antenna cable routed to radio transceiver location in Carlon Carflex ENT conduit.
3. 12Vdc power routed to radio transceiver location.
Install hinged panels under countertops to conceal radio transceivers where applicable.
Fabricate and install a 3" x 3" square aluminum tubing antenna raceway on the roof of the vehicle.
Antenna raceway will penetrate the roof on each side of the truck at radio box locations and in the
overhead console location to route cable to front shell location. Includes the following:
1. Raceway shall have a 3" high x 3" long aluminum cover at each antenna base on the side of the
tubing to access the antenna base and route cable to desired location. .
2. Access covers shall have four (4) stainless steel machine screws attaching the cover to the tubing
with a watertight seal. Install nut-serts in the Tubing to enable the covers to be removed and
replaced in the future.
3. Raceway shall permit running antenna cables between radio boxes on each side of the truck, and
the overhead console. Antenna cable for radios on the front shelf shall be run through the overhead
console directly to the radios.
16.00
3
18.01
18.02 12
18,03 1
18.04 2
18.05
1
TELEPHONE SYSTEM: _ _ Landline inputs to telephone system.
Telephone extension locations as shown on drawin_7c . ---
Cast Products, model FT41501, cast aluminum weatherproof landline input box with key lock._
Cast Products, model EB0008-1-A, cast aluminum weatherproof telephone box with key
Panasonic KX-TA624 (or current model) Electronic Modular Switching System. Base system has
capacity_for three (3) incoming lines and eight (8) extensions,
Copy of Miami (FL) Police Depl MCC3OLLS260.03 (KP.2) 13
4/20/2005
Section
r
Qty
18,06'
1
18.07
18.08
18.09
1-
1
10
3
18.10
9
19.02
19.03
19.04
19.00
19.01
19.05
19.06
19.07
19.08
20.00
20.01
20.02
20.03
20.04
1
1
1
8
1
1
1
1
1
1
LDV, Inc'..
180 Industrial Drivel
Burling Ion. WI 53105
800.358.5986
fax 262.763.0156
www,ldvuso.carn
Panasonic KX-TA62477 (or current model) Expansion Card, adds three (3) incoming lines and eight
(8) extensions, increasing the system capacity 10 six (6) incoming lines and sixteen (16) extensions.
Panasonic KX-T7730-B black twelve -line speakerphone telephone with 16-digit alphanumeric LCD
display. _
Panasonic KX-T7720-B black twelve -line speakerphone telephone.
Telular Phonecell fixed wireless terminal. Model to be determined based upon cellular standard of T
local serviceprovider.
All telephone lines and cellular antenna cable shall be installed in Carlon Flex -Plus ENT conduit.__.
COMPUTER NETWORK AND EQUIPMENT:
RJ•45 100Base-T CAT5 computer network jacks located as shown on drawing. All CAT5e cable
shall be installed in Carlon Flex -Plus ENT conduit.
Upgrade computer network jacks, 6110•RO6 (or current model), and cabling to CAT6, Ref. GB
4/99918708.
Leviton 69586-U12 (or current model) 12-port Cat6 rack mount patch panel. -
Middle Atlantic RK2 (or current model) two space rack enclosure.
Certified 36" CAT5e patch cord for printer. ----
Certified 36" CAT6 patch cord.
Cable Certification Report confirming that network wiringcomplies with CAT6 specifications.
Brother MFC-8500 (or current model) lull -feature tax, laser printer, and convenience copier with a
9600 x 9600 dpi (interpolated) resolution scanner. Includes HP EN3700 ( or current model) jetdirect
print server.
Note: Fax feature is only available when a C.O. line is connected to the vehicle.
MISCELLANEOUS ELECTRONICS:
Optex Vision alarm system. System includes magnetic contacts on all entry doors, exterior storage
compartment doors, battery box doors, generator compartment doors and hood. 360° ceiling
mounted motion sensors, siren and bell.
Note: If vehicle is equipped with a Telular Phonecell the alarm system will be wired to the Phonecell
to allow the customer 10 program a telephone number that will be dialed automatically if the alarm
system is triggered. This Phonecell will be wired to constant hot 12Vdc power source.
Columbia Weather Systems Capricorn 2000TM rack mounted weather station with LCD touch screen
display and removable two-piece 12' overall height aluminum mast for wind sensors. Sensors
included with system:
• Wind speed
• Wind direction
• Interior temperature
• Exterior temperature
• Barometric pressure r�
Columbia Weather Systems Weatherview 32 software and serial cable, 48273 for the Capricorn
2000.
Columbia Weather Systems self aspirating radiation shield for exterior temperature sensor. __,__i
Copy of Miami (FL) Police Depl MCC3OLLS260.03 (KP.2) 14
4/20/2005
Section fifty
LDV, Inc.
