HomeMy WebLinkAboutInvitation for Bid0'r Cityof Miami
INCORP ORATED * Invitation for Bid (IFB)
CQ FLO Purchasing Department
e
Glenn Marcos, CPPB, Director/Chief Procurement Officer
IFB Number:
Title:
Issue Date/Time:
IFB Closing Date/Time:
Pre -Bid Conference:
Pre -Bid Date/Time:
Pre -Bid Location:
Deadline for Request for Clarification:
Buyer:
Hard Copy Submittal Location:
Buyer E -Mail Address:
Buyer Facsimile:
Miami Riverside Center
444 SW 2nd Avenue, 6th Floor
Miami, Florida 33130
Web Site Address: http://ci.miami.fl.us/procurement
107067,4
Invitation For Bid For Additional Work
and Latex Gloves - Citywide
26 -JAN -2009
03 -FEB -2009 @ 13:00:00
Monday, December 29, 2008 at 3:00 PM
Byrnes, Terry
City of Miami - City Clerk
3500 Pan American Drive
Miami FL 33133 US
tbyrnes@ci.miami.fl.us
(305) 400-5230
Page 1 of 90
Certification Statement
Please quote on this form, if applicable, net prices for the item(s) listed. Return signed original and
retain a copy for your files. Prices should include all costs, including transportation to destination. The
City reserves the right to accept or reject all or any part of this submission. Prices should be firm for a
minimum of 120 days following the time set for closing of the submissions.
In the event of errors in extension of totals, the unit prices shall govern in determining the quoted
prices.
We (1) certify that we have read your solicitation, completed the necessary documents, and propose to
furnish and deliver, F.O.B. DESTINATION, the items or services specified herein.
The undersigned hereby certifies that neither the contractual parry nor any of its principal owners or
personnel have been convicted of any of the violations, or debarred or suspended as set in section
18-107 or Ordinance No. 12271.
All exceptions to this submission have been documented in the section below (refer to paragraph and
section).
EXCEPTIONS:
We (I) certify that any and all information contained in this submission is true; and we (I) further certify
that this submission is made without prior understanding, agreement, or connection with any
corporation, firm, or person submitting a submission for the same materials, supplies, equipment, or
service, and is in all respects fair and without collusion or fraud. We (I) agree to abide by all terms and
conditions of this solicitation and certify that I am authorized to sign this submission for the submitter.
Please print the following and sign your name:
SUPPLIER NAME:
PHONE: FAX:
EMAIL: BEEPER:
[.`x[21_"]7: A
TITLE:
DATE:
FAILURE TO COMPLETE, SIGN, AND RETURN THIS FORM SHALL DISQUALIFY THIS BID.
Page 2 of 90
Certifications
Legal Name of Firm:
Entity Type: Partnership, Sole Proprietorship, Corporation, etc.
Address, City, State, Zip:
Office Location: City of Miami, Miami -Dade County, or Other
Occupational License Number:
Occupational License Issuing Agency:
Occupational License Expiration Date:
Respondent certifies that (s) he has read and understood the provisions of City of Miami Ordinance No.
10032 (Section 18-105 of the City Code) pertaining to the implementation of a "First Source Hiring
Agreement.": (Yes or No)
Do you expect to create new positions in your company in the event your company was awarded a
Contract by the City? (Yes or No)
In the event your answer to question above is yes, how many new positions would you create to
perform this work?
Please list the title, rate of pay, summary of duties, number of positions, and expected length or duration
of all new positions which might be created as a result of this award of a Contract.
Minority/Women Business Affairs Registration Status: Hispanic, Female, Black or None,
Page 3 of 90
Will Subcontractor(s) be used? (Yes or No)
Does the City of Miami Living Wage Ordinance apply to this formal solicitation? ( See Section 1.40 of
the General Terms and Condtions) (Yes or No)
Service Total Contract Amount( which includes base term and renewal options):
Is this service contract a citywide contract? (Yes or No)
If the above answer is no, please indicate the name of the city (end user) department that your contract
will serve:
Provide brief description of the project or service to be provided
I/We hereby state compliance with the City of Miami Living Wage Ordinance, Section 18-556 through
Section 18-559 as summarized in Section 1.40 of the General Terms and Condtions? (Yes or No)
Reference #1- Company Name
Reference 41- Address
Reference #1- City, State, Zip
Reference #1- Dates of Contract
Reference #1- Contact Name
Reference #1- Contact Phone
Page 4 of 90
Reference #2- Company Name
Reference #2- Address
Reference #2- City, State, Zip
Reference #2- Dates of Contract
Reference 92- Contact Name
Reference #2- Contact Phone
Reference #3- Company Name
Reference #3- Address
Reference #3- City, State, Zip
Reference #3- Dates of Contract
Reference #3- Contact Name
Reference #3- Contact Phone
Page 5 of 90
Line: 1
Description: Boss Stallion #1BL9565, (No Substitution), Rubberized safety cuff, wing thumb, pull
knuckle strap, elastic, gunn pattern, top quality pearl side splits, palm lined, full leather index
finger, leather finger tips, Small
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 100 Total: $
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 3
Description: Digit -Safety Halo-Kete High Risk Latex Gloves, 100% powder -free, disposable glove,
14.5 mil palm thickness, 16.5 mil finger thickness, 50 gloves per dispenser box, 10 boxes per case.
Small, (NO SUBSTITUTION)
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 500 Total: $
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 4
Description: Linemen's Low Voltage Gloves Class "O" - 14". Proof -tested at 5000 volts AC for a
working voltage of 1000 volts AC in accordance with ASTM specifications or approved equal,
Color - Black, Size 8
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 50 Total: $
Page 6 of 90
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 5
Description: Linemen's High Voltage Gloves, Class "1"- 16", Proof -tested at 10000 volts AC for a
working voltage of 7500 volts AC in accordance with ASTM specifications. Size 8
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 10 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 6
Description: Linemen's High Voltage Gloves Class "2" - 16", Proof -tested at 20000 volts AC for a
working voltage of 17000 volts AC in accordance with ASTM specifications, Size 8
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 10 Total: $
Manufacturer
Model Number
Page 7 of 90
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 7
Description: Linemen's High Voltage Gloves Class "3" - 16". Proof -tested at 30000 volts AC for a
working voltage of 26500 volts AC in accordance with ASTM specifications, Size 8
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 10 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(C ase/B ox/Dozen/Pair)
Line: 8
Description: BarrierMax Latex by Digitcare, 12 mil, 12" length, double polymer coated, full
textured, ambidextrous, non-sterile, single use, power free, Size -Small (No Substitutions), 50
Gloves Per Box, 10 Boxes Per Case
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 500 Total: $
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(CaseB ox/Dozea/P air)
Page 8 of 90
Line: 9
Description: Nitrile gloves, Front Line by Digicare, 6 mil, 12" long, full textured, ambidextrous,
non-sterile, single use, powder free, Size -Small (No Substitutions) 100 Gloves Per Box, 10 Boxes
Per Case
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 1,000 Total: $
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 10
Description: Memphis #1350, or approved equal rubberized safety cuff work gloves. 2 ''/2"
rubberized safety cuff, full feature gunn pattern, Size-SmaII
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 12 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
Case/Box/Dozen/Pair)
Line: 11
Description: Memphis #1350, or approved equal rubberized safety cuff work gloves. 2 'h"
rubberized safety cuff, full feature gunn pattern, Size -Medium
Page 9 of 90
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 12 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 12
Description: Memphis #1350, or approved equal rubberized safety cuff work gloves. 2'h"
rubberized safety cuff, full feature gunn pattern, Size -Large
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 12 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 13
Description: Memphis #1350, or approved equal rubberized safety cuff work gloves. 2 %"
rubberized safety cuff, full feature gunn pattern, Size-XL,arge
Category: 20031-41
Unit of Measure: Box
Page 10 of 90
Unit Price: $ Number of Units: 12 Total: S
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 14
Description: BarrierMax Latex by Digitcare, 12 mil, 12" length, double polymer coated, full
textured, ambidextrous, non-sterile, single use, power free, Size -Large, (No Substitutions), 50
Gloves Per Box, 10 Boxes Per Case
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 500 Total: $
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 15
Description: BarrierMax Latex by Digitcare, 12 mil, 12" length, double polymer coated, full
textured, ambidextrous, non-sterile, single use, power free, Size -Medium, (No Substitutions), 50
Gloves Per Box, 10 Boxes Per Case
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 500 Total: S
Supplier Part Number
Standard Manufacturers
Warranty Period
Page 11 of 90
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 16
Description: BarrierMax Latex by Digitcare, 12 mil, 12" length, double polymer coated, full
textured, ambidextrous, non-sterile, single use, power free, Size-XLarge, (No Substitutions), 50
Gloves Per Box, 10 Boxes Per Case
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 500 Total: $
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 17
Description: BarrierMax Latex by Digitcare, 12 mil, 12" length, double polymer coated, full
textured, ambidextrous, non-sterile, single use, power free, Size-XXLarge, (No Substitutions), 50
Gloves Per Box, 10 Boxes Per Case
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 500 Total: S
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 18
Description: BarrierMax Latex by Digitcare, 12 mil, 12" length, double polymer coated, full
textured, ambidextrous, non-sterile, single use, power free, Size-3XLarge, (No Substitutions), 50
Gloves Per Box, 10 Boxes Per Case
Page 12 of 90
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 500 Total: $
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 19
Description: Nitrile gloves, Front Line by Digicare, 6 mil, 12" long, full textured, ambidextrous,
non-sterile, single use, powder free, Size -Medium, (No Substitutions) 100 Gloves Per Box, 10
Boxes Per Case
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 1,000 Total: $
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 20
Description: Nitrile gloves, Front Line by Digicare, 6 mil, 12" long, full textured, ambidextrous,
non-sterile, single use, powder free, Size -Large, (No Substitutions) 100 Gloves Per Box, 10 Boxes
Per Case
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 1,000 Total: $
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
Page 13 of 90
(Case/Box/Dozen/Pair)
Line: 21
Description: Nitrile gloves, Front Line by Digicare, 6 mil, 12" long, full textured, ambidextrous,
non-sterile, single use, powder free, Size-XLarge, (No Substitutions) 100 Gloves Per Box, 10 Boxes
Per Case
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 1,000 Total: $
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Linc: 22
Description: Nitrile gloves, Front Line by Digicare, 6 mil, 12" long, full textured, ambidextrous,
non-sterile, single use, powder free, Size-XLarge, (No Substitutions) 100 Gloves Per Box, 10 Boxes
Per Case
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 1,000 Total: $
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Boy,/Dozen/Pair)
Line: 23
Description: Nitrile gloves, Front Line by Digicare, 6 mil, 12" long, full textured, ambidextrous,
non-sterile, single use, powder free, Size-XXLarge, (No Substitutions) 100 Gloves Per Box, 9
Boxes Per Case
Page 14 of 90
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 900 Total: S
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 24
Description: Nitrile gloves, Front Line by Digicare, 6 mil, 12" long, full textured, ambidextrous,
non-sterile, single use, powder free, Size-3XLarge, (No Substitutions) 100 Gloves Per Box, 9 Boxes
Per Case
Category: 20031-41
Unit of Measure: Case
Unit Price: S Number of Units: 900 Total: S
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 25
Description: Driver's Gloves, Memphis #3400, or approved equal, Slip -On Cuff, Unlines, shirred
elastic back quality pigskin, Size -Small
Category: 20031-41
Unit of Measure: Box
Unit Price: S Number of Units: 12 Total: $
Manufacturer
Model Number
Supplier Part Number
Page 15 of 90
Standard manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 26
Description: Driver's Gloves, Memphis 43400, or approved equal, Slip -On Cuff, Unlines, shirred
elastic back quality pigskin, Size -Medium
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 12 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 27
Description: Driver's Gloves, Memphis #3400, or approved equal, Slip -On Cuff, Unlines, shirred
elastic back quality pigskin, Size -Large
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 12 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warrantv Period
Standard Packaging
(Case/Box/Dozen/Pair)
Page 16 of 90
Line: 28
Description: Driver's Gloves, Memphis #3400, or approved equal, Slip -On Cuff, Unlines, shirred
elastic back quality pigskin, Size-XLarge
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 12 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 29
Description: Driver's Gloves, Westchester #990, or approved equal Gunn Cuff. Slip -On style,
unlined, shirred elastic back, top grain cowhide leather, XSmall
Category: 20031-41
Unit of Measure: Box
Unit Price: S Number of Units: 12 Total: S
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 30
Page 17 of 90
Description: Driver's Gloves, Westchester #990, or approved equal Gunn Cuff. Slip -On style,
unlined, shirred elastic back, top grain cowhide leather, Size -Small
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 12 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 31
