HomeMy WebLinkAboutGroup 1GROUP 1: WORK AND DRESS SHIRTS
MENS AND WOMENS KNIT DRESS SHIRTS
As or equal to Red Kap Style: #SP 60
Fabric:
65% Polyester/ 35% Cotton, 4.25 Oz., Poplin.
Finish:
Pre -cure durable press with soil release and wickable finish.
Design:
Short sleeve, placket front, two-piece collar, with double stitch trim detail (Western Style) on collar, placket, cuff
and front and back yoke.
Sleeve:
Short Sleeve, Stitched Cuff appearance, scalloped at outside center 2" wide and 3" from end, tapered to 2"
from end at inside. (Y scallop to accept markings or embroidery).
Placket:
Center front placket. Approximately 10" down from top/collar button 1 1/2" wide. Double stitched side and
bottom, with diagonal cross and box stitch last 1 %2" . Three (3) buttons on placket.
Pockets:
Two (2) button-thru functional flapped pockets with angled bartacks, sewn -down pencil stall in left pocket.
Breast pockets, patch type, about 4" wide by 4'/2" deep. Double stitch trim detail all four sides and at bottom of
"pseudo" flap. Flap effect about 1 '/" down from pocket opening.
Yoke Shoulder:
Separate two-piece yoke. Western style detail affected by scalloped double stitching. Placed front, each side
of collar, 2 1/2" from shoulder seam at sleeve, widened to point 4" from shoulder seam, then tapered to
approximately 3" at collar. Placed back 2" from shoulder seam at each sleeve, and approximately 4'/2" down
from collar seam at points each side of collar.
Collar:
Two-piece, lined, banded, topstitched with stays. Pointed with double stitch trim.
Closure:
Seven buttons with vertical button holes
Variations:
Color: Shall be available in a variety of colors, including white and medium blue.
Sizes: To be available in sizes to fit both men and women; may omit pocket if different style.
Care:
Industrial Wash.
IFB 199163 Uniforms, Citywide
MENS AND WOMENS OXFORD KNIT DRESS SHIRTS
As or equal to Edwards Garment, Style: # 9077 (Mens) # 5077 (Womens)
Fabric:
Oxford White or Blue, 60% cotton, 40% polyester, 4.4 Oz. Weight, Wrinkle Free (preferred), numeric sizing,
button down, long sleeve 50% Cotton, 50% Polyester, or 25% cotton 75% polyester. Permanent Press.
Design:
Long Sleeve, placket front, two-piece collar, with double stitch trim detail (Western Style) on collar,
placket, cuff and front and back yoke.
Sleeve:
Long Sleeve, Dual sleeve lengths, Stitched Cuff appearance, scalloped at outside center 2" wide and 3" from
end, tapered to 2" from end at inside. (3" scallop to accept markings or embroidery).
Placket:
Approximately 10" down from top/collar button 1 1/2" wide. Double stitched side and bottom, with diagonal
cross and box stitch last 1 %2" . Three (3) buttons on placket.
Pockets:
Left chest pocket or two (2) breast pockets, patch type, about 4" wide by 4'/2" deep. Double stitch trim detail
all four sides.
Yoke Shoulder:
Western style detail affected by scalloped double stitching. Placed front, each side of collar, 2'/2" from
shoulder seam at sleeve, widened to point 4" from shoulder seam, then tapered to approximately 3" at collar.
Placed back 2" from shoulder seam at each sleeve, and approximately 4 %2" down from collar seam at points
each side of collar.
Collar:
Two-piece, pointed with double stitch trim. Button down collar.
Variations:
Color: Shall be available in a variety of colors, including white and medium blue.
Sizes: To be available in sizes to fit both men and women's; may omit pocket if different style.
IFB 199163 Uniforms, Citywide
MENS MILITARY STYLE SHIRTS, LONG SLEEVE AND SHORT SLEEVE
As or equal to Liberty Uniform, Style: # 722MXX (Long Sleeve) 732MXX (Short Sleeve)
Fabric:
Shall be a Poplin weave, 65% Dacron Polyester, 35% Combed Cotton with a finished weight of 4.0 to 4.5 oz.
per square yard. Shall have a permanent press soil release finish.
Style:
Dress uniform shirt, seven (7) button placket front, banded collar, placket front, two (2) pleated patch pockets,
scalloped flaps with hook & loop closure, pencil opening in left flap, sewn -in military creases front and back,
epaulets, 2 -button barrel cuff with placket vent and center button (L/S), sling badge tab.
Collar:
There shall be a banded collar. The points shall be 3'/4" long. There shall be permanent collar stays. The
interlining shall be woven polyester or canvas. The collar shall be topstitched'/" from the edge and shall close
with a 19 ligne button.
Shoulder Straps:
The shoulder straps shall be pointed at the end toward the neck of the shirt. The other end shall be sewn in
sleevehead. Strap to measure 2" at the sleeve and tapered. Strap to be box -stitched to shoulders with row of
cross-stitching 2".