180 fnclustriol Drive
Burlington. WI 53105
800.558.5986
Fox 262.763.0156
www.ldvuso.cflrr .
-r
20.05 1 Garmin StreetPilot III GPS. Product features:
• High -resolution sixteen -color display mounted near driver.
• High-performance 12-channel parallel channel GPS receiver for quick satellite acquisition.
• Shows interstates, state highways, plus rivers and lakes in the U.S., Canada, and Mexico.
• Has audible alarms with voice prompts.
• Includes one (1) City Navigator CD-ROM, PC interface cable to download street level maps from
CD-ROM to a 32 MB data card (MetroGuides).
20.06 1 Bogen TPU-15 (or current model) paging amplifier with four (4) Whelen SA3148 (or current model)
speakers interfaced with PIA features of the telephone switching system.
20,07 2 Franklin Instruments #FD254--100.0P4 (or current model) clocks with 2.5" LED display and 12 hour
or 24 hour modes.
20.08 1 Intel itec Emergency Time Manager, 400-00775.000 (or current model) clock and timer with this
following functions:
• Time of day in hours and minutes.
• Sweep second hand.
• Elapsed time in hours and minutes.
• 4 alarm timers in 1, 2, 5 and 10 minute increments.
20.09 1 Middle Atlantic Products, Inc., MRK•4026, forty -space 19" wide x 26.5" depth (24" useable depth)
open framed electronics equipment rack, located as shown on drawing. Rack will slide out from its
fixed position to allow side access to rack equipment.
20.10 1 Middle Atlantic MW-4FT top fan panel, with two (2) 50 cfm ventilation fans, OFAN.
20.11 1 Middle Atlantic PFD-40 plexiilas front door with key lock.
21.00 RADIO INTEROPERABILITY SYSTEM:
21.01 1 Raytheon JPS ACU-1000 Equipment Bundle, includes:
• ACU-1000 card cage
• PSM-1A power supply module
• CPM-2 control processor module
• I-ISP-2 handsel speaker module
21.02 8 DSP-1 Radio Interface Module (one per radio)
21.03 2 PSTN-1 Telephone Interlace Module (one per telephone line).
21.04 1 Control Site Software (to be loaded on a remote PC).
21.05 1 aeration Manual.
21.06 -- 8 Custom radio cables (one per radio). _
22.00 EXTERIOR STORAGE COMPARTMENTS:
22.01. 1 Single door underbody storage compartment with approximate interior dimensions 15" high x up to
24" wide x 25" deep constructed from 0.125" aluminum with all welded seams,
22.02 1 Single door underbody storage compartment with approximate interior dimensions 15" high x up to
48" wide x 25" deep constructed from 0.125" aluminum with all welded seams.
22.03 1 Double door underbody storage compartment with approximate interior dimensions of 15" high x up
to 72" wide x 25" deep constructed from 0.125" aluminum with all welded seams.
Copy of Miami (FL) Police Depl MCC3OLLS260-03 (KP.2) 15
4/20/20015
LD
f.oV, 1nC.
AWN-f 80 Indus Iriar Dime
VJ1
For 262,763.0 t56
www.Idvusa,corn
Section
Oty
22.04
Compartments will be constructed to the following specifications:
1. Sweep out type bottoms with 1/2" drain holes.
2, 2" box pan doors and door frames fabricated from 0.125" aluminum.
3. Door frames shall be riveted to the body and welded to the compartments.
4. Compartments shall have a dome light that illuminates when the door is opened.
5. Compartments shall have dri-deck material install with tapered front lip.
Compartment doors will be constructed to the following specifications:
1. Stainless steel hinges attached with stainless machine screws.
2, Slam latches and stainless rotary D-ring handles with CH545 keys.
3. 0.100" bright polished aluminum diamond plate on interior surfaces fastened with stainless
hardware.
4. All horizontally hinged doors shall be held open in a 120° position with gas charged lifVsupport
cylinders.
5. All doors shall be sealed with industrial grade neoprene gasket.
23.00
AWNING: - ----
23.01
1
Zip Dee AutoAwn automatic awning (color - to be determined), product features:
• Length: 19' minimum to 23' maximum.
• 100% vat -dyed acrylic fabric with a manufacturer five year guarantee against loss of color or
strength due to normal exposure, including sunlight, atmospheric chemicals and mildew or rot.
• Polished aluminum slatted wrap around cover.
• Plastic rollers on body door corners to prevent awning damage.
• Hand held remote control and fixed mounted push button control.
• Operates on 12Vdc power with pneumatic assist, with draw of less than 3 amps.