Description: Driver's Gloves, Westchester #990, or approved equal Gunn Cuff. Slip -On style,
unlined, shirred elastic back, top grain cowhide leather, Size -Medium
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 12 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 32
Description: Driver's Gloves, Westchester #990, or approved equal Gunn Cuff. Slip -On style,
unlined, shirred elastic back, top grain cowhide leather, Size -Large
Page 18 of 90
Category: 20031-41
Unit of Measure: Box
Unit Price: S Number of Units: 12 Total: S
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 33
Description: Driver's Gloves, Westchester #990, or approved equal Gunn Cuff. Slip -On style,
unlined, shirred elastic back, top grain cowhide leather, Size-XLarge
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 12 Total: S
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 34
Description: Driver's Gloves, Memphis #3110, or approved equal Slip -On Cuff. Keystone
thumb, unlined, shirred elastic back, split leather, Size -Small
Category: 20031-41
Unit of Measure: Box
Page 19 of 90
Unit Price: $ Number of Units: 12 Total:
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 35
Description: Driver's Gloves, Memphis #3110, or approved equal Slip -On Cuff. Keystone
thumb, unlined, shirred elastic back, split leather, Size -Medium
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 12 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/B ox/D ozen/Pair)
Line: 36
Description: Driver's Gloves, Memphis #3110, or approved equal Slip -On Cuff. Keystone
thumb, unlined, shirred elastic back, split leather, Size -Large
Category: 20031-41
Unit of Measure: Box
Unit Price: $
Manufacturer
Number of Units: 12 Total: $
Page 20 of 90
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 37
Description: Driver's Gloves, Memphis #3110, or approved equal Slip -On Cuff. Keystone
thumb, unlined, shirred elastic back, split leather, Size-XLarge
Category: 20031-41
Unit of Measure: Box
Unit Price: S Number of Units: 12 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 38
Description: Memphis 91900, or approved equal, leather gloves 2'/2" rubberized safety cuff, full
feature gunn, sewn with super strong kevlar thumb, premium side split leather. Size -Small
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 12 Total: $
Manufacturer
Model Number
Supplier Part Number
Page 21 of 90
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 39
Description: Memphis #1900, or approved equal, leather gloves 2 'h" rubberized safety cuff, full
feature gunn, sewn with super strong kevlar thumb, premium side split leather. Size -Medium
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 12 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 40
Description: Memphis #1900, or approved equal, leather gloves 2'/z" rubberized safety cuff, full
feature gunn, sewn with super strong kevlar thumb, premium side split leather. Size -Large
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 12 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Page 22 of 90
Line: 41
Description: Memphis #1900, or approved equal, leather gloves 2'/z" rubberized safety cuff, full
feature gunn, sewn with super strong kevlar thumb, premium side split leather. Size-XLarge
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 12 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 42
Description: Memphis #6512SJ, or approved equal, Black PVC Gloves. Double dipped, jersey
lined, fully coated, textures finish, 12" gaunlet, L Only
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 12 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 43
Page 23 of 90
Description: Nitrile disposable gloves, Best #6005, or approved equal 4 Mil thickness, 9 %2" length
and is ambidextrous. Excellent puncture and abrasion resistance. Rolled cuff, Powder Free,
Size -Large
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 2,000 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 44
Description: Nitrile disposable gloves, Best #6005, or approved equal 4 Mil thickness, 9 '/z" length
and is ambidextrous. Excellent puncture and abrasion resistance. Rolled cuff, Powder Free,
Size-XLarge
Category: 20031-41
Unit of Measure: Case
Unit Price: $_ _ Number of Units: 2,000 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 45
Description: Mens Cotton Gloves, Memphis 98300C, or approved equal. 12 oz. Cotton canvas,
Page 24 of 90
clute pattern, straight thumb. Men's Large
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 12 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 46
Description: Neoprene Gloves, Memphis #5410SE or approved equal. 20 ml thickness,12" length,
heavy duty non -slip grip, flocked lined,straight cuff, Size 7.0-7.5
tn
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 144 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(CaseBox/Dozen/P air)
Line: 47
Description: Memphis #1311, or approved equal, Men's Double Leather Palm Gloves, Large Only
Category: 20031-41
Unit of Measure: Box
Page 25 of 90
Unit Price: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Number of Units: 12 Total: $
Line: 48
Description: Memphis #5060, or approved equal, Disposable Latex Gloves. 5 Mil, Powdered,
Small to XL
Category: 20031-41
Unit of Measure: Box
Unit Price: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Number of Units: 100 Total: $
Line: 49
Description: Memphis 5060 or "approved equal" Disposable Latex Gloves, 5 mil, Non -Powdered,
Size -Medium
Category: 20031-41
Unit of Measure: Box
Unit Price: $
Manufacturer
Number of Units: 100 Total: $
Page 26 of 90
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 50
Description: Memphis 5060 or "approved equal" Disposable Latex Gloves, 5 mil, Non -Powdered,
Size -Large
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 100 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 51
Description: Memphis 5060 or "approved equal" Disposable Latex Gloves, 5 mil, Non -Powdered,
Size-XLarge
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 100 Total: $
Manufacturer
Model Number
Supplier Part Number
Page 27 of 90
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 52
Description: Missouri Mule/Wells Lamont Leather PalmGloves, Y3204, or approved equal.
Heavyweight side split leather wing thumb, fully wrapped index finger, fingertips, knuckle strip
and pull. Cotton back. Size -Medium
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 50 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 53
Description. Missouri Mule/Wells Lamont Leather PalmGloves, Y3204, or approved equal.
Heavyweight side split leather wing thumb, fully wrapped index finger, fingertips, knuckle strip
and pull. Cotton back. Size -Large
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 50 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Page 28 of 90
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 54
Description: Missouri Mule/Wells Lamont Leather Palm Gloves, Y3204, or approved equal.
Heavyweight side split leather wing thumb, fully wrapped index finger, fingertips, knuckle strip
and pull. Cotton back. Size-XLarge
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 50 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Boy,/Dozen/Pair)
Line: 55
Description: Best Hustler Gloves 725R-10, or approved equal, PVC plastic gloves, Red or black,
Chemical resistant, Size -Medium
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 10 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Page 29 of 90
Line: 56
Description: Best Hustler Gloves 72511-10, or approved equal, PVC plastic gloves, Red or black,
Chemical resistant, Size -Large
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 10 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(C ase/Box/Dozen/Pair)
Line: 57
Description: Best Hustler Gloves 725R-10, or approved equal, PVC plastic gloves, Red or black,
Chemical resistant, Size-XLarge
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 10 Total: $
Manufacturer
Model Number
Supplier Part Number
Delivery Time from Receipt of
Order (Calendar Days)
Standard Packaging
(Case/BOx/DOZen/Pair)
Line: 58
Page 30 of 90
Description: Memphis #1040 (Mens), #1042 (Ladies), or approved equal,Utility Gloves. Leather
Palm, knit wrist,seamed back, elute cut pattern, straight thumb, Size -Small
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 12 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(C a s c /B o x/D o z e n/P a ir)
Line: 59
Description: Memphis #1040 (Mens), #1042 (Ladies), or approved equal,Utility Gloves. Leather
Palm, knit wrist,seamed back, elute cut pattern, straight thumb. Size -Medium
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 12 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 60
Description: Memphis #1040 (Mens), #1042 (Ladies), or approved equal,Utility Gloves. Leather
Palm, knit wrist,seamed back, elute cut pattern, straight thumb.Size-Large
Page 31 of 90
Category: 20031-41
Unit of Measure: Box
Unit Price: S Number of Units: 12 Total: S
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(C ase/Box/Dozen/Pair)
Line: 61
Description: Memphis #1040 (Mens), #1042 (Ladies), or approved equal,Utility Gloves. Leather
Palm, knit wrist,seamed back, elute cut pattern, straight thumb.Size-XLarge
Category: 20031-41
Unit of Measure: Box
Unit Price: S Number of Units: 12 Total: S
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 62
Description: Memphis #1715, or approved equal, Heavy Duty Work Gloves. 2 3/4" safety cuff, full
gunn pattern, double leather palm, 8.5 ounce cotton back, absorbent, 8 ounce fleece fining, sewn
with super strong heat resistant Dupont Kevlar thread, Size -Small
Category: 20031-41
Unit of Measure: Box
Page 32 of 90
Unit Price: $ Number of Units: 12 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 63
Description: Memphis 41715, or approved equal, Heavy Duty Work Gloves. 23/4" safety cuff, full
gunn pattern, double leather palm, 8.5 ounce cotton back, absorbent, 8 ounce fleece lining, sewn
with super strong heat resistant Dupont Kevlar thread, Size -Medium
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 12 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 64
Description: Memphis #1715, or approved equal, Heavy Duty Work Gloves. 2 3/4" safety cuff, full
gunn pattern, double leather palm, 8.5 ounce cotton back, absorbent, 8 ounce fleece lining, sewn
with super strong heat resistant Dupont Kevlar thread, Size -Large
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 12 Total: $
Page 33 of 90
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 65
Description: Memphis #1715, or approved equal, Heavy Duty Work Gloves. 2'/4" safety cuff, full
gunn pattern, double leather palm, 8.5 ounce cotton back, absorbent, 8 ounce fleece lining, sewn
with super strong heat resistant Dupont Kevlar thread, Size-XLarge
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 12 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 66
Description: Memphis #4600, or approved equal, Blue Beast Premium Quality Welders Gloves.
Reinforced thumb and palm, sleeve lined with flame -resistant material, lock -stitched construction
with Dupont Kevlar thread. Self -hemmed leather cuff, premium extra heavy weight tanned
leather, fully welded to reinforce all critical wear area, fully enclosed sock lining made from soft
Jersey fleece material. Size -Large
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 12 Total: $
Page 34 of 90
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 67
Description: Memphis #4600, or approved equal, Blue Beast Premium Quality Welders Gloves.
Reinforced thumb and palm, sleeve lined with flame -resistant material, lock -stitched construction
with Dupont Kevlar thread. Self -hemmed leather cuff, premium extra heavy weight tanned
leather, fully welded to reinforce aII critical wear area, fully enclosed sock lining made from soft
Jersey fleece material. Size-XLarge
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 12 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 68
Description: Baxter Triflex Latex Powdered Sterile Surgical Gloves, or approved equal, superior
tear resistance, Size 7
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 40 Total: $
Manufacturer
Page 35 of 90
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 69
Description: Baxter Triflex Latex Powdered Sterile Surgical Gloves, or "approved equal", superior
tear resistance, Size 8
Category: 20031-41
Unit of Measure: Box
Unit Price: S Number of Units: 40 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/P air)
Line: 70
Description: Baxter Triflex Latex Powdered Sterile Surgical Gloves, or "approved equal',
superior tear resistance, Size 9
Category: 20031-41
Unit of Measure: Box
Unit Price: S Number of Units: 40 Total: $
Manufacturer
Model Number
Supplier Part Number
Page 36 of 90
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 71
Description: Baxter Triflex Latex Powdered Sterile Surgical Gloves, or approved equal, superior
tear resistance, Size 10
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 40 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 72
Description: Bio -Flex Bio -Hazard EMS Gloves, or approved equal High Risk Latex Examination
Gloves Ambidextrous, powder free, polymer gel coated, fully textured, tensile strength (within 12
months) 21 Mpa or more, elongation strength (within 12 months) 700%, Thickness:
cuff -minimum .16MM+/- .04MM, Palm -minimum .26MM +/- .04MM, Fingertip -minimum
.29MM +/- .04MM,Pinhole Test (.AQL): 1.0% UL approved to meet NFPA 1999 standard on
protective clothing for emergency medical operations, nonsterile. 50 per dispenser box, 10 boxes
per case, Small
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 500 Total: $
Manufacturer
Model Number
Supplier Part Number
Page 37 of 90
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 73
Description: Bio -Flex Bio -Hazard EMS Gloves, or approved equal High Risk Latex Examination
Gloves Ambidextrous, powder free, polymer gel coated, fully textured, tensile strength (within 12
months) 21 Mpa or more, elongation strength (within 12 months) 700%, Thickness:
cuff -minimum .16MM+/- .04MM, Palm -minimum .26MM +/- .04MM, Fingertip -minimum
.29MM +/- .04MM,Pinhole Test (AQL): 1.0% UL approved to meet NFPA 1999 standard on
protective clothing for emergency medical operations, nonsterile. 50 per dispenser box, 10 boxes
per case, Size -Medium