Badge Reinforcement:
Shall have a 2 -ply sling -type badge reinforcement inside left front of shirt 1-1/8" wide. Shall be centered and
secured. Two button hole eyelets are to be spaced approximately 1-1/4" apart with the bottom eyelet
approximately 1-1/4" from the top of the left pocket flap.
Front:
There shall be a full separate placket on the left front, 1 %2" wide, sewn on, having one buttonhole on the collar
stand and buttonholes on the front spaced 3'/2" apart. The right front shall be plain with a minimum turned
back facing of 1 '/4". There shall be no raw edge on this facing. 19 ligne buttons shall be attached to the right
with corresponding buttonholes on the placket. There shall be an extra button at the bottom of the right front.
Pockets:
There shall be two (2) pleated patch pockets. They shall be 5 '/" wide with mitered corners and 6 Y2" high
(finished with flap). There shall be a center pleat 1 %2" wide. The flap shall be 5 ''/2" wide and 6" deep,
scalloped type. The flap shall finish clean underneath. The sides shall be 2 '/2" high and the center shall be
23/" high. There shall be a vertical stitched in crease through the center of the flap and in the center of the
pleat in the pocket. There shall be a 1" wide pencil opening in the left flap to correspond with the sewn in
pencil compartment in the left pocket. Top stitching shall be 1/32" on all sides of the pockets and flaps with a
double needle stitch spaced '/4" at the top of the flaps. There shall be a stitched closed buttonhole and non-
functioning 20 ligne button, both on the flap. The flaps shall close with a hook and loop closure under each
corner of the flap. This shall identically match the color of the shirt.
Sleeves:
Long sleeves shall be straight and whole with pleats, gauntlet style. Top placket on the sleeve vent shall
measure 1" wide and 6" long to the point, with a 5" opening. Bottom welt shall be 1/2" wide. There shall be a
center button and buttonhole in the placket.
Cuff: Barrel cuff on the long sleeve shall be 2 7/8" wide with a two (2) button adjustable closure.
IFB 199163 Uniforms, Citywide 3
Yoke & Back: There shall be a two (2) piece yoke, stitched and turned. Yoke shall be 3'/" below the collar
seam in back.
Buttons: Shall be first grade, pearlescent plastic, 4 -hole, 19 ligne, dyed to match the shirt color.
Sewing:
Collars and pocket flaps shall be stitched 1/8" from edge. Side closing and sleeve setting shall be made with a
safety stitch type machine. All stitching will be a fast color vat dyed, spun -polyester thread with no fewer than
12 to 14 stitches per inch. Bottom hem shall be a continuous hem approximately 3/8". No gussets.
Interlining:
Collar, collar band, placket front, cuffs, pocket flaps and epaulets shall be interlined with 100% woven polyester
taffeta or canvas.
Variations:
Short Sleeves - straight and one piece with'/2 hem and finish approximately 9" from shoulder.
Long Sleeves - 32" to 35", single button cuff appropriate length for women.
Colors:
Silver Tan (722MTN), Police Blue (722MPB), Navy Blue (722MNV), White (722MWH).
MENS AND WOMENS STANDARD WORK SHIRTS
As or equal to Red Kap: # SP 24 (Men's Short Sleeve); SP 14 (Men's Long Sleeve); # SP 23 (Women's
Short Sleeve); SP 13 (Women's Long Sleeve).
Fabric:
65% Polyester / 35% Cotton, 4.25 Oz., Poplin. Pre -cure durable press with soil release and wickable finish
Style:
Sport type, French front, full cut with dress shirt tails. Minimum 5 buttons & snap for closure.
Pockets:
Two breast pockets. Left pocket to have pencil division. Two button-thru, hex -style pockets with angled
bartacks, bartacked pencil stall in left pocket. Pockets (with or without Flaps Optional) to contain heavy angled
bartacks at all strain points.
Collar:
Convertible type, 3 -ply. Blouse style collar not acceptable. Interlining 100% polyester with permanent collar
stays. Two-piece, lined, sewn -in stays.
Backs:
Double yoke width at minimum point 2-1/4". Separate two-piece yoke.
Stitching:
Shirts to have Merrow stitching for sleeving operation and closing operation or overlock with safety stitch.
Stitched -down front.
IFB 199163 Uniforms, Citywide 4
Sleeves:
1. Short sleeves, approximately 9" in length for men's sizes, cuffed no less than 3/" doubled. Single stitched
hem.
2. Long sleeves to have single button through closure on each sleeve.
3. X -long sleeves in excess of standard lengths, with single button through closure.
Sizes:
Shall be available in all sizes to fit both men and women.
Colors:
Shall be available in a variety of colors - minimally, those listed here: white, light blue, dark blue, grey green
(medium dark) light green and other colors shown in catalogue.
As or equal to Red Kap, Style # SC 10 (Men's Long Sleeve); # SC 20 (Men's Short Sleeve)
Fabric:
100% Cotton Pre -Shrunk, 5.25 Oz., Twill.