• Heavy duty "piston" support arms provide extra strong support to withstand wind and rain.
• Built in sensor automatically closes awning when wind speeds exceed 30mph.
• Manual override.
23.02
1
Zip Dee AutoAwn automatic awning (color - to be determined), product features:
• Length: 18'.
• 100% vat -dyed acrylic fabric with a manufacturer five year guarantee against loss of color or
strength due to normal exposure, including sunlight, atmospheric chemicals and mildew or rot.
• Polished aluminum slatted wrap around cover.
• Plastic rollers on body door corners to prevent awning damage.
• Hand held remote control and fixed mounted push button control.
• Operates on 12Vdc power with pneumatic assist, with draw of less than 3 amps.
• Heavy duty "piston" support arms provide extra strong support to withstand wind and rain.
• Built in sensor automatically closes awning when wind speeds exceed 30mph.
• Manual override.
r
24.00
OBSERVATION DECK AND LADDER:
24.01
1
15" wide roof access ladder on the rear of the vehicle, constructed using 1" dia. X 0.083" brush
finished tubular aluminum rails and aluminum grip strut rungs. Rungs shall be welded to the rails for
maximum strength. --
_
24.02
1
7.5-ft. long x 6.5-It. wide (approx. dims.) observation deck with NFPA 1901 embossed aluminum
0.125" tread plate floor and 42" high fold down OSHA compliant aluminum perimeter railing. The
railing will be constructed using 1'' sq. x 0.125" brush finished tubular aluminum, stainless steel
hinges and stainless steel quick -release pins. _______
25.00
LEVELING SYSTEM: --
Copy of Miami (FL) Police Dept MCC3OLLS260.03 (KP,2) 16
02012005
I.Dv, Inc.
riLOAIM.. 180 industrial Drive
•U)��
Fox 262.763.0136
www.fdvuso.com
—
Section
I Oty
25.01
1
_process.---
Heavy-duty Quadra MFG. Inc. Big Footw model OE-2 four point fully automatic one -touch leveling
system. System shall use 24" two-way straight acting jacks. System shall include an air ride dump
valve (if one is not provided on the chassis) to release the air from the air bags during leveling •
26.00
MISCELLANEOUS OPTIONS: _
26.01
1
Removable Quartet 36" x 24" RE -MARK -ABLE Ty porcelain -on -steel magnetic dry erase board.
Install dry erase board brackets on the exterior of the vehicle.
26.02
1
Heavy-duty zippered storage bag for exterior shell or dry erase board.
26.03
2
Kidde Pro Line 3-A: 40-B: C 5 pound dry chemical fire extinguishers.
26.04
3
First Alert 9-volt combination Carbon Monoxide and Smoke alarms.
27.00
LDV MANUALS
27.01
1
Complete manual set, including the following:
1. As -built specifications with interior and exterior drawings as used for production of the vehicle.
2. Chassis and body owner's manuals.
3. All individual component manuals and warranty registration cards as provided by component
manufacturers. Customer is responsible for completing warranty cards and mailing them fo
manufacturers.
4. LDV 12Vdc and 120Vac legends showing wire gauge, color, number and function.
5. LDV 12Vdc high current wiring diagram illustrating the battery system, isolators, power converters.,
alternator, disconnect switches and control panels.
6. LDV roof top antenna placement drawing and legend identifying antenna placements and
termination points.
7. LDV Audio/Video cabling diagram.
8. LDV Telephone system punch block wiring diagrams.
9. LDV Alarm system zones legend.
10. LDV warranty and Return Authorization procedures.
11. Chassis and generator maintenance and service logs.
12. Battery maintenance information.
28.00
MISCELLANEOUS -----
28.01
1
2
Set of Freightliner chassis parts and service manuals. _
28.02
Inspection/training trip to LDV facilities. Allowance of $1.000.00 includes roundtrip airfare, 2 day car
rental, 1 night lodging and $70.00 meals allowance. Minimum fourteen (14) day advance notice of
travel is required.
'Note: Any unused funds from allowance will be credited back to the customer.
28.03
At time of delivery an LDV representative will provide up to eight (8) hours of orientation on LDV
installed systems such as generator start up and shut down procedures, leveling system operation,
mast operation, basic audio/video system operation, basic alarm operation, awning set up, etc.
28.04
Note: LDV project scope does not include certain tasks or costs that are the responsibility of the
customer. These items include, but are not limited to: radio and telephone system programming,
activation and service fees for cellular telephones, satellite telephones, satellite TV, satellite Internet
service or other related subscriptions.
In the event of a discrepancy between the drawing and specification, the specification will
supersede. ----
Copy of Miami 1FL) Police Dept MCC3OLLS260.03 1KP.2) 1 7
4/20/2005