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 500 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 74
Description: Bio -Flex Bio -Hazard EMS Gloves, or approved equal High Risk Latex Examination
Gloves Ambidextrous, powder free, polymer get coated, fully textured, tensile strength (within 12
months) 21 Mpa or more, elongation strength (within 12 months) 700%, Thickness:
cuff -minimum .16MM+/- .04MM, Palm -minimum .26MM +/- .04MM, Fingertip -minimum
.29MM +/- .04MM,Pinhole Test (_AQL): 1.0% UL approved to meet NFPA 1999 standard on
protective clothing for emergency medical operations, nonsterile. 50 per dispenser box, 10 boxes
per case, Size -Large
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 500 Total: $
Manufacturer
Page 38 of 90
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 75
Description: Bio -Flex Bio -Hazard EMS Gloves, or approved equal High Risk Latex Examination
Gloves Ambidextrous, powder free, polymer gel coated, fully textured, tensile strength (within 12
months) 21 Mpa or more, elongation strength (within 12 months) 700%, Thickness:
cuff -minimum .16MM+/- .04MM, Palm -minimum .26MM +/- .04MM, Fingertip -minimum
.29MM +/- .04MM,Pinhole Test (AQL): 1.0% UL approved to meet NFPA 1999 standard on
protective clothing for emergency medical operations, nonsterile. 50 per dispenser box, 10 boxes
per case, Size-XLarge
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 500 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 76
Description: Bio -Flex Gel Latex Examination Gloves, or approved equal Ambidextrous, powder
free, polymer gel coated, fully textured, tensile strength 21 Mpa, Thickness: cuff -minimum
.11MM +/- .04MM, Palm -minimum .17MM +/- .04MM, Fingertip -minimum .18MM +/- .04MM,
Pinhole Test (AQL): 1.0% nonsterile, 100 per box, 10 Box/Case, Small
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 1,000 Total: $
Page 39 of 90
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 77
Description: Bio -Flex Gel Latex Examination GIoves, or approved equal Ambidextrous, powder
free, polymer gel coated, fully textured, tensile strength 21 Mpa, Thickness: cuff -minimum
.11MM +/- .04MM, Palm -minimum .17MM +/- .04MM, Fingertip -minimum .1 8MM +/- .04MM,
Pinhole Test (AQL): 1.0% nonsterile, 100 per box, 10 Box/Case, Medium
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 1,000 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 78
Description: Bio -Flex Gel Latex Examination Gloves, or approved equal Ambidextrous, powder
free, polymer gel coated, fully textured, tensile strength 21 '_Vlpa, Thickness: cuff -minimum
.11MM +/- .04MM, Palm -minimum .17MM +/- .04MM, Fingertip -minimum .18MM +/- .04MM,
Pinhole Test (AQL): 1.0% nonsterile, 100 per box, 10 Box/Case, Size -Large
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 1,000 Total: $
Page 40 of 90
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 79
Description: Bio -Flex Gel Latex Examination Gloves, or approved equal Ambidextrous, powder
free, polymer gel coated, fully textured, tensile strength 21 Mpa, Thickness: cuff -minimum
.11MM +/- .04MM, Palm -minimum .17MM +/- .04MM, Fingertip -minimum .18MM +/- .04MM,
Pinhole Test (AQL): 1.0% nonsterile, 100 per box, 10 Box/Case, Size-XLarge
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 1,000 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 80
Description: Linemen's Low Voltage Gloves Class O - 11. Proof -tested at 5000 volts AC for a
working voltage of 1000 volts AC in accordance with ASTM specifications or approved equal,
Color- Black, Size 8
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 10 Total: $
Page 41 of 90
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 81
Description: Linemen's Low Voltage Gloves Class O - 11". Proof -tested at 5000 volts AC for a
working voltage of 1000 volts AC in accordance with ASTM specifications or approved equal,
Color- Black, Size 9
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 10 Total: S
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 82
Description: Fire Dex brand Gold Elkskin Direct Grip Glove (No Substitution), model
G03CEDDL, Size Medium
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 300 Total: $
Supplier Part Number
Standard Manufacturers
Page 42 of 90
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 83
Description: Fire Dex brand Gold Elkskin Direct Grip Glove (No Substitution), model
G03CEDDL, Size -Large
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 300 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 84
Description: Fire Dex brand Gold Elkskin Direct Grip Glove (No Substitution), model
G03CEDDL, Size-XLarge
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 300 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Page 43 of 90
Line: 85
Description: Fire Dex brand Gold Elkskin Direct Grip Glove (No Substitution), model
G03CEDDL, Size-2XLarge
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 300 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 86
Description: Best 6784-10 or Approved Equal, Neoprene 14" Fully Coated Black Glove, 6
Doz/Case, Size -Large
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 72 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 87
Page 44 of 90
Description: Best 6797R-10, Neoprene 18" Fully Coated Black Glove or Approved Equal, 6
Doz/Case, Size -Large
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 72 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/BOX/Dozen/Pair)
Line: 88
Description: Shelby 5225 (No Substitutions) Fire Retardant, Heat Resistant, 3.25 to 4.0 oz. Shelby
Abrasion Resistant, Brushed Pigskin and Gold Koala Tonned Cowhide GORE RT7100 Glove
Barrier Fabric Shelby 'Black Line" Nomex® wristlet, NFPA Compliant, SEI Certified,
CE.Marked, Sizes: XXS
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 300 Total: $
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 89
Description: Shelby 5225 (No Substitutions) Fire Retardant, Heat Resistant, 3.25 to 4.0 oz. Shelby
Abrasion Resistant, Brushed Pigskin and Gold Koala Tonned Cowhide GORE RT7100 Glove
Barrier Fabric Shelby 'Black Line" Nomex® wristlet, NFPA Compliant, SEI Certified,
CE.Marked, Size -XS
Page 45 of 90
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of units: 300 Total: $
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(C ase/B ox/Dozen/P air)
Line: 90
Description: Shelby 5225 (No Substitutions) Fire Retardant, Heat Resistant, 3.25 to 4.0 oz. Shelby
Abrasion Resistant, Brushed Pigskin and Gold Koala Tonned Cowhide GORE RT7100 Glove
Barrier Fabric Shelby "Black Line" Nomex® wristlet, NFPA Compliant, SEI Certified,
CE.Marked, Size -Small
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 300 Total: $
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 91
Description: Shelby 5225 (No Substitutions) Fire Retardant, Heat Resistant, 3.25 to 4.0 oz. Shelby
Abrasion Resistant, Brushed Pigskin and Gold Koala Tonned Cowhide GORE RT7100 Glove
Barrier Fabric Shelby "Black Line" Nomex® wristlet, NFPA Compliant, SEI Certified,
CE.Marked, Size -Medium
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 300 Total: $
Supplier Part Number
Standard Manufacturers
Page 46 of 90
Warranty Period
Standard Packaging
(Case/Boy-/Dozen/Pair)
Line: 92
Description: Shelby 5225 (No Substitutions) Fire Retardant, Heat Resistant, 3.25 to 4.0 oz. Shelby
Abrasion Resistant, Brushed Pigskin and Gold Koala Tonned Cowhide GORE RT7100 Glove
Barrier Fabric Shelby "Black Line" Nomex® wristlet, NFPA Compliant, SEI Certified,
CE.Marked, Size -Large
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 300 Total: $
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 93
Description: Shelby 5225 (No Substitutions) Fire Retardant, Heat Resistant, 3.25 to 4.0 oz. Shelby
Abrasion Resistant, Brushed Pigskin and Gold Koala Tonned Cowhide GORE RT7100 Glove
Barrier Fabric Shelby "Black Line" Nomex® wristlet, NFPA Compliant, SEI Certified,
CE.Marked, Size-XLarge
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 300 Total: $
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 94
Page 47 of 90
Description: Shelby 5225 (No Substitutions) Fire Retardant, Heat Resistant, 3.25 to 4.0 oz. Shelby
Abrasion Resistant, Brushed Pigskin and Gold Koala Tonned Cowhide GORE RT7100 Glove
Barrier Fabric Shelby 'Black Line" Nomex® wristlet, NFPA Compliant, SEI Certified,
CE.Marked, Size -Jumbo
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 300 Total: $
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 95
Description: Ansell Edmont Dura -Touch Vinyl Gloves or approved equal. Seamless vinyl glove,
disposable/reusable, chemical resistant, powdered, Size -Small
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 100 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 96
Description: Ansell Edmont Dura -Touch Vinyl Gloves or approved equal. Seamless vinyl glove,
disposable/reusable, chemical resistant, powdered, Size -Large
Category: 20031-41
Page 48 of 90
Unit of Measure: Box
Unit Price: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Boy,/Dozen/Pair)
Line: 97
Number of Units: 100 Total: $
Description: Ansell Edmont Dura -Touch Vinyl Gloves or approved equal. Seamless vinyl glove,
disposable/reusable, chemical resistant, powdered, Size -Medium
Category: 20031-41
Unit of Measure: Box
Unit Price: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 98
Number of Units: 100 Total: $
Description: Ansell Edmont Dura -Touch Vinyl Gloves or approved equal. Seamless vinyl glove,
disposable/reusable, chemical resistant, powdered, Size-XLarge
Category: 20031-41
Unit of Measure: Box
Unit Price: $
Number of Units: 100 Total: $
Page 49 of 90
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 99
Description: Memphis #5410LE, Neoprene Gloves, or approved equal. 20ml thickness,12" length,
heavy duty non -slip grip, flocked lined,straight cuff, 12 Doz/Case, Size 9.0-9.5 Only
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 100 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 100
Description: Memphis 5060 or approved equal Disposable Latex Gloves, 5 mil, Non -Powdered,
Size -Small
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 100 Total: $
Manufacturer
Model Number
Page 50 of 90
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 101
Description: Memphis 5060 or "approved equal" Disposable Latex Gloves, 5 mil, Non -Powdered,
Size -Medium
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 100 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozeii/Pair)
Line: 102
Description: Memphis 5060 or approved equal Disposable Latex Gloves, 5 mil, Non -Powdered,
Size -Large
Category: 20031-41
Unit of Measure: Box
Unit Price: $ Number of Units: 100 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Page 51 of 90
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 103
Description: Memphis 5060 or approved equal Disposable Latex Gloves, 5 mil, Non -Powdered,
Size-XLarge
Category: 20031-41
Unit of Measure: Box
Unit Price: S Number of Units: 100 Total: S
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 104
Description: Microflex-Ultra One, Powderless Latex Gloves, or approved equal, to 290 MM
length, hypoallergenic ultra shield coating, beaded cuff, Size Small, Model UL315
Category: 20031-41
Unit of Measure: Case
Unit Price: S Number of Units: 500 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Page 52 of 90
Line: 105
Description: Microflex-Ultra One Powderless Latex Gloves, or approved equal to 290 MM length,
hypoallergenic ultra shield coating, beaded cuff, size XL, Mfg. Microflex, Model no. UL315
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 500 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 106
Description: Microflex-Ultra One Powderless Latex Gloves, or approved equal to 290 MM length,
hypoallergenic ultra shield coating, beaded cuff, Size Large, Mfg. Microflex, Model no. UL315
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 500 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 107
Description: Microflex-Ultra One Powderless Latex Gloves, or approved equal to 290 MM length,
Page 53 of 90
hypoallergenic ultra shield coating, beaded cuff, Size Medium, Mfg. Microflex, Model no. UL315
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 500 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 108
Description: Boss Stallion #1BL9565, (No Substitution), Rubberized safety cuff, wing thumb, pull
knuckle strap, elastic, gunn pattern, top quality pearl side splits, palm lined, full leather index
finger, leather finger tips, Size -Medium
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 100 Total: $
Supplier Part Number
Delivery Time from Receipt of
Order (Calendar Days)
Minimum Order Quantity
Line: 109
Description: Boss Stallion #1BL9565, (No Substitution), Rubberized safety cuff, wing thumb, pull
knuckle strap, elastic, Bunn pattern, top quality pearl side splits, palm lined, full leather index
finger, leather finger tips, Size -Large
Category: 20031-41
Unit of Measure: Pair
Page 54 of 90
Unit Price: S Number of Units: 100 Total: $
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/BoxJDozen/Pair)
Line: 110
Description: Boss Stallion #1BL9565, (No Substitution), Rubberized safety cuff, wing thumb, pull
knuckle strap, elastic, gunn pattern, top quality pearl side splits, palm lined, full leather index
finger, leather finger tips, Size -XL
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 100 Total: $
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: III
Description: Digit -Safety Halo-Kote High Risk Latex Gloves, 100% powder -free, disposable glove,
14.5 mil palm thickness, 16.5 mil finger thickness, 50 gloves per dispenser box, 10 boxes per case.
Size -Medium, (NO SUBSTITUTION)
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 500 Total: $
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Page 55 of 90
Line: 112
Description: Digit -Safety Halo-Kote High Risk Latex Gloves, 100% powder -free, disposable glove,
14.5 mil palm thickness, 16.5 mil finger thickness, 50 gloves per dispenser box, 10 boxes per case.
Size -Large, (NO SUBSTITUTION)
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 500 Total: $
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Cas e/Box/Dozen/Pair)
Line: 113
Description: Digit -Safety Halo-Kote High Risk Latex Gloves, 100% powder -free, disposable glove,
14.5 mil palm thickness, 16.5 mil finger thickness, 50 gloves per dispenser box, 10 boxes per case.