Pockets:
Two button-thru hex -style pockets with angled bartacks, bartacked pencil stall in left pocket.
Collar:
Two-piece, lined, no stays.
Backs:
Separate two-piece yoke.
Mainseams:
Polyester and polycore thread on mainseams.
Facing and Closure:
Stitched -down front. Six buttons with vertical button holes, plus button at neck.
Care:
Industrial Wash.
Sizes:
Shall be available in all sizes to fit men.
Colors:
Graphite Gray, Khaki, Light Blue, Navy, Postman Blue, Spruce Green, White.
IFB 199163 Uniforms, Citywide
GROUP 2: WORK TROUSERS, DRESS SLACKS, AND PANTS
MENS AND WOMENS WORK TROUSERS
As or equal to Liberty Uniform, Style # 60OMNV (Men's Mindnight Navy) # 600FNV (Women's Midnight
Navy)
Fabric:
100% Dacron Polyester, 6.28 Oz., per sq. yd.
Design:
Trousers shall be made with a plain front, straight side pockets, two back pockets.
Pockets:
There shall be two (2) front quarter top styled pockets, with a minimum opening of 6". The swing type pocket
bag shall be 7'/2" deep. There shall be two (2) rear hip pockets. They shall be 5'/" wide. The left pocket shall
have a button and hole closure. This shall be a Reece, double -welted style pocket. The pocket bag shall be 6"
deep. All pocket openings to be heavily bartacked to insure long wear.
Pocketing:
Shall be 50% polyester, 50% cotton, 260 -weight drill and shall withstand all pilling for a minimum of 30
wash cycles. Color shall be charcoal grey.
Waistband:
Shall be hall be approximately 2" wide, with a button and button hole for closure, with Snugtex (male) and Ban
Rol. The female trouser shall have a shirred elastic waistband from side seam to side seam around the back.
There shall be a curtain made of the same fabric and color as that of the pocketing. On the outside of the
waistband, along the seam where the waistband is joined to the body of the trouser, there shall be a topstitch
to secure inside the curtain.
Belt Loops:
Must have a minimum of 6 belt loops. These shall be of shell material and interlined. They shall be bartacked
on at the top and turned down over the bartack. Shall be tacked at the bottom. Shall be 3/" wide of double
thickness, stitched on the face side with a two needle machine, and 2 1/8" long to accommodate a 1 3/" wide
Garrison style belt. The belt loop at the side seams shall be set to the back of the side seam 5/8" to facilitate
striping of needed.
Zipper:
Trouser shall be closed with a Talon #5 ( or approved equal) solid brass spring lock zipper. Zipper tape to
match fabric and perma-press treated. A straight bartack shall be sewn at the bottom of the fly. Shall
withstand all laundering and pressing for the life of the garment. Shall be self-locking style.
Inseam:
Shall be proportionally graded to average 37" open bottom.
Hem:
Bottom of trousers should be finished plain, without cuff, with a minimum circumference of 18" , and with at
least a 2" him. Length according to ordering instructions.
Seaming:
Trousers to seamed with polyester core thread and seat seams.
Leg seams: Shall be overlock safety stitched.
IFB 199163 Uniforms, Citywide 6
Sean seam: Shall be double needle sewn with a minimum 2 '/2" outlet.
Finishing:
To be stitched with a tandem needle machine. Trousers shall be made in a first workmanlike manner and
properly pressed with side seam, inseam and seat seam pressed open.
Bartacks:
There shall be bartacks at the top and bottom of the quarter top pockets, the ends of the hip
pockets, the base of the fly and one bartack securing the inside of the right fly to the left fly about 1" above the
bottom of the zipper.
Thread: All thread shall be color fast, polyester core, two ply. This shall identically match the fabric color.
Sizes:
1. Men: Waist sizes to be available in all odd and even sizes form 28" to 38" and even sized from 40" to 54".
The leg sized and length should increase by normal standards in accordance with waist size. Trousers with
waist sizes 38" and larger shall have full cut seat measurement.
2. Women: Trousers shall be available in standard women's waist sizes (even sizes: 4 to 28) with cut and
length to vary according to standard industry practice.
Colors:
600MNV (Men's Midnight Navy)
600FNV (Women's Midnight Navy)
MENS AND WOMENS NON -PLEATED PANTS
As or equal to Edwards Garment, Style # 2510 and 2510L (Mens) and # 8519 and 8519L (Womens)
Fabric:
65% Polyester / 35% Cotton, 7.5 Oz.,
Design:
Flat Front.
Pockets:
Two front and back pockets (Mens)
Two front pockets (Womens)
Waistband:
Ban -Rol®, waistband. (Men and Women)
Waistband sits just below natural waistline and straight leg (Women)
Front and Zipper:
Hook and eye closure with brass zipper (Mens)
Hook and eye closure (Womens)
Sizes:
Style 2510 (Mens): 28 — 42
Style 2510L (Mens): 44 — 54
Colors (Mens and Womens):
White, Navy, Dark Grey, Black, Khaki.
Style 8519 (Womens): 0 — 18 Style 8519L (Womens): 18W — 28W
IFB 199163 Uniforms, Citywide
MENS AND WOMENS PLEATED PANTS
As or equal to Edwards Garment, Style # 2610 and 2610L (Mens) and # 8676 and 8676L (Womens)
Fabric:
65% Polyester / 35% Cotton, 7.5 Oz.,
Design:
Pleated front.
Pockets:
Two front and back pockets (Mens)
Two front pockets and one back pocket (Womens)
Waistband:
Ban -Rol®, waistband. (Men)
Waistband sits just below natural waistline and straight leg (Women). Hidden stretch waistband.
Front and Zipper:
Hook and eye closure with brass zipper (Mens and Womens).
Sizes: Colors (Mens):
Style 2610 (Mens): 28 — 42 White, Navy, Dark Grey, Black, Khaki, Olive,
Style 2610L (Mens): 44 — 54 Sand.
Style 8676 (Womens): 0 — 18 Colors (Womens):
Style 8676L (Womens): 18W — 28W Navy, Black, Khaki.
MENS AND WOMENS WORK TROUSERS
As or equal to Red Kap, Style # PT20 (Men's) and # PT21 (Women's)
Fabric:
65% Polyester / 35% Combed Cotton, 7.5 Oz., Twill
Design:
• Front & back pockets
• Jean style waistband w/ button closure
• Touchtex II®
Pockets:
Two slack -style front pockets, two set-in hip pockets, left has button closure, darts over hip pockets for better
fit.
Waistband:
Innerlined for body and shape, folder -set band with outlet
Finish:
Post -cure durable press
Closure:
Heavy-duty brass ratcheting zipper, button closure
IFB 199163 Uniforms, Citywide 8
Sizes:
Men: 28 — 60
Women: 2 -24
Colors:
Black, Brown, Charcoal, Khaki, Navy, Spruce Green, White.
MENS TACTICAL PANTS
As or equal to 5. 11, Style # 74273
Fabric:
65% polyester / 35% Polly cotton ripstop. Treated with HT Teflon® wear resistant finish.
Pockets:
Magazine/cell phone pocket, two cargo pockets, and patented slash rear pockets. External knife pocket.
Sizes:
Waist: 28 — 54
Length: 30 - 36
Colors:
Black, Coyote Brown, TDU Khaki, TDU Green, Tundra, Dark Navy, Coyote.
As or equal to 5.11, Style # 74251
Fabric:
100% Cotton canvas, 8.5 Oz. Double and triple -stitch construction. 48 bartacks in high stress areas.
Pockets:
Patented rear strap and slash pocket design. 7 pockets.
Waistband:
Self-adjusting comfort waistband.
Sizes:
Waist: 28 — 54
Length: 30 - 36
Colors:
Charcoal, Black, Grey, Khaki, Walnut, Brown, Coyote Brown, OD Green, Tundra, Fire Navy, Sage.
IFB 199163 Uniforms, Citywide 9
GROUP 3: SKIRTS
WOMEN'S STRAIGHT SKIRT WITH POCKETS 100% POLYESTER
As or equal to Edwards Garment, Style # 9799
Fabric:
100% Polyester knit, 10.5 oz., Soil release, wick finish.
Design:
A line skirt with back zipper, 1" - 2" waistband with side elastic insets. Rear kick pleat.
Pocket:
Two slash pockets.
Zipper:
As or equal to Talon #769 nylon with memory lock slider and bottom stop. Permanent press finish.
Seaming and Finishing:
Entire garment to be sewn with polyester thread. To be made with first class workmanship, all loose threads
removed, and pressed completely and properly side seams pressed open
Sizes:
Misses' sizes 0 — 18
Women's sizes 18W — 28W
Colors:
Navy, Black, Dark Navy, Heather Gray.
WOMEN'S STRAIGHT SKIRT WITHOUT POCKETS 100% MICROFIBER
As or equal to Edwards Garment, Style # 9792
Fabric:
100% Microfiber, 6.5 oz.
Design:
Soft touch wrinkle resistant fabric. Flat front straight skirt with no pockets and contour waist. Rear kick pleat
and fully lined.
Waistband:
Waistband sits just below natural waistline
Sizes:
Misses: 0 —18
Women's: 18W -28W
Colors:
Tan, Navy, Black.
IFB 199163 Uniforms, Citywide 10
GROUP 4: SHORTS
MEN'S STRETCH CARGO SHORTS
As or equal to Sportif, Style # 630170
Style:
Cargo shorts, six (6) pockets.
Fabric:
65% Polyester, 32% cotton, 3% Lycra. Finished weight 7 to 8 oz. Permanent press with soil release.
Pockets:
Two slit front, four (4) patch with button flap (two -front and two rear). Slit pocket opening approximately 6-1/2"
with reinforced pocketing. Other to open at least 5-1/2". All to be at least 6" deep. Patch pockets to be firmly
bartacked at each corner.