Size-XLarge, (NO SUBSTITUTION)
Category: 20031-41
Unit of Measure: Case
Unit Price: $ Number of Units: 500 Total: $
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 114
Description: Linemen's High Voltage Gloves, Class "1"- 16", Proof -tested at 10000 volts AC for a
working voltage of 7500 volts AC in accordance with ASTM specifications. Size 9
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 10 Total: $
Page 56 of 90
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 115
Description: Linemen's Low Voltage Gloves Class "O", 14". Proof -tested at 5000 volts AC for a
working voltage of 1000 volts AC in accordance with ASTM specifications or approved equal,
Color - Black, Size 10
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 10 Total: S
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 116
Description: Linemen's Low Voltage Gloves Class "O", 14". Proof -tested at 5000 volts AC for a
working voltage of 1000 volts AC in accordance with ASTM specifications or approved equal,
Color - Black, Size 9
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 10 Total: $
Manufacturer
Page 57 of 90
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 117
Description: Linemen's Low Voltage Gloves Class "O", 14". Proof -tested at 5000 volts AC for a
working voltage of 1000 volts AC in accordance with ASTM specifications or approved equal,
Color - Black, Size 11
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 50 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 118
Description: Linemen's High Voltage Gloves, Class "1"- 16", Proof -tested at 10000 volts AC for a
working voltage of 7500 volts AC in accordance with ASTM specifications. Size 10
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 10 Total: $
Manufacturer
Model Number
Supplier Part Number
Page 58 of 90
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 119
Description: Linemen's High Voltage Gloves, Class "1"- 16", Proof -tested at 10000 volts AC for a
working voltage of 7500 volts AC in accordance with ASTM specifications. Size 11
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 10 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Boy,/Dozen/Pair)
Line: 120
Description: Linemen's Low Voltage Gloves Class O - 11". Proof -tested at 5000 volts AC for a
working voltage of 1000 volts AC in accordance with ASTM specifications or approved equal,
Color- Black, Size 10
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 10 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
Page 59 of 90
(Case/Box/Dozen/Pair)
Line: 121
Description: Linemen's Low Voltage Gloves Class O - 11". Proof -tested at 5000 volts AC for a
working voltage of 1000 volts AC in accordance with ASTM specifications or approved equal,
Color- Black, Size 11
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 10 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 122
Description: Linemen's High Voltage Gloves Class "2" - 16", Proof -tested at 20000 volts AC for a
working voltage of 17000 volts AC in accordance with ASTM specifications or approved equal,
Sizes 9
Category: 20031-41
Unit of Measure: Pail
Unit Price: $ Number of Units: 10 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/BoXiDozeri%Pair)
Page 60 of 90
Line: 123
Description: Linemen's High Voltage Gloves Class "2" - 16", Proof -tested at 20000 volts AC for a
working voltage of 17000 volts AC in accordance with ASTM specifications or approved equal,
Size 10
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 10 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Line: 124
Description: Linemen's High Voltage Gloves Class "2" - 16", Proof -tested at 20000 volts AC for a
working voltage of 17000 volts AC in accordance with ASTM specifications or approved equal,
Size 11
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 10 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Page 61 of 90
Line: 125
Description: Linemen's High Voltage Gloves Class "3" - 16". Proof -tested at 30000 volts AC for a
working voltage of 26500 volts AC in accordance with ASTM specifications or approved equal,
Size 9
Category: 20031-41
Unit of Measure: Pair
Unit Price: S Number of Units: 10 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen%Pair)
Line: 126
Description: Linemen's High Voltage Gloves Class "3" - 16". Proof -tested at 30000 volts AC for a
working voltage of 26500 volts AC in accordance with ASTM specifications or approved equal,
Size 10
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 10 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(CaseBox/Dozcn/Pair)
Line: 127
Page 62 of 90
Description: Linemen's High Voltage Gloves Class "3" - 16". Proof -tested at 30000 volts AC for a
working voltage of 26500 volts AC in accordance with ASTM specifications or approved equal,
Size 11
Category: 20031-41
Unit of Measure: Pair
Unit Price: $ Number of Units: 10 Total: $
Manufacturer
Model Number
Supplier Part Number
Standard Manufacturers
Warranty Period
Standard Packaging
(Case/Box/Dozen/Pair)
Page 63 of 90
Invitation for Bid (IFB)|O7067,4
Table of Contents
Termsand Conditions ................................................................................................ --........ .....................
6j
l.General Conditions ...................................................
65
Ll.GENERAL TERMS ANT) CONDITIONS -------------------------.65
2.Special Conditions ----------..-------------------------------Q4
ILPURPOSE -----------------------------------------84
2.2. DEADLINE FOR RECEIPT 0FREQUEST FOR ADDITIONAL
------------------------------..
84
2.lTERM 0FCONTRACT ----------------------------------'.
84
2.4.CONDITIONS FOR RENEWAL ------------------------------.84
ZiESCALATION CLAUSE .................................................. --..............................................
84
2.6. NOF FUNDS ---------------------------..
84
27.METHOD OF AW6BU} -----------------------------------8j
2.8. BIDDER'S MINIMUM QUALIFICATIONS ------------------------85
2.9. DELIVERY -----------------------------------------�S5
2]0. FAILURE T0PERFORM ---------------------------------.
85
2]LEQUAL PRODUCT ..................... .......................................................................................
85
2]2. METHOD 0FPAYMENT ---------------------------------85
2,13. PACKING TICKET T0ACCOMPANY ITEMS DURING
DELIVERY -------------------------------------------'.
86
2J4.&DD]Tl OF ---------------'86
2]5.CONTRACT ADMINISTRATOR -----------------------------86
2.16. SAMPLES -----------------------------------------..
86
2]7.rlB'8D)S -----------------------------------------'86
2]8. LIQUIDATED DAMAGES --------------------------------.O7
2]9. NO SUBSTITUTION -----------------------------------'8T
2.2O.WARRANTY DY MANUFACTURER --------------------------.
87
22LWARRANTY, FITNESS FOR PURPOSE -------------_----------.87
222.QUALITY AND MANUFACTURE ---------------------------'.
87
2.23.PRODUCT SUBSTITUTES ............................
8J
224.BALANCE OFLINE -----------------------------------'D8
2.25. REFERENCES ------------------------------------88
226. SPECIFICATION EXCEPTIONS --------------------------''88
2.27. TERMINATION ------------------------------------.
88
2.28. ADDITIONAL TERMS AND CONDITIONS ----------------------'88
229. PRIMARY CLIENT (FIRST PRIORITY) -------------------------89
3. Specifications --------------------------------------------gO
3l OF WORK --------------------------.
90
Page 64of90
Invitation for Bid (IFB) 107067,4
Terms and Conditions
1. General Conditions
1.1. GENERAL TERMS AND CONDITIONS
Intent: The General Terms and Conditions described herein apply to the acquisition of
goods/equipment/services with an estimated aggregate cost of 525,000.00 or more.
Definition: A formal solicitation is defined as issuance of an Invitation for Bids, Request for Proposals,
Request for Qualifications, or Request for Letters of Interest pursuant to the City of
Miami Procurement Code and/or Florida Law, as amended. Formal Solicitation and Solicitation shall be
defined in the same manner herein.
I.I. ACCEPTANCE OF GOODS OR EQUIPMENT - Any good(s) or equipment delivered under this
formal solicitation, if applicable, shall remain the property of the seller until a physical inspection and
actual usage of the good is made, and thereafter is accepted as satisfactory to the City. It must comply with
the terms herein and be fully in accordance with specifications and of the highest quality. In the event the
goods/equipment supplied to the City are found to be defective or does not conform to specifications, the
City reserves the right to cancel the order upon written notice to the Contractor and return the product to the
Contractor at the Contractor's expense..
1.2. ACCEPTANCE OF OFFER - The signed or electronic submission of your solicitation response shall
be considered an offer on the part of the bidder/proposer; such offer shall be deemed accepted upon
issuance by the City of a purchase order.
1.3. ACCEPTANCE/REJECTION — The City reserves the right to accept or reject any or all responses or
parts of after opening/closing date and request re -issuance on the goods/services described in the formal
solicitation. In the event of such rejection, the Director of Purchasing shall notify all affected
bidders/proposers and make available a written explanation for the rejection. The City also reserves the
right to reject the response of any bidder/proposer who has previously failed to properly perform under the
terms and conditions of a contract, to deliver on time contracts of a similar nature, and who is not in a
position to perform the requirements defined in this formal solicitation. The City further reserves the right
to waive any irregularities or minor informalities or technicalities in any or all responses and may, at its
discretion, re -issue this formal solicitation.
1.4. ADDENDA — It is the bidder's/proposer's responsibility to ensure receipt of all Addenda. Addenda are
available at the City's website at: http://www.ci.miami.fl.us/procurement
1.5. ALTERNATE RESPONSES MAY BE CONSIDERED - The City may consider one (I) alternate
response from the same Bidder/Proposer for the same formal solicitation; provided, that the alternate
response offers a different product that meets or exceeds the formal solicitation requirements. In order for
the City to consider an alternate response, the Bidder/Proposer shall complete a separate Price Sheet form
and shall mark "Alternate Response". Alternate response shall be placed in the same response. This
provision only applies to formal solicitations for the procurement of goods, services, items, equipment,
materials, and/or supplies.
1.6. ASSIGNMENT - Contractor agrees not to subcontract, assign, transfer, convey, sublet, or otherwise
dispose of the resulting Contract, or any or all of its right, title or interest herein, without City of Miami's
prior written consent.
1.7. ATTORNEY'S FEES - In connection with any litigation, mediation and arbitration arising out of this
Contract, the prevailing party shall be entitled to recover its costs and reasonable attorney's fees through
and including appellate litigation and any post judgment proceedings.
I.S. AUDIT RIGHTS AND RECORDS RETENTION - The Successful Bidder,/Proposer agrees to
provide access at all reasonable times to the City, or to any of its duly authorized representatives, to any
books, documents, papers, and records of Contractor which are directly pertinent to this fornal solicitation,
for the purpose of audit, examination, excerpts, and transcriptions. The Successful Bidder/Proposer shall
maintain and retain any and all of the books, documents, papers and records pertinent to the Contract for
Page 65 of 90
0
Invitation for Bid (IFB) 107067,4
three (3) years after the City makes final payment and all other pending matters are closed. Contractor's
failure to or refusal to comply with this condition shall result in the immediate cancellation of this contract
by the City.
1.9. AVAILABILITY OF CONTRACT STATE-WIDE -Any Governmental, not-for-profit or
quasi -governmental entity in the State of Florida, may avail itself of this contract and purchase any and all
goods/services, specified herein from the successful bidder(s)/proposer(s) at the contract price(s)
established herein, when permissible by federal, state, and local laws, rules, and regulations.
Each Governmental, not-for-profit or quasi -governmental entity which uses this formal solicitation and
resulting bid contract or agreement will establish its own contract/agreement. place its own orders, issue its
own purchase orders, be invoiced there from and make its own payments, determine shipping terms and
issue its own exemption certificates as required by the successful bidder(s)/proposer(s).
1.10. AWARD OF CONTRACT:
A. The Formal Solicitation, Bidder's/Proposer's response, any addenda issued, and the purchase order shall
constitute the entire contract, unless modified in accordance with any ensuing contract/agreement,
amendment or addenda.
B. The award of a contract where there are Tie Bids will be decided by the Director of Purchasing or
designee in the instance that Tie Bids can't be determined by applying Florida Statute 287.087, Preference
to Businesses with Drug -Free Workplace Programs.
C. The award of this contract may be preconditioned on the subsequent submission of other documents as
specified in the Special Conditions or Technical Specifications. Bidder/Proposer shall be in default of its
contractual obligation if such documents are not submitted in a timely manner and in the form required by
the City. Where Bidder/Proposer is in default of these contractual requirements, the City, through action
taken by the Purchasing Department, will void its acceptance of the Bidder's/Proposer's Response and may
accept the Response from the next lowest responsive, responsible Bidder or Proposal most advantageous to
the City or re -solicit the City's requirements. The City, at its sole discretion, may seek monetary restitution
from Bidder/Proposer and its bid/proposal bond or guaranty, if applicable, as a result of damages or
increased costs sustained as a result of the Bidder's/Proposer's default.
D. The term of the contract shall be specified in one of three documents which shall be issued to the
successful Bidder/Proposer. These documents may either be a purchase order, notice of award and/or
contract award sheet.
E. The City reserves the right to automatically extend this contract for up to one hundred twenty (120)
calendar days beyond the stated contract term in order to provide City departments with continual service
and supplies while a new contract is being solicited, evaluated, and/or awarded. If the right is exercised,
the City shall notify the BidderTroposer, in writing, of its intent to extend the contract at the same price,
terms and conditions for a specific number of days. Additional extensions over the first one hundred
twenty (120) day extension may occur, if, the City and the Successful Bidder./Proposer are in mutual
agreement of such extensions.
F. Where the contract involves a single shipment of goods to the City, the contract tern shall conclude
upon completion of the expressed or implied warranty periods.
G. The City reserves the right to award the contract on a split -order, lump sum or individual -item basis,
or such combination as shall best serve the interests of the City unless otherwise specified.
H. A Contract/Agreement maybe awarded to the Bidder/Proposer by the City Commission based upon
the minimum qualification requirements reflected herein. As a result of a RFP, RFQ, or RFLI, the City
reserves the right to execute or not execute, as applicable, an Agreement with the Proposer, whichever is
determined to be in the City's best interests. Such agreement will be furnished by the City, will contain
certain terms as are in the City's best interests, and will be subject to approval as to legal form by the City
Attorney.
1.11. BID BOND/ BID SECURITY - A cashier's or certified check, or a Bid Bond signed by a recognized
surety company that is licensed to do business in the State of Florida, payable to the City of Miami, for the
amount bid is required from all bidders/proposers, if so indicated under the Special Conditions. This check
or bond guarantees that a bidder/proposer will accept the order or contract/agreement, as bid/proposed, if it
is awarded to bidder/proposer. Bidder/Proposer shall forfeit bid deposit to the City should City award
Page 66 of 90
Invitation for Bid (IFB) 107067,4
contract/agreement to Bidder/Proposer and Bidder/Proposer fails to accept the award. The City reserves the
right to reject any and all surety tendered to the City. Bid deposits are returned to unsuccessful
bidders/proposers within ten (10) days after the award and successful bidder's/proposer's acceptance of
award. If sixty (60) days have passed after the date of the formal solicitation closing date, and no contract
has been awarded, all bid deposits will be returned on demand.
Certified Minority/Women vendors may apply to participate in the City's Bid Bond Voucher Program by
contacting the Minority/Women Business Affairs office.
1.12. RESPONSE FORM (HARDCOPY FORMAT) - All forms should be completed, signed and
submitted accordingly.
1.13. BID SECURITY FORFEITED LIQUIDATED DAMAGES - Failure to execute an Agreement
and/or file an acceptable Performance Bond, when required, as provided herein, shall be just cause for the
annulment of the award and the forfeiture of the Bid Security to the City, which forfeiture shall be
considered, not as a penalty, but in mitigation of damages sustained. Award may then be made to the
next lowest responsive, responsible Bidder or Proposal most advantageous to the City or all responses may
be rejected.
1.14. BRAND NAMES - If and wherever in the specifications brand names, makes, models, names of any
manufacturers, trade names, or bidder/proposer catalog numbers are specified, it is for the purpose of
establishing the type, function, minimum standard of design, efficiency, grade or quality of goods only.