Waistband:
Minimum 2" waistband with button closure. Material to be 65% polyester/35% cotton and harmonize with
garment, waistband to be continuous closed, with non -roll stiffener.
Belt Loops:
At least five (5) loops for small sizes (up to 30"), and at least 6 for larger sizes. Loops to be double thick, at
least 3/<" wide. Two needle stitched on face side.
Zipper:
As or equal to Talon #769 nylon, with lock slider and bottom stop. Permanent press zipper tape, color to
match garment. Straight bartack at bottom.
Hem:
Finished plain without cuff, at least 2', to meet at approximately below mid-thigh.
Seaming and Finishing:
Entire garment to be sewn with polyester thread. Seat seam stitched with tandem needle machine. To be
made with first class workmanship, loose threads removed, and completely properly pressed, side, seat and in
seams pressed open.
Size:
28-46
Color: Black, Ink Blue, Light Green, Pewter, Silver Tan.
MEN'S AND WOMEN'S STRETCH PATROL SHORTS
As or equal to Mocean, Style # 1063M (Men's) and 1063W (Womens)
Fabric:
Stretch Factor TM shell. Double needle top stitching w/ bartacks on all stress points.
Waist: Static fit waist with back yoke, zipper fly, snap closure and 'Floating BeltloopsTM
IFB 199163 Uniforms, Citywide 11
Pockets:
2-J slashed pockets that allow easy access while wearing a duty belt.
2 -cargo pockets with gusset and Velcro'de flap.
2 -back pockets with zipper closures and flaps
1 -pen pocket with two pen ports
Sizes:
Men's: 28 to 54
Women's: 23 to 42
Color:
Black, Police Navy, National Navy, Sheriff Green, Khaki, Spruce.
POLYESTER/COTTON, TWILL SHORTS
As or equal to Flying Cross by Fechheimer, Style # 49330 (Men's) and 49330WT (Women's)
Fabric:
65/35 Polyester/Cotton, Twill. Weight: 6.5 -oz. per square yard.
Waistband:
Exclusive Freedom Fit waistband with 2 -zone stretch for support and comfort. Rubberized Tru -Grip waistband
curtain to effectively hold shirt tails in.
Front:
Crushproof hook and eye with fully functional French Fly
Belt Loop:
Interlined belt loops
Seams:
Inseams and outseams neatly serged and pressed for a smooth finish with pucker -free seams.
Size:
Men's: Short 28 — 40 (even only), Regular 28-56 (even only above 38)
Women's: Regular 2 — 24.
Colors:
LAPD Navy, O.D. Green, Silver Tan, Dark Brown, Black, Spruce Green.
IFB 199163 Uniforms, Citywide 12
MEN'S LAUDERDALE CARGO SHORTS.
As or equal to Sportif, Style # 610110
Style:
Stretch cargo shorts.
Fabric:
62% Cotton, 34% Polyester, 4% Lycra.
Pockets:
Patch cargo pockets and zippered back pockets.
Waistband:
Non -roll stretch waistband
Size:
Medium to 2XL
Color:
Black, Desert Tan, Ecru, Khaki Tan, Navy, Pewter, Royal, Teal, White.
IFB 199163 Uniforms, Citywide 13
GROUP 5: JUMPSUITS
As or equal to Walls Industries, Style # 1216
Design:
The coverall shall be designed to allow quick entry to the wearer and have maximum comfortability to facilitate\
speed of movement and flexibility.
Fabric:
Medium Weight 35% Cotton/ 65% Polyester Blend w/ Medium Weight Poplin.
Cutting:
The component parts of each coverall are to be cut from one piece of cloth to ensure the best weaving quality
and appearance.
Thread:
All stitching throughout the coverall must be done with 100% polyester thread.
Stitches & Seaming:
All stitches and seams operations must be accomplished with no less than ten stitches per inch. All stitches of
seams shall be locked stitched with double needle seaming operation.
Details:
The coverall shall consist of five major parts: left and right front, left and right sleeves and one-piece backs.
Zipper Front:
The front shall be closed with a heavy duty metal zipper 2 -way preferred. Behind the zipper there is to be a
two ply polyester cotton, two ply facing 1-1/2" wide extending the full length of the front caught in the crotch
seam finishing at the neck line. The zipper is to be double needle stitched to the front facing and firmly
bracketed at the crotched seam to prevent zipping off.
Pockets:
There is to be two bellows chest pockets, patch type, ten inches deep and eight inches wide. The pockets
shall be securely bracketed at the corners. Each thigh shall have pocket, patch type, box shaped measuring
eight inches in width and ten inches deep. Each pocket shall be securely bar tacked in the corners to prevent
ripping off. There is to be two patch type back pockets, left zippered, one on each corner.
Back:
The back of the garment shall have a bid swing feature to facilitate ease of movement. The turn over of the
back pleating to facilitate this feature shall be double stitched and firmly bar tacked at the shoulder and the
waist line.
Collar:
The collar is to be made of three ply material and shall be at least 3-1/2" wide at the center back neck. There is
to be a woven label in the neck line below the collar showing manufacturer's name, fabric, content and size.
Waist Sizes: Colors: Navy
Short: 38 to 50 and 54 (Even Sizes)
Regular: 36 to 60 (Even Sizes)
Tall: 40 to 60 (Even Sizes)
Extra Tall: 38 to 52 (Even Sizes)
11713 199163 Uniforms, Citywide 14
GROUP 6: COLD WEATHER GEAR
WINDBREAKER
As or equal to Liberty Uniform, Style # 560XXX
Fabric:
100% Polyester.
Design:
Snap front jacket, fully lined, drawstring bottom, elasticized cuffs, two slash pockets, set-in sleeves, shirt style
collar,
Pockets:
There shall be two (2) set-in welt style pockets. The welts shall measure 7" long and 1" wide secured with a
bartack at each end. The pocket bag shall be made of the same material as the lining. The color of the bag
shall be white.
Sleeves:
There shall be a one piece set-in sleeve. Each sleeve will have a 1/32" topstitch encircling the armhole. There
will be an elasticized cuff on each sleeve.
Waist:
There shall be a drawstring closure in the bottom hem of the jacket. The color shall match that of the jacket.
Collar:
The collar shall be a pointed, shirt style collar of shell material. This shall be fully interlined.
Sizes:
Small to XL
2XL to 4 XL
Color: #560MBK — Black
#560MBN — Brown
#560MGD — Gold
#560MGN — Spruce Green
#560MMA — Maroon
#560MFL — Fluorescent lime
#560MNV - Navy
#560MOR - Orange
#5601VIRD - Red
#560MRY — Royal Blue
#560MWH — White
IFB 199163 Uniforms, Citywide 15
WINDBREAKER WITH ZIP OUT LINER
As or equal to Liberty Uniform, Style # 526XXX.
Fabric:
100% Polyester
Design:
Zipper front to neck, self fabric shirt style collar, permanently nylon lined, open facing for optional zip -out liner,
two (2) upper pleated patch pockets with flaps, two lower vertical panel front pockets, shirred elastic waistband,
epaulets, adjustable button cuff, badge tab, side vent zippers.
Front:
There shall be a heavy-duty #5 heavy-duty black plastic molded non -freeze zipper front with inside storm fly. A
cord shall be inserted inside both fabric lips covering the zipper to assure that the slider does not catch on the
fabric.
Badge Tab:
There shall be a badge tab affixed to the left breast made of shell material. There shall be small, black, round
metal eyelets spaced 1 '/" apart. The total badge tab dimensions shall be 2'/" high and 3/" wide. The bottom
of the badge tab shall be vertically set 1" above the center of the left pocket flap.
Pockets:
There shall be two (2) upper breast pleated patch pockets with flaps. They shall be approximately 6" high and
51/4" wide. The pleat shall be 1 1/8" wide. The pointed flap shall be 2 3/" high at the center and 2 '/4" high at
the sides. The flap shall be secured with a removable metal button with cotter pin. There shall be bartacks at
the top pocket corners. Both the pocket and the flaps shall be topstitched '/" from the edge. There shall be a
pencil opening in the top of the left flap, 1" wide.
There shall be two (2) set in hand warmer pockets into the front panel seam. This seam runs from the
shoulder seam to the bottom of the jacket. The pockets shall have an opening of 6 '/". Pocketing shall be
made of shell material for extra strength. There shall be bartacks at the top and bottom opening of the pockets.
Epaulets:
There shall be two epaulets of self -material. There will be interlined. They shall have an "X" stitch by the
shoulder seam and be pointed at the other end by the collar. There shall be a removable metal button at the
pointed end. The epaulet will be tacked to the jacket at the pointed end.
Collar:
There shall be a shirt style, pointed, self -goods collar with a collar stand and a heavy non -woven interlining.
Sleeves:
Shall be one piece, set in style. There shall be a two button adjustable cuff of self -material. There shall be a
button on the inside lining of each sleeve to secure the zip -out liner sleeve.
Waistband:
There shall be a 2" shirred elastic waistband beginning at a point 7" from the front zipper. The front panels
shall be plain with no waistband.
Size:
Small to 4X -Large and 6X -Large.
Colors: #526MBK - Black
#526MBN - Brown
#526MNV - Navy
IFB 199163 Uniforms, Citywide 16
Zip -Out Liner:
Color: Black
Style: Zip -out liner, one inside cargo pocket, zipper track to sew into open facing of police windbreaker.
Fabric: 100% Nylon taffeta, Interlining: 100% Polyester fiberfill, 4.4 Oz., 100% Nylon tricot.
Sleeves: Knit cuffs. There is an elastic loop at the sleeve end to secure to a button on the inside of the
windbreaker sleeve.
Zipper: Shall be #4 aluminum zipper, interchangeable.
THREE (3) SEASON VERSATILE JACKET WITH ZIP OUT LINER (MEN)
As or equal to Red Kap, Style # JT36.