When the City does not wish to rule out other competitors' brands or makes, the phrase "OR EQUAL" is
added. When bidding/proposing an approved equal, Bidders/Proposers will submit, with their response,
complete sets of necessary data (factory information sheets, specifications, brochures, etc.) in order for the
City to evaluate and determine the equality of the item(s) bid/proposed. The City shall be the sole judge of
equality and its decision shall be final. Unless otherwise specified, evidence in the form of samples may be
requested if the proposed brand is other than specified by the City. Such samples are to be furnished after
formal solicitation opening/ closing only upon request of the City. If samples should be requested, such
samples must be received by the City no later than seven (7) calendar days after a formal request is made.
1.15. CANCELLATION - The City reserves the right to cancel all formal solicitations before its
opening/closing. In the event of bid/proposal cancellation, the Director of Purchasing shall notify all
prospective bidders/proposers and make available a written explanation for the cancellation.
1.16. CAPITAL EXPENDITURES - Contractor understands that any capital expenditures that the firm
makes, or prepares to make, in order to deliver/perform the goods/services required by the City, is a
business risk which the contractor must assume. The City will not be obligated to reimburse amortized or
unamortized capital expenditures, or to maintain the approved status of any contractor. If contractor has
been unable to recoup its capital expenditures during the time it is rendering such goods/services, it shall
not have any claim upon the City.
1.17. CITY NOT LIABLE FOR DELAYS - It is further expressly agreed that in no event shall the City
be liable for, or responsible to, the Bidder/Proposer/Consultant, any sub-contractor/sub-consultant, or to
any other person for, or on account of, any stoppages or delay in the work herein provided for by injunction
or other legal or equitable proceedings or on account of any delay for any cause over which the City has no
control.
1.18. COLLUSION—Bidder/Proposer, by submitting a response, certifies that its response is made without
previous understanding, agreement or connection either with any person, firm or corporation submitting a
response for the same items/services or with the City of Miami's Purchasing Department or initiating
department. The Bidder/Proposer certifies that its response is fair, without control, collusion, fraud or other
illegal action. Bidder/Proposer certifies that it is in compliance with the Conflict of Interest and Code of
Ethics Laws. The City will investigate all potential situations where collusion may have occurred and the
City reserves the right to reject any and all bids/responses where collusion may have occurred.
1.19. COMPLIANCE WITH FEDERAL, STATE AND LOCAL LAWS - Contractor understands that
contracts between private entities and local governments are subject to certain laws and regulations,
including laws pertaining to public records, conflict of interest, records keeping, etc. City and Contractor
agree to comply with and observe all applicable laws, codes and ordinances as that may in any way affect
the goods or equipment offered, including but not limited to:
A. Executive Order 11246, which prohibits discrimination against any employee, applicant, or client
Page 67 of 90
Invitation for Bid (IFB) 107067,4
because of race, creed, color, national origin, sex, or age with regard to, but not limited to, the following:
employment practices, rate of pay or other compensation methods, and training selection.
B. Occupational, Safety and Health Act (OSHA), as applicable to this Formal Solicitation.
C. The State of Florida Statutes, Section 287.133(3)(A) on Public Entity Crimes.
D. Minority/Women Business Affairs Enterprise (M/WBE) City Ordinances No. 10062, 10538, 11272, as
amended, as applicable to this Formal Solicitation.
E. Environment Protection Agency (EPA), as applicable to this Formal Solicitation.
F. Uniform Commercial Code (Florida Statutes, Chapter 672).
G. Americans with Disabilities Act of 1990, as amended.
H. National Institute of Occupational Safety Hazards (NIOSH), as applicable to this Formal Solicitation.
I. National Forest Products Association (NFPA), as applicable to this Formal Solicitation.
J. City Procurement Ordinance City Code Section 18, Article III.
K. Conflict of Interest, City Code Section 2-611;61.
L. Cone of Silence, City Code Section 18-74.
M. The Florida Statutes Sections 218.73 and 218.74 on Prompt Payment.
N. First Source Hiring Agreement, City Ordinance No. 10032, as applicable to this Formal Solicitation.
Implemented to foster the creation of new and permanent jobs for City of Miami residents; requires as a
condition precedent to the execution of service contracts including professional services.
Lack of knowledge by the bidder/proposer will in no way be a cause for relief from responsibility.
Non-compliance with all local, state, and federal directives, orders, and laws may be considered grounds
for termination of contract(s).
Copies of the City Ordinances may be obtained from the City Clerk's Office.
1.20. CONE OF SILENCE - Pursuant to Section 18-74 of the City of Miami Code, a "Cone of Silence" is
imposed upon each RFP, RFQ, RFLI, or IFB after advertisement and terminates at the time the City
Manager issues a written recommendation to the Miami City Commission. The Cone of Silence shall be
applicable only to Contracts for the provision of goods and services and public works or improvements for
amounts greater than $200,000. The Cone of Silence prohibits any communication regarding RFPs, RFQs,
RFLI or IFBs (bids) between, among others:
Potential vendors, service providers, bidders, lobbyists or consultants and the City's professional staff
including, but not limited to, the City Manager and the City Manager's staff; the Mayor, City
Commissioners, or their respective staffs and any member of the respective selection/evaluation committee.
The provision does not apply to, among other communications:
oral communications with the City purchasing staff regarding Minority/Women Business Enterprise
(M/WBE) and local vendor outreach programs; oral communications, provided the communication is
limited strictly to matters of process or procedure already contained in the formal solicitation document; the
provisions of the Cone of Silence do not apply to oral communications at duly noticed site
visits/inspections, pre -proposal or pre-bid conferences, oral presentations before selection/evaluation
conunittees, contract negotiations during any duly noticed public meeting, or public presentations made to
the Miami City Commission during a duly noticed public meeting; or communications in writing or by
email at any time with any City employee, official or member of the City Commission unless specifically
prohibited by the applicable RFP, RFQ, RFLI or IFB (bid) documents (See Section 2.2. of the Special
Conditions); or communications in connection with the collection of industry comments or the performance
of market research regarding a particular RFP, RFQ, RFLI OR IFB by City Purchasing staff.
Proposers or bidders must file a copy of any written communications with the Office of the City Clerk,
which shall be made available to any person upon request. The City shall respond in writing and file a copy
with the Office of the City Clerk, which shall be made available to any person upon request. Written
communications may be in the form of e-mail, with a copy to the Office of the City Clerk.
Page 68 of 90
Invitation for Bid (IFB) 107067,4
In addition to any other penalties provided by lave, violation of the Cone of Silence by any proposer or
bidder shall render any award voidable. A violation by a particular Bidder, Proposer, Offeror, Respondent,
lobbyist or consultant shall subject same to potential penalties pursuant to the City Code. Any person
having personal knowledge of a violation of these provisions shall report such violation to the State
Attorney and/or may file a complaint with the Ethics Commission. Proposers or bidders should reference
Section 18-74 of the City of Miami Code for further clarification.
This language is only a summary of the key provisions of the Cone of Silence. Please review City of
Miami Code Section 18-74 for a complete and thorough description of the Cone of Silence. You may
contact the City Clerk at 305-250-5360, to obtain a copy of same.
1.21. CONFIDENTIALITY - As a political subdivision, the City of Miami is subject to the Florida
Sunshine Act and Public Records Law. If this Contract/Agreement contains a confidentiality provision, it
shall have no application when disclosure is required by Florida law or upon court order.
1.22. CONFLICT OF INTEREST — Bidders/Proposers, by responding to this Formal Solicitation, certify
that to the best of their knowledge or belief, no elected/appointed official or employee of the City of Miami
is financially interested, directly or indirectly, in the purchase of goods/services specified in this Formal
Solicitation. Any such interests on the part of the Bidder/Proposer or its employees must be disclosed in
writing to the City. Further, you must disclose the name of any City employee who owns, directly or
indirectly, an interest of five percent (5%) or more of the total assets of capital stock in your firm.
1.23. COPYRIGHT OR PATENT RIGHTS — Bidders/Proposers warrant that there has been no violation
of copyright or patent rights in manufacturing, producing, or selling the goods shipped or ordered and/or
services provided as a result of this formal solicitation, and bidders/proposers agree to hold the City
harmless from any and all liability, loss, or expense occasioned by any such violation.
1.24. COST INCURRED BY BIDDER/PROPOSER - All expenses involved with the preparation and
submission of Responses to the City, or any work performed in connection therewith shall be bome by the
Bidders)/Propo ser(s).
1.25. DEBARMENT AND SUSPENSIONS (See 18-107)
(a) Authority and requirement to debar and suspend. After reasonable notice to an actual or prospective
Contractual Parry, and after reasonable opportunity for such party to be heard, the City Manager, after
consultation with the Chief Procurement Officer and the city attorney, shall have the authority to debar a
Contractual Party, for the causes listed below, from consideration for award of city Contracts. The
debarment shall be for a period of not fewer than three years. The City Manager shall also have the
authority to suspend a Contractual Party from consideration for award of city Contracts if there is probable
cause for debarment, pending the debarment determination. The authority to debar and suspend contractors
shall be exercised in accordance with regulations which shall be issued by the Chief Procurement Officer
after approval by the City Manager, the city attorney, and the City Commission.
(b) Causes for debarment or suspension. Causes for debarment or suspension include the following:
(1) Conviction for commission of a criminal offense incident to obtaining or attempting to obtain a
public or private Contract or subcontract, or incident to the performance of such Contract or
subcontract.
(2) Conviction under state or federal statutes of embezzlement, theft, forgery, bribery, falsification
or destruction of records, receiving stolen property, or any other offense indicating a lack of business
integrity or business honesty.
(3) Conviction under state or federal antitrust statutes arising out of the submission of Bids or
Proposals.
(4) Violation of Contract provisions, which is regarded by the Chief Procurement Officer to be
indicative of nonresponsibility. Such violation may include failure without good cause to perform in
accordance with the tenns and conditions of a Contract or to perform within the time limits provided in
a Contract, provided that failure to perform caused by acts beyond the control of a party shall not be
considered a basis for debarment or suspension.
(5) Debarment or suspension of the Contractual Party by any federal, state or other governmental
entity.
Page 69 of 90
Invitation for Bid (IFB) 107067,4
(6) False certification pursuant to paragraph (c) below.
(7) Found in violation of a zoning ordinance or any other city ordinance or regulation and for
which the violation remains noncompliant.
(8) Found in violation of a zoning ordinance or any other city ordinance or regulation and for
which a civil penalty or fine is due and owing to the city.
(9) Any other cause judged by the City Manager to be so serious and compelling as to affect the
responsibility of the Contractual Party performing city Contracts.
(c) Certification. All Contracts for goods and services, sales, and leases by the city shall contain a
certification that neither the Contractual Party nor any of its principal owners or personnel have been
convicted of any of the violations set forth above or debarred or suspended as set forth in paragraph (b)(5).
(d) Debarment and suspension decisions. Subject to the provisions of paragraph (a), the City Manager shall
render a written decision stating the reasons for the debarment or suspension. A copy of the decision shall
be provided promptly to the Contractual Party, along with a notice of said party's right to seek judicial
relief.
1.26. DEBARRED/SUSPENDED VENDORS —An entity or affiliate who has been placed on the State of
Florida debarred or suspended vendor list may not submit a response on a contract to provide goods or
services to a public entity, may not submit a response on a contract with a public entity for the construction
or repair of a public building or public work, may not submit response on leases of real property to a public
entity, may not award or perform work as a contractor, supplier, subcontractor, or consultant under contract
with any public entity, and may not transact business with any public entity.
1.27. DEFAULT/FAILURE TO PERFORM - The City shall be the sole judge of nonperformance, which
shall include any failure on the part of the successful BiddenTroposer to accept the award, to furnish
required documents, and/or to fulfill any portion of this contract within the time stipulated.
Upon default by the successful Bidder/Proposer to meet any terms of this agreement, the City will notify
the Bidder/Proposer of the default and will provide the contractor three (3) days (weekends and holidays
excluded) to remedy the default. Failure on the contractor's part to correct the default within the required
three (3) days shall result in the Contract being terminated and upon the City notifying in writing the
contractor of its intentions and the effective date of the termination. The following shall constitute default:
A. Failure to perform the work or deliver the goods/services required under the Contract and/or within the
time required or failing to use the subcontractors, entities and personnel as identified and set forth, and to
the degree specified in the Contract.
B. Failure to begin the work under this Contract within the time specified.
C. Failure to perform the work with sufficient workers and equipment or with sufficient materials to
ensure timely completion.
D. Neglecting or refusing to remove materials or perform new work where prior work has been rejected as
nonconforming with the terms of the Contract.
E. Becoming insolvent, being declared bankrupt, or committing any act of bankruptcy or insolvency, or
making an assignment for the benefit of creditors, if the insolvency, bankruptcy, or assignment renders the
successful BidderTroposer incapable of performing the work in accordance with and as required by the
Contract.
F. Failure to comply with any of the terms of the Contract in any material respect.
All costs and charges incurred by the City as a result of a default or a default incurred beyond the time
limits stated, together with the cost of completing the work, shall be deducted from any monies due or
which may become due on this Contract.
1.28. DETERMINATION OF RESPONSIVENESS - Each Response will be reviewed to determine if it
is responsive to the submission requirements outlined in the Formal Solicitation. A "responsive" response is
one which follows the requirements of the formal solicitation, includes all documentation, is submitted in
the format outlined in the formal solicitation, is of timely submission, and has appropriate signatures as
required on each document. Failure to comply with these requirements may deem a Response
Page 70 of 90
Invitation for Bid (1FB) 107067,4
non-responsive.
1.29. DISCOUNTS OFFERED DURING TERM OF CONTRACT - Discount Prices offered in the
response shall be fixed after the award by the Commission, unless otherwise specified in the Special Terns
and Conditions. Price discounts off the original prices quoted in the response will be accepted from
successful Bidder(s)/Proposer(s) during the term of the contract. Such discounts shall remain in effect for
a minimum of 120 days from approval by the City Commission Any discounts offered by a manufacturer
to Bidder/Proposer will be passed on to the City.
1.30. DISCREPANCIES, ERRORS, AND OMISSIONS - Any discrepancies, errors, or ambiguities in
the Formal Solicitation or addenda (if any) should be reported in writing to the City's Purchasing
Department. Should it be found necessary, a written addendum will be incorporated in the Formal
Solicitation and will become part of the purchase agreement (contract documents). The City will not be
responsible for any oral instructions, clarifications, or other communications.
A. Order of Precedence — Any inconsistency in this formal solicitation shall be resolved by giving
precedence to the following documents, the first of such list being the governing documents.
1) Addenda (as applicable)
2) Specifications
3) Special Conditions
4) General Terms and Conditions
1.31. EMERGENCY / DISASTER PERFORMANCE - In the event of a hurricane or other emergency
or disaster situation, the successful vendor shall provide the City with the commodities/services defined
within the scope of this formal solicitation at the price contained within vendor's response. Further,
successful vendor shall deliver/perform for the city on a priority basis during such times of emergency.
1.32. ENTIRE BID CONTRACT OR AGREEMENT - The Bid Contract or Agreement consists of this
City of Miami Formal Solicitation and specifically this General Conditions Section, Contractor's Response
and any written agreement entered into by the City of Miami and Contractor in cases involving RFPs,
RFQs, and RFLIs, and represents the entire understanding and agreement between the parties with respect
to the subject matter hereof and supersedes all other negotiations, understanding and representations, if any,
made by and between the parties. To the extent that the agreement conflicts with, modifies, alters or
changes any of the terms and conditions contained in the Formal Solicitation and/or Response, the Fon-nal
Solicitation and then the Response shall control. This Contract may be modified only by a written
agreement signed by the City of Miami and Contractor.
1.33. ESTIMATED QUANTITIES —Estimated quantities or estimated dollars are provided for your
guidance only. No guarantee is expressed or implied as to quantities that will be purchased during the
contract period. The City is not obligated to place an order for any given amount subsequent to the award
of this contract. Said estimates may be used by the City for purposes of determining the low bidder or most
advantageous proposer meeting specifications. The City reserves the right to acquire additional quantities
at the prices bid/proposed or at lower prices in this Formal Solicitation.
1.34. EVALUATION OF RESPONSES
A.Rejection of Responses
The City may reject a Response for any of the following reasons:
1) Bidder/Proposer fails to acknowledge receipt of addenda;
2) Bidder/Proposer inistates or conceals any material fact in the Response ;
3) Response does not conform to the requirements of the Formal Solicitation;
4) Response requires a conditional award that conflicts with the method of award;
5) Response does not include required samples, certificates, licenses as required; and,
6) Response was not executed by the Bidder's/Proposer(s) authorized agent.
The foregoing is not an all inclusive list of reasons for which a Response may be rejected. The City may
reject and re -advertise for all or any part of the Formal Solicitation whenever it is deemed in the best
interest of the City.
B. Elimination From Consideration
Page 71 of 90
Invitation for Bid (IFB) 107067,4
1) A contract shall not be awarded to any person or firm which is in arrears to the City upon any debt or
contract, or which is a defaulter as surety or otherwise upon any obligation to the City.
2) A contract may not be awarded to any person or firm which has failed to perform under the terns and
conditions of any previous contract with the City or deliver on time contracts of a similar nature.
3) A contract may not be awarded to any person or finn which has been debarred by the City in
accordance with the City's Debarment and Suspension Ordinance.
C. Determination of Responsibility
1) Responses will only be considered from entities who are regularly engaged in the business of providing
the goods/equipment/services required by the Formal Solicitation. Bidder/Proposer must be able to
demonstrate a satisfactory record of performance and integrity; and, have sufficient financial, material,
equipment, facility, personnel resources, and expertise to meet all contractual requirements. The terms
"equipment and organization" as used herein shall be construed to mean a fully equipped and well
established entity in line with the best industry practices in the industry as determined by the City.
2) The City may consider any evidence available regarding the financial, technical and other qualifications
and abilities of a Bidder/Proposer, including past performance (experience) with the City or any other
governmental entity in making the award.
3) The City may require the Bidder(s)/Proposer(s) to show proof that they have been designated as an
authorized representative of a manufacturer or supplier which is the actual source of supply, if required by
the Formal Solicitation.
1.35. EXCEPTIONS TO GENERAL AND/OR SPECIAL CONDITIONS OR SPECIFICATIONS -
Exceptions to the specifications shall be listed on the Response and shall reference the section. Any
exceptions to the General or Special Conditions shall be cause for the bid (IFB) to be considered
non-responsive. It also may be cause for a RFP, RFQ, or RFLI to be considered non-responsive; and, if
exceptions are taken to the terms and conditions of the resulting agreement it may lead to terminating
negotiations.
1.36. F.O.B. DESTINATION - Unless otherwise specified in the Formal Solicitation, all prices
quoted/proposed by the bidder/proposer must be F.O.B. DESTINATION, inside delivery, with all delivery
costs and charges included in the bid/proposal price, unless otherwise specified in this Formal
Solicitation. Failure to do so maybe cause for rejection of bid/proposal.
1.37. FIRM PRICES - The bidder/proposer warrants that prices, terms, and conditions quoted in its
response will be firm throughout the duration of the contract unless otherwise specified in the Formal
Solicitation. Such prices will remain firm for the period of performance or resulting purchase orders or
contracts, which are to be performed or supplied over a period of time.
1.38. FIRST -SOURCE HIRING AGREEMENT (Sec. 18-105)
(a) The Conunission approves implementation of the first -source hiring agreement policy and requires
as a condition precedent to the execution of service contracts for facilities, services, and/or receipt of grants
and loans, for projects of a nature that create new jobs, the successfiil negotiation of first -source hiring
agreements between the organization or individual receiving said contract and the authorized representative
unless such an agreement is found infeasible by the city manager and such finding approved by the City
Commission at a public hearing.
(b) For the purpose of this section, the following terms, phrases, words and their derivations shall have
the following meanings:
Authorized representative means the Private hldustry Council of South Florida/South Florida Employment
and Training Consortium, or its successor as local recipient of federal and state training and employment
funds.
Facilities means all publicly financed projects, including but without limitation, unified development
projects, municipal public works, and municipal improvements to the extent they are financed through
public money services or the use of publicly owned property.
Grants and loans means, without limitation, urban development action grants (UDAG), economic
development agency construction loans, loans from Miami Capital Development, Incorporated, and all
federal and state grants administered by the city.
Page 72 of 90
Invitation for Bid (IFB) 107067,4
Service contracts means contracts for the procurement of services by the city which include professional
services.
Services includes, without limitation, public works improvements, facilities, professional services,
commodities, supplies, materials and equipment.
(c) The authorized representative shall negotiate each first -source hiring agreement.
(d) The primary beneficiaries of the first -source hiring agreement shall be participants of the city
training and employment programs, and other residents of the city.
1.39. FLORIDA MINIMUM WAGE - The Constitution of the State of Florida, Article X, Section 24,
states that employers shall pay employee wages no less than the minimum wage for all hours worked in
Florida. Accordingly, it is the contractor's and its' subcontractor(s) responsibility to understand and
comply with this Florida constitutional minimum wage requirement and pay its employees the current
established hourly minimum wage rate, which is subject to change or adjusted by the rate of inflation using
the consumer price index for urban wage earners and clerical workers, CPI -W, or a successor index as
calculated by the United States Department of Labor. Each adjusted minimum wage rate calculated shall
be determined and published by the Agency Workforce Innovation on September 30th of each year and
take effect on the following January I st.
At the time of responding, it is bidder/proposer and his/her subcontractor(s), if applicable, full
responsibility to determine whether any of its employees may be impacted by this Florida Law at any given
point in time during the term of the contract. If impacted, bidder/proposer must furnish employee name(s),
job title(s), job description(s), and current pay rate(s). Failure to submit this information at the time of
submitting a response constitute successful bidder's/proposer's acknowledgement and understanding that
the Florida Minimum Wage Law will not impact its prices throughout the term of contract and waiver of
any contractual price increase request(s). The City reserves the right to request and successful
bidder/proposer must provide for any and all information to make a wage and contractual price increase(s)
determination.
1.40 CITY OF MIAMI LIVING WAGE ORDINANCE- The City of Miami adopted a living wage
ordinance for city service contracts awarded by the city containing a total contract value exceeding
$100,000 annually for the following services: food preparation and/or distribution; security services;
routine maintenance services such as custodial, cleaning, computers, refuse removal, repair, refinishing and
recycling; clerical or other non -supervisory office work, whether temporary or permanent; transportation
and parking services; printing and reproduction services; landscaping, lawn, and or agricultural services.
If this solicitation requires the aforementioned services, effective on April 1, 2008, contractors must pay
its' employees a living wage no less than $11-21 an hour with a health benefit plan and not less than $12.46
an hour without health benefits, which shall be adjusted annually by no later than April 1st following the
publication of the U.S Department of Ilealth and Human Services Poverty Guidelines, as published from
time to time.
A service contractor is defined as any "for profit" individual, business entity, corporation, partnership,
limited liability company, joint venture, or similar business: (1) Paid in whole or part from one or more of
the city's general funds, capital project funds, special revenue funds, or any other funds either directly or
indirectly, whether by competitive bid process, informal bids, requests for proposals, some forn of
solicitation, negotiation, or agreement, or any other decision to enter into a contract; and, (2) The service
contractor is engaged in the business of, or part of, a contract or a subcontract to provided covered services,
either directly or indirectly, for the benefit of the city. This does not aply to contracts related primarily to
the sale of products or goods.
The service contractor, prior to entering any such contract, must certify to the city that it will pay each of
its covered employees no less than the living wage. A copy of this certificate must be made available to the
public upon request. The certificate, at a minimum, must include the following:
(1) The name, address, and phone number of the employer, a contact person, and the specific project for
which the service contract is sought;
(2) The amount of the service contract and the city department the contract will serve.
(3) A brief description of the project or service provided;
(4) A statement of the wage levels for all covered employees; and
Page 73 of 90
Invitation for Bid (IFB) 107067,4
(5) A conunitment to pay all covered employees the living wage.
A copy of the living wage rate shall be kept posted by the service contractor at the site of the work in a
prominent place where it can easily be seen and read by the covered employees and shall be supplied to
such employees within a reasonable time after a request to do so. Additionally, service contractors shall
furnish a copy of the requirements of the City of Miami Living Wage Ordinance to any entity submitting a
bid for a subcontract on any service contract subject to this article. Posting requirements will not be
required where the service contractor prints the following statements on the front of the covered employee's
first paycheck and every six months thereafter. "You are required by the City of Miami Living Wage
Ordinance to be paid a Living Wage. If you do not believe you being paid at the Living Wage rate, contact
your employer, an attorney, or the City of Miami." All notices will be printed in English, Spanish and
Creole.
Service Contractors and their subcontractors agree to produce all documents and records relating to payroll
and compliance this Ordinance. Each service contractor shall maintain payroll records for all covered
employees and basic records relating thereto and shall preserve them for a period of three (3) years from
the date of termination or expiration of the service contract. The records shall contain:
(1) The name and address of each covered employee;
(2) The job title and classification;
(3) The number of hours worked each day;
(4) The gross wages earned and deductions made;
(5) Annual wages paid;
(6) A copy of the social security returns and evidence of payment thereof,
(7) A record of fringe benefit payments including contributions to approved plans; and
(8) Any other data of infonnation the city require from time to time.
Every six months, the service contractor shall file with the city's procurement director a listing of all
covered employees together with a certification of compliance with this article. Upon request from the
city, the service contractor shall produce for inspection and copying its payroll records for any or all of its
covered employees for any period covered by the service contract. The city may examine payroll records as
needed to ensure compliance.
Failure to comply with the City of Miami Living Wage Ordinance may result in legal action by the
covered employee or former covered employee as allowed by Florida Law, court impose sanctions, city
impose sanctions, such as pay wage restitution, impose monetary damages, suspension or termination of
payment, termination of contract, and debarment.
Please review City of Miami Code Section 18-556 through Section 18-559 for a complete and thorough
description of the City of Miami Living Wage.
1.41. GOVERNING LAW AND VENUE - The validity and effect of this Contract shall be governed by
the laws of the State of Florida. The parties agree that any action, mediation or arbitration arising out of this
Contract shall take place in Miami -Dade County, Florida.
1.42. HEADINGS AND TERMS - The headings to the various paragraphs of this Contract have been
inserted for convenient reference only and shall not in any manner be construed as modifying, amending or
affecting in any way the expressed terms and provisions hereof.
1.43. HEALTH INSURANCE PORTABILITY AND ACCOUNTABILITY ACT (HIPPA) - Any
person or entity that performs or assists the City of Miami with a function or activity involving the use or
disclosure of "individually identifiable health information (IIHI) and/or Protected Health Information (PHI)
shall comply with the Health Insurance Portability and Accountability Act (HIP.AA) of 1996 and the City
of Miami Privacy Standards. HIPAA mandates for privacy, security and electronic transfer standards,
which include but are not limited to:
A. Use of information only for performing services required by the contract or as required by law;
B. Use of appropriate safeguards to prevent non -permitted disclosures;
C. Reporting to the City of Miami of any non -permitted use or disclosure;
D. Assurances that any agents and subcontractors agree to the same restrictions and conditions that apply to
Page 74 of 90
Invitation for Bid (IFB) 107067,4
the Bidder/Proposer and reasonable assurances that IIHI/PHI will be held confidential;
E. Making Protected Health Information (PHI) available to the customer;
F. Making PHI available to the customer for review and amendment; and incorporating any amendments
requested by the customer;
G. Making PHI available to the City of Miami for an accounting of disclosures; and
H. Making internal practices, books and records related to PHI available to the City of Miami for
compliance audits.
PHI shall maintain its protected status regardless of the form and method of transmission (paper records,
and/or electronic transfer of data). The Bidder/ Proposer must give its customers written notice of its
privacy information practices including specifically, a description of the types of uses and disclosures that
would be made with protected health information.
1.44. INDEMNIFICATION - The Contractor shall indemnify and save harmless forever the City, and all
the City's agents, officers and employees from and against all charges or claims resulting from any bodily
injury, loss of life, or damage to property from any act, omission or neglect, by itself or its employees; the
Contractor shall become defendant in every suit brought for any of such causes of action against the City or
the City's officials, agents and employees; the Contractor shall further indemnify City as to all costs,
attorney's fees, expenses and liabilities incurred in the defense of any such claims and any resulting
investigation.
1.45. INFORMATION AND DESCRIPTIVE LITERATURE—Bidders/Proposer must furnish aII
information requested in the spaces provided in the Formal Solicitation. Further, as may be specified
elsewhere, each Bidder/Proposer must submit for evaluation, cuts, sketches, descriptive literature, technical
specifications, and Material Safety Data Sheets (MSDS)as required, covering the products offered.
Reference to literature submitted with a previous response or on file with the Buyer will not satisfy this
provision.
1.46. INSPECTIONS - The City may, at reasonable times during the term hereof, inspect Contractor's
facilities and perform such tests, as the City deems reasonably necessary, to determine whether the goods
and/or services required to be provided by the Contractor under this Contract conform to the terms and
conditions of the Formal Solicitation. Contractor shall make available to the City all reasonable facilities
and assistance to facilitate the performance of tests or inspections by City representatives. All tests and
inspections shall be subject to, and made in accordance with, the provisions of the City of Miami Ordinance
No. 12271 (Section 15-79), as same may be amended or supplemented from time to time.
1.47. INSPECTION OF RESPONSE - Responses received by the City- pursuant to a Formal Solicitation
will not be made available until such time as the City provides notice of a decision or intended decision or
within 10 days after bid closing, whichever is earlier. Bid/Proposal results will be tabulated and may be
furnished upon request via fax or e-mail to the Sr. Procurement Specialist issuing the Solicitation.
Tabulations also are available on the City's Web Site following recommendation for award.
1.48. INSURANCE - Within ten (10) days after receipt of Notice of Award, the successful Contractor,
shall furnish Evidence of Insurance to the Purchasing Department, if applicable. Submitted evidence of
coverage shall demonstrate strict compliance to all requirements listed on the Special Conditions entitled
"Insurance Requirements". The City shall be listed as an "Additional Insured."
Issuance of a Purchase Order is contingent upon the receipt of proper insurance documents. If the
insurance certificate is received within the specified time frame but not in the manner prescribed in this
Solicitation the Contractor shall be verbally notified of such deficiency and shall have an additional five (5)
calendar days to submit a corrected certificate to the City. If the Contractor fails to submit the required
insurance documents in the manner prescribed in this Solicitation within fifteen (15) calendar days after
receipt Notice of Award, the contractor shall be in default of the contractual terms and conditions and shall
not be awarded the contract. Under such circumstances, the Bidder/Proposer may be prohibited from
submitting future responses to the City. Information regarding any insurance requirements shall be directed
to the Risk Administrator, Department of Risk Management, at 444 SW 2nd Avenue, 9th Floor, Miami,
Florida 33130, 305-416-1604.
The Bidder/Proposer shall be responsible for assuring that the insurance certificates required in
conjunction with this Section remain in effect for the duration of the contractual period; including any and
all option terms that may be granted to the Bidder/Proposer.
Page 75 of 90
Invitation for Bid (IFB) 107067,4
1.49. INVOICES - Invoices shall contain purchase order number and details of goods and/or services
delivered (i.e. quantity, unit price, extended price, etc): and in compliance with Chapter 218 of the Florida
Statutes (Prompt Payment Act).
1.50. LOCAL PREFERENCE - City Code Section 18-85, states that the City Commission may offer to a
responsible and responsive bidder/proposer, who maintains a Local Office, the opportunity of accepting a
bid at the low bid amount, if the original bid amount submitted by the local vendor is not more than ten
percent (10%) in excess of the lowest other responsible and responsive bidder/proposer.
1.51. MANUFACTURER'S CERTIFICATION - The City reserves the right to request from
bidders/proposers a separate Manufacturer's Certification of all statements made in the bid/proposal.
Failure to provide such certification may result in the rejection of bid/proposal or termination of
contract/agreement, for which the bidder/proposer must bear full liability.
1.52. MINORITY/WOMEN PROCUREMENT PROGRAM - Ordinance No. 10062, as amended, titled
the Minority and Women Business Affairs and Procurement Ordinance of the City of Miami, Florida, sets
forth "...a goal of awarding at least 51 percent of the City's total annual dollar volume of all expenditures
for all goods and services to Black, Hispanic and Women minority business enterprises on an equal basis."
A minority business enterprise is defined as a business firm "...in which at least 51 percent of said
enterprise is owned by Blacks, Hispanics, or Women and whose management and daily business operations
are controlled by one or more Blacks, Hispanics or Women."
To achieve the goal established by these Ordinances, participation in providing goods and services to the
City by minorities is being encouraged in a number of ways. All bidders/proposers doing business with the
City are encouraged to include the participation of minority firms in their response. In evaluating
bids/proposals for determination of awards, minority participation may be a factor. Failure to adequately
involve minority firms may be a basis for rejecting any and all responses.
Possible ways to include minority participation would involve:
A. Joint venture with a minority firm(s)
B. Utilizing minority firn1(s) as subcontractor(s).
C. Utilizing minority firm(s) to supply goods and/or services.
D. Successful implementation of well defined affirmative action program.
E. Other forms of minority participation, if properly documented.
Successful bidder(s)/proposer(s) shall be required to establish an Affirmative Action Plan, if not, an
Affirmative Action Policy shall be established, pursuant to Ordinance #10062 as amended. Effective date
of implementation must be indicated on the policy.
A "Minority Status Information Sheet" is provided to assist bidders/proposers in presenting information
concerning minority participation.
Minority and women -owned business firms are encouraged, but not required, to register with the City prior
to submitting a response. The Purchasing Department, Minority/Women Business Affairs Office,. will
provide the necessary forms and instructions upon request. All bidders/proposers are urged to submit
responses for any goods or services that they are able to supply, regardless of minority classification.
However, compliance with all requests for information regarding Minority/Women Status or Participation
is required. Bidder's/Proposer's cooperation is greatly needed to aid the City in achieving its goal.
Bidders/Proposers may contact this Office at (305) 416-1913 for information.
1.53. MODIFICATIONS OR CHANGES 1N PURCHASE ORDERS AND CONTRACTS - No
contract or understanding to modify this Fon-nal Solicitation and resultant purchase orders or contracts, if
applicable, shall be binding upon the City unless made in writing by the Director of Purchasing of the City
of Miami, Florida through the issuance of a change order, addendum, amendment, or supplement to the
contract, purchase order or award sheet as appropriate.
1.54. NO PARTNERSHIP OR JOINT VENTURE - Nothing contained in this Contract will be deemed
or construed to create a partnership or joint venture between the City of Miami and Contractor, or to create
any other similar relationship between the parties.
1.55. NONCONFORMANCE TO CONTRACT CONDITIONS - Items may be tested for compliance
with specifications under the direction of the Florida Department of Agriculture and Consumer Services or
Page 76 of 90
Invitation for Bid (IFB) 107067,4
by other appropriate testing Laboratories as determined by the City. The data derived from any test for
compliance with specifications is public record and open to examination thereto in accordance with
Chapter 119, Florida Statutes. Items delivered not conforming to specifications may be rejected and
returned at Bidder's/Proposer's expense. These non -conforming items not delivered as per delivery date in
the response and/or Purchase Order may result in bidder/proposer being found in default in which event
any and all re -procurement costs may be charged against the defaulted contractor. Any violation of these
stipulations may also result in the supplier's name being removed from the City of Miami's Supplier's list.
1.56. NONDISCRIMINATION—Bidder/Proposer agrees that it shall not discriminate as to race, sex,
color, age, religion, national origin, marital status, or disability in connection with its performance under
this formal solicitation. Furthermore, Bidder/Proposer agrees that no otherwise qualified individual shall
solely by reason of his/her race, sex, color, age, religion, national origin, marital status or disability be
excluded from the participation in, be denied benefits of, or be subjected to, discrimination under any
program or activity.
In connection with the conduct of its business, including performance of services and employment of
personnel, Bidder/Proposer shall not discriminate against any person on the basis of race, color, religion,
disability, age, sex, marital status or national origin. All persons having appropriate qualifications shall be
afforded equal opportunity for employment.
1.57. NON-EXCLUSIVE CONTRACT/ PIGGYBACK PROVISION - At such times as may serve its
best interest, the City of Miami reserves the right to advertise for, receive, and award additional contracts
for these herein goods and/or services, and to make use of other competitively bid (govermnental)
contracts, agreements, or other similar sources for the purchase of these goods and/or services as may be
available.
It is hereby agreed and understood that this formal solicitation does not constitute the exclusive rights of
the successful bidder(s)/proposer(s) to receive all orders that may be generated by the City in conjunction
with this Formal Solicitation.
In addition, any and all commodities, equipment, and services required by the City in conjunction with
construction projects are solicited under a distinctly different solicitation process and shall not be purchased
under the terms, conditions and awards rendered under this solicitation, unless such purchases are
determined to be in the best interest of the City.
1.58. OCCUPATIONAL LICENSE - Any person, firm, corporation or joint venture, with a business
location in the City of Miami and is submitting a Response under this Formal Solicitation shall meet the
City's Occupational License Tax requirements in accordance with Chapter 31.1, Article I of the City of
Miami Charter. Others with a location outside the City of Miami shall meet their local Occupational
License Tax requirements. A copy of the license must be submitted with the response; however, the City
may at its sole option and in its best interest allow the Bidder/Proposer to supply the license to the City
during the evaluation period, but prior to award.
1.59. ONE PROPOSAL - Only one (1) Response from an individual, firm, partnership, corporation or
joint venture will be considered in response to this Formal Solicitation. When submitting an alternate
response, please refer to the herein condition for "Alternate Responses May Be Considered".
1.60. OWNERSHIP OF DOCUMENTS - It is understood by and between the parties that any documents,
records, files, or any other matter whatsoever which is given by the City to the successful Bidder/Proposer
pursuant to this formal solicitation shall at all times remain the property of the City and shall not be used by
the Bidder/Proposer for any other purposes whatsoever without the written consent of the City.
1.61. PARTIAL INVALIDITY - If any provision of this Contract or the application thereof to any person
or circumstance shall to any extent be held invalid, then the remainder of this Contract or the application of
such provision to persons or circumstances other than those as to which it is held invalid shall not be
affected thereby, and each provision of this Contract shall be valid and enforced to the fullest extent
permitted by law.
1.62 PERFORMANCE/PAYMENT BOND —A Contractor may be required to furnish a
Performance./Payment Bond as part of the requirements of this Contract, in an amount equal to one hundred
percent (100%) of the contract price.
1.63. PREPARATION OF RESPONSES (HARDCOPY FORMAT) —Bidders/Proposers are expected to
Page 77 of 90
Invitation for Bid (IFB) 107067,4
examine the specifications, required delivery, drawings, and all special and general conditions. All
bid/proposed amounts, if required, shall be either typewritten or entered into the space provided with ink.
Failure to do so will be at the Bidder's/Proposer's risk.
A. Each Bidder/Proposer shall furnish the information required in the Formal Solicitation. The
Bidder/Proposer shall sign the Response and print in ink or type the name of the Bidder/Proposer, address,
and telephone number on the face page and on each continuation sheet thereof on which he/she makes an
entry, as required.
B. If so required, the unit price for each unit offered shall be shown, and such price shall include
packaging, handling and shipping, and F.O.B. Miami delivery inside City premises unless otherwise
specified. Bidder/Proposer shall include in the response all taxes, insurance, social security, workmen's
compensation, and any other benefits normally paid by the Bidder/Proposer to its employees. If
applicable, a unit price shall be entered in the "Unit Price" column for each item. Based upon estimated
quantity, an extended price shall be entered in the "Extended Price" column for each item offered. In case
of a discrepancy between the unit price and extended price, the unit price will be presumed correct.
C. The Bidder/Proposer must state a definite time, if required, in calendar days for delivery of goods
and/or services.
D. The Bidder/Proposer should retain a copy of all response documents for future reference.
E. All responses, as described, must be fully completed and typed or printed in ink and must be signed in
ink with the firm's name and by an officer or employee having authority to bind the company or firm by
his/her signature. Bids/Proposals having any erasures or corrections must be initialed in ink by person
signing the response or the response may be rejected.
F. Responses are to remain valid for at least 180 days. Upon award of a contract, the content of the
Successful Bidder's/Proposer's response maybe included as part of the contract, at the City's discretion.
G. The City of Miami's Response Forms shall be used when Bidder/Proposer is submitting its response in
hardcopy format. Use of any other forms will result in the rejection of the response. IF SUBMITTING
HARDCOPY FORMAT, THE ORIGINAL AND THREE (3) COPIES OF THESE SETS OF FORMS,
UNLESS OTHERWISE SPECIFIED, AND ANY REQUIRED ATTACHMENTS MUST BE
RETURNED TO THE CITY OR YOUR RESPONSE MAY BE DEEMED NON-RESPONSIVE.
1.64. PRICE ADJUSTMENTS — Any price decrease effectuated during the contract period either by
reason of market change or on the part of the contractor to other customers shall be passed on to the City of
Miami.
1.65. PRODUCT SUBSTITUTES - In the event a particular awarded and approved manufacturer's
product becomes unavailable during the term of the Contract, the Contractor awarded that item may
arrange with the City's authorized representative(s) to supply a substitute product at the awarded price or
lower, provided that a sample is approved in advance of delivery and that the new product meets or exceeds
all quality requirements.
1.66. CONFLICT OF INTEREST, AND UNETHICAL BUSINESS PRACTICE PROHIBITIONS -
Contractor represents and warrants to the City that it has not employed or retained any person or company
employed by the City to solicit or secure this Contract and that it has not offered to pay, paid, or agreed to
pay any person any fee, commission, percentage, brokerage fee, or gift of any kind contingent upon or in
connection with, the award of this Contract.
1.67. PROMPT PAYMENT —Bidders/Proposers may offer a cash discount for prompt payment; however,
discounts shall not be considered in determining the lowest net cost for response evaluation purposes.
Bidders/Proposers are required to provide their prompt payment terns in the space provided on the Formal
Solicitation. If no prompt payment discount is being offered, the Bidder/Proposer must enter zero (0) for
the percentage discount to indicate no discount. If the Bidder/Proposer fails to enter a percentage, it is
understood and agreed that the terms shall be 2% 20 days, effective after receipt of invoice or final
acceptance by the City, whichever is later.
When the City is entitled to a cash discount, the period of computation will commence on the date of
delivery, or receipt of a correctly completed invoice, whichever is later. If an adjustment in payment is
necessary due to damage, the cash discount period shall commence on the date final approval for payment
Page 78 of 90
Invitation for Bid (IFB) 107067,4
is authorized. If a discount is part of the contract, but the invoice does not reflect the existence of a cash
discount, the City is entitled to a cash discount with the period commencing on the date it is determined by
the City that a cash discount applies.
Price discounts off the original prices quoted on the Price Sheet will be accepted from successful
bidders/proposers during the term of the contract.
1.68. PROPERTY - Property owned by the City of Miami is the responsibility of the City of Miami. Such
property furnished to a Contractor for repair, modification, study, etc., shall remain the property of the City
of Miami. Damages to such property occurring while in the possession of the Contractor shall be the
responsibility of the Contractor. Damages occurring to such property while in route to the City of Miami
shall be the responsibility of the Contractor. In the event that such property is destroyed or declared a total
loss, the Contractor shall be responsible for replacement value of the property at the current market value,
less depreciation of the property, if any.
1.69. PROVISIONS BINDING - Except as otherwise expressly provided in the resulting Contract, all
covenants, conditions and provisions of the resulting Contract shall be binding upon and shall inure to the
benefit of the parties hereto and their respective heirs, legal representatives, successors and assigns.
1.70. PUBLIC ENTITY CRIMES - A person or affiliate who has been placed on the convicted vendor list
following a conviction for a public entity crime may not submit a response on a contract to provide any
goods or services to a public entity, may not submit a response on a contract with a public entity for the
construction or repair of a public building or public work, may not submit responses on leases of real
property to a public entity, may not be awarded or perform work as a contractor, supplier, subcontractor, or
consultant under a contract with any public entity, and may not transact business with any public entity in
excess of the threshold amount provided in Section 28 7.017, for CATEGORY TWO for a period of 36
months from the date of being placed on the convicted vendor list.
1.71. PUBLIC RECORDS - Contractor understands that the public shall have access, at all reasonable
times, to all documents and information pertaining to City contracts, subject to the provisions of Chapter
119, Florida Statutes, and City of Miami Code, Section 18, Article III, and agrees to allow access by the
City and the public to all documents subject to disclosure under applicable law. Contractor's failure or
refusal to comply with the provision of this section shall result in the inunediate cancellation of this
Contract by the City.
1.72. QUALITY OF GOODS, MATERIALS, SUPPLIES, PRODUCTS, AND EQUIPMENT - All
materials used in the manufacturing or construction of supplies, materials, or equipment covered by this
solicitation shall be new. The items bid/proposed must be of the latest make or model, of the best quality,
and of the highest grade of workmanship, unless as otherwise specified in this Solicitation.
1.73. QUALITY OF WORK/SERVICES - The workiservices perfonned must be of the highest quality
and workmanship. Materials furnished to complete the service shall be new and of the highest quality
except as otherwise specified in this Solicitation.
1.74. REMEDIES PRIOR TO AWARD (Sea 18-106) - If prior to Contract award it is determined that a
formal solicitation or proposed award is in violation of law, then the solicitation or proposed award shall be
cancelled by the City Cominission, the City Manager or the Chief Procurement Officer, as may be
applicable, or revised to comply with the law.
1.75. RESOLUTION OF CONTRACT DISPUTES (See. 18-105)
(a) Authority to resolve Contract disputes. The City Manager, after obtaining the approval of the city
attorney, shall have the authority to resolve controversies between the Contractual Party and the city which
arise under, or by virtue of, a Contract between them; provided that, in cases involving an amount greater
than 525,000, the City Commission must approve the City Manager's decision. Such authority extends,
without limitation, to controversies based upon breach of Contract, mistake, misrepresentation or lack of
complete performance, and shall be invoked by a Contractual Party by submission of a protest to the City
Manager.
(b) Contract dispute decisions. If a dispute is not resolved by mutual consent, the City Manager shall
promptly render a written report stating the reasons for the action taken by the City Cominission or the City
Manager which shall be final and conclusive. A copy of the decision shall be irmnediately provided to the
protesting party, along with a notice of such party's right to seek judicial relief, provided that the protesting
Page 79 of 90
Invitation for Bid (IFB) 107067,4
parry shall not be entitled to such judicial relief without first having followed the procedure set forth in this
section.
1.76. RESOLUTION OF PROTESTED SOLICITATIONS AND AWARDS (Sec. 18-104)
(a) Right to protest. The following procedures shall be used for resolution of protested solicitations and
awards except for purchases of goods, supplies, equipment, and services, the estimated cost of which does
not exceed 525,000.
Protests thereon shall be governed by the Administrative Policies and Procedures of Purchasing.
l.Protest of Solicitation.
i. Any prospective proposer who perceives itself aggrieved in connection with the solicitation of a Contract
may protest to the Chief Procurement Officer. A written notice of intent to file a protest shall be filed with
the Chief Procurement Officer within three days after the Request for Proposals, Request for Qualifications
or Request for Letters of Interest is published in a newspaper of general circulation. A notice of intent to
file a protest is considered filed when received by the Chief Procurement Officer; or
ii. Any prospective bidder who intends to contest the Solicitation Specifications or a solicitation may
protest to the Chief Procurement Officer. A written notice of intent to file a protest shall be filed with the
Chief Procurement Officer within three days after the solicitation is published in a newspaper of general
circulation. A notice of intent to file a protest is considered filed when received by the Chief Procurement
Officer.
2. Protest of Award.
i. Any actual proposer who perceives itself aggrieved in connection with the recommended award of
Contract may protest to the Chief Procurement Officer. A written notice of intent to file a protest shall be
filed with the Chief Procurement Officer within two days after receipt by the proposer of the notice of the
City Manager's recommendation for award of Contract. The receipt by proposer of such notice shall be
confirmed by the city by facsimile or electronic mail or U.S. mail, return receipt requested. A notice of
intent to file a protest is considered filed when received by the Chief Procurement Officer; or
ii. Any actual Responsive and Responsible Bidder whose Bid is lower than that of the recommended bidder
may protest to the Chief Procurement Officer. A written notice of intent to file a protest shall be filed with
the Chief Procurement Officer within two days after receipt by the bidder of the notice of the city's
determination of non responsiveness or non responsibility. The receipt by bidder of such notice shall be
confirmed by the city by facsimile or electronic mail or U.S. mail, return receipt requested. A notice of
intent to file a protest is considered filed when received by the Chief Procurement Officer.
iii. A written protest based on any of the foregoing must be submitted to the Chief Procurement Officer
within five (5) days after the date the notice of protest was filed. A written protest is considered filed when
received by the Chief Procurement Officer.
The written protest may not challenge the relative weight of the evaluation criteria or the formula for
assigning points in making an award determination.
The written protest shall state with particularity the specific facts and law upon which the protest of the
solicitation or the award is based, and shall include all pertinent documents and evidence and shall be
accompanied by the required Filing Fee as provided in subsection (f). This shall form the basis for review
of the written protest and no facts, grounds, documentation or evidence not contained in the protester's
submission to the Chief Procurement Officer at the time of filing the protest shall be permitted in the
consideration of the written protest.
No time will be added to the above limits for service by mail. In computing any period of time prescribed
or allowed by this section, the day of the act, event or default from which the designated period of time
begins to run shall not be included. The last day of the period so computed shall be included unless it is a
Saturday, Sunday or legal holiday in which event the period shall run until the end of the next day which is
neither a Saturday, Sunday or legal holiday. Intermediate Saturdays, Sundays and legal holidays shall be
excluded in the computation of the time for filing.
(b) Authority to resolve protests. The Chief Procurement Officer shall have the authority, subject to the
approval of the City Manager and the city attorney, to settle and resolve any written protest. The Chief
Procurement Officer shall obtain the requisite approvals and communicate said decision to the protesting
party and shall submit said decision to the City Commission within 30 days after he/she receives the
Page 80 of 90
Invitation for Bid (IFB) 107067,4
protest. In cases involving more than 525,000, the decision of the Chief Procurement Officer shall be
submitted for approval or disapproval thereof to the City Commission after a favorable recommendation by
the city attorney and the City Manager.
(c) Compliance with filing requirements. Failure of a party to timely file either the notice of intent to file a
protest or the written protest, together with the required Filing Fee as provided in subsection (f), with the
Chief Procurement Officer within the time provided in subsection (a), above, shall constitute a forfeiture of
such party's right to file a protest pursuant to this section. The protesting party shall not be entitled to seek
judicial relief without first having followed the procedure set forth in this section
(d) Stay of Procurements during protests. Upon receipt of a written protest filed pursuant to the
requirements of this section, the city shall not proceed further with the solicitation or with the award of the
Contract until the protest is resolved by the Chief Procurement Officer or the City Commission as provided
in subsection (b) above, unless the City Manager makes a written determination that the solicitation process
or the Contract award must be continued without delay in order to avoid an immediate and serious danger
to the public health, safety or welfare.
(e) Costs. All costs accruing from a protest shall be assumed by the protestor.
(f) Filing Fee. The written protest must be accompanied by a filing fee in the form of a money order or
cashier's check payable to the city in an amount equal to one percent of the amount of the Bid or proposed
Contract, or 55000.00, whichever is less, which filing fee shall guarantee the payment of all costs which
may be adjudged against the protestor in any administrative or court proceeding. If a protest is upheld by
the Chief Procurement Officer and/or the City Commission, as applicable, the filing fee shall be refunded
to the protestor less any costs assessed under subsection (e) above. If the protest is denied, the filing fee
shall be forfeited to the city in lieu of payment of costs for the administrative proceedings as prescribed by
subsection (e) above.
1.77. SAMPLES - Samples of items, when required, must be submitted within the time specified at no
expense to the City. If not destroyed by testing, bidder(s)/proposer(s) will be notified to remove samples,
at their expense, within 30 days after notification. Failure to remove the samples will result in the samples
becoming the property of the City.
1.78. SELLING, TRANSFERRING OR ASSIGNING RESPONSIBILITIES - Contractor shall not sell,
assign, transfer or subcontract at any time during the term of the Contract, or any part of its operations, or
assign any portion of the perfonnance required by this contract, except under and by virtue of written
permission granted by the City through the proper officials, which may be withheld or conditioned, in the
City's sole discretion.
1.79. SERVICE AND WARRANTY —When specified, the bidder/proposer shall define all warranty,
service and replacements that will be provided. Bidders/Proposer must explain on the Response to what
extent warranty and service facilities are available. A copy of the manufacturer's warranty, if applicable,
should be submitted with your response.
1.80. SILENCE OF SPECIFICATIONS - The apparent silence of these specifications and any
supplemental specification as to any detail or the omission from it of detailed description concerning any
point shall be regarded as meaning that only the best commercial practices are to prevail and that only
materials of first quality and correct type, size and design are to be used. All workmanship and services is
to be first quality.
All interpretations of these specifications shall be made upon the basis of this statement.
If your firm has a current contract with the State of Florida, Department of General Services, to supply the
items on this solicitation, the bidder/proposer shall quote not more than the contract price; failure to comply
with this request will result in disqualification of bid/proposal.
1.81. SUBMISSION AND RECEIPT OF RESPONSES - Responses shall be submitted electronically via
the Oracle System or responses may be submitted in hardcopy format to the City Clerk, City Hall, 3500
Pan American Drive, Miami, Florida 33133-5504, at or before, the specified closing date and time as
designated in the IFB, RFP, RFQ, or RFLI. NO EXCEPTIONS. Bidders/Proposers are welcome to