Fabric:
65% Polyester / 35% Combed Cotton.
Length:
Mid -length
Pocket:
Welted slash pockets and utility pocket on left sleeve
Collar and Waistband:
100% polyester 1 x 1 rib knit.
Liner:
Double-faced 100% nylon taffeta, quilted with 4.5 oz. 100% polyester and fiberfill sandwiched between
Size:
Small to XL
Colors:
Black, Brown, Charcoal, Navy.
11713 199163 Uniforms, Citywide 17
GROUP 7: INCLEMENT WEATHER GEAR
YELLOW PVC RAINCOAT
As or equal to Neese Industries, Inc., Style # 1450C.
Fabric:
Singly ply .25mm PVC.
Body Length:
48" Long
Collar and Hood:
Stand-up collar with snaps for hood. Detachable hood.
Features:
-Underarm vents
-Take up snaps on sleeves.
Size:
Men's and Women's: XS to 6XL
Color:
Yellow.
YELLOW PVC/POLYESTER RAINCOAT
As or equal to Liberty Uniform, Style # 581MYE.
Style:
Snap front with outside & inside storm fly, removable hood, badge eyelets, two slash "pass-through"
pockets, vented back, 49" average length.
Fabric:
Poly vinyl chloride (PVC) bonded to heavy weight polyester mesh backing. Weight: .35 mm.
Front:
Five (5) plastic, heavy duty front snap closure with both inside and outside storm flys.
Badge Tab:
Must have badge eyelets affixed to the left breast and shall be spaced 1 '/" apart.
Pockets:
There shall be two (2) outside slash, single welt "pass through" type pockets. They shall be 10" wide with a 2"
wide welt and approximately 7" deep. Pocketing shall be made of shell material for extra strength.
Collar:
Must have a 100% polyester corduroy collar of matching color to the color of the raincoat.
Sleeves:
Shall be one piece, raglan style. There shall be a snap to adjust the opening of the sleeve.
IFB 199163 Uniforms, Citywide 18
Hood:
There shall be a removable hood with draw cord. The hood shall attach with plastic snaps under the back of
the collar.
Air Vents:
The back shall have an open vent with hidden mesh panels for breathe ability. There shall be eyelet holes
under the arm pits as well.
Sizes:
Small to 4X
Colors:
Yellow
GROUP 8: CAPS AND HATS
BASEBALL STYLE FIVE PANEL POLYESTER ALL FOAM WINTER CAP
As or equal to Cobra Cap, Style # WFC.
Material:
Polyester all foam winter
Color:
Maroon, Navy, Grey, Black, Orange, Brown, Col. Blue, White, Kelly, Royal, Red, Dk. Green, Gold,
Beige/Brown, Grey/Black, White/Kelly, White/Red, White/Royal, White/Black.
Bill:
Shall be no less than 3" in length with no less than four (4) stitches, equidistantly placed from edge. The
underside of bill to be spruce green or other dark color. The bill liner shall be of washable material.
Crown:
Shall be composed of at least two (2) sections, and the front shall be lined with buckram fabric or equivalent for
cap shape retention. Each section is to have at least two (2) ventilation holes. Sections shall be double
stitched. Back of crown to have elastic or plastic adjuster.
Features:
5 -Panel, 3:Y4" Structured Crown.
5 -PANEL STRUCTURED TWILL CAP
As or equal to Virginia T's, Style # 565.
Material:
Blended twill.
Colors:
Black, Forest Green, Khaki, Navy, Red, Royal Blue, White.
Closure:
Self fabric backstrap with Velcro closure.
IFB 199163 Uniforms, Citywide 19
6 PANEL FLEXFIT PRO -STYLE WOOL CAP
As or equal to Sonnetfe Inc., Style # 6677
Material:
83% Acrylic, 15% Wool, 2% Spandex
Color:
Black, Navy, Natural, Spruce, Royal, Red, Maroon, Dark Navy.
Features:
• 6 -panel, fitted cap
• 3 %" crown
• 6 sewn eyelets
• 8 rows of stitching on visor, with silver under -visor
• Fused hard buckram sewn into front of crown
• Flat visor
Size:
6 7/8" to 7 3/8"
GROUP 9: DRESS ANCILLARY ITEMS
GARRISON BELT
As or equal to Mixson Leathercraft, Style #351
Material:
Top grain cowhide, 1-5/8" wide.
Closure:
6 or 7, nickel -plated snap closure
Color:
Black (minimally) and all colors shown in supplied catalogue.
Sizes:
Standard and Oversize waist sizes (for both men and women) 28 through 56 or greater.
MEN'S 3" CLIP -ON TIE WITH BUTTONHOLES
As or equal to Samuel Broome, Style #90010
Fabric:
100% Polyester — tropical weave
Features: Color: Dark Navy.
Pre -tied Clip -on tie
Black metal clip
3 Buttonholes attach tie to shirt
18" long
IFB 199163 Uniforms, Citywide 20
WOMEN'S CROSSOVER TIE WITH COVERED SNAP
As or equal to Samuel Broome, Style 990156 (Women's)
Fabric:
100% Polyester —tropical weave
Features:
Adjustable up to 23" long
Color:
Dark Navy
GROUP 10: SHOES
MEN'S BOAT SHOES
As or equal to Sperry Top -Sider Shoes, Style # 0843623
Features:
• Low Water Absorption Materials are Quick Drying
• Dual -Density Compression Molded EVA Midsole Offers Shock Absorption & Stability
• AEGI STM Microbe Shield Protects Against Bacteria that Cause Odor
• Removable Full -Length Molded Footbed Offers All Day, Underfoot Comfort
• HRC® Forefoot Cushioning Through EVA Compound Provides Additional Cushioning
• GRID® Patented Technology Provides Superior Cushioning &Stability
• Arch Lock Offers Increased Stability and Arch Support
• New Hydro-GripTm Rubber Traction Compound is the Ultimate Performance Traction Outsole
Compound
• Non -marking Rubber Outsole with Quadro-Grip Wave-SipingTM for Ultimate Dry / Wet Traction
Colors:
White/Navy
Black
Sizes:
7 to 13
IFB 199163 Uniforms, Citywide 21
GROUP 11: SILK-SCREENING, EMBROIDERY AND PATCHES
CITY OF MIAMI LOGO EMBROIDERED PATCH
General:
Shall be round, 4" diameter, with 1/8" wide edge, narrow stitching. Background material will be 65% polyester,
35% cotton twill warp faced. All threads to be colorfast, preshrunk, with proper strength and tension and
will withstand repeated machine washing without color fading. If patches or embroidery fades after
only 90 days use, the awarded vendor with replace and install a new patch at no additional charge to
the City.
Center Design:
City Seal: Replica of City Seal. In center, bearing detailed palm tree and words "incorporated" and below
1896" perpendicular to and across trunk. To have white inner circle stitch, white background.
Lettering:
Shall be 3/8" to 3/4" swiss or shiffli, depending on wording length. To read "THE CITY OF MIAMI" around the
top center circle. Bottom semi -circle to be blank, or shall read "Florida", Department name, or Division Name,
as specified at the time of order, as those listed below. The City reserves the right to require patches for
additional departments/division throughout the contract term.
Attachment:
All patches will be furnished complete and attached to garments at the placement point indicated at time of
order, generally left sleeve below shoulder or left front above pocket.
Code Enforcement Department Embroidered Patch:
Blue lettering and gold background (like police) to read "The City of Miami" around the top center circle.
Bottom semi -circle to be blank, or shall read "Florida", Department name, or Division Name, as specified at the
time of order. Directly attached to the bottom of the patch should read "Inspector" or "Supervisor".
Department/Division (Names for Patches) (Subject to Change of Title)
Department Division/Position Title
General Services Administration
Solid Waste
NET
Parks & Recreation
Public Facilities
Graphic Reproduction
Fleet Management
Property Maintenance
Miami Riverside Center
Operations
Recreation
Dinner Key Manuel Artime Community Center
Miamarina at Bayside
Marine Stadium Marina
IFB 199163 Uniforms, Citywide 22
Department/Division (Names for Patches) (Subject to Change of Title) Continued...
Department
Public Works
Code Enforcement
NAME PATCH
Division/Position Title
Operations
Inspector
Supervisor
Shall be embroidered patch, approximately 3-1/2" wide x 1-1/2" high (maximum) for employee name and/or
position title (one or two lines). Shall be two color (background and contrasting stitching) with edge stitching.
All established colors, lettering styles, and number of spaces available. Complete with installation.
BACK LETTERING
To be specified at time of order. Shall be silk-screened using approximately 2" to 2-1/2" block letters,
uniformed, and fade resistant, centered on upper back. To read "City of Miami" in an arch or semi -circle
(approx. 13" long), top of arch approximately 4-1/4" below collar seam. Single line below (centered and
straight horizontal) to read department, division and/or position title, approx. 12" long.
EMBROIDERY
To be standard computerized stitching, simple script or block lettering and/or design. Department name,
individual employee name and/or position title to be embroidered directly onto the garment in space
approximately 5" wide x 1-1/2" high (maximum) in one or two lines. Placement generally, above the
breast pocket, wording and stitch color to be specified at time of order.
EMBROIDERED EMBLEM
City of Miami or Department logo to be embroidered directly onto garment.
City logo shall be approximately 2" square or circle consisting 1-1/2" city logo (white with gold trim) and
one or two lines (semi -circles) or lettering (white). Lettering approximately 1/4" high.
SILK-SCREENING
(All lettering to be simple styles. Placement generally, shirt front above pocket)
1. One to two color City Logo or Department Logo - 1" to 3" diameter
2. One to two color line print, '/4 " , 34 °, 1 3/4 " 2°, and 3°.
IFB 199163 Uniforms, Citywide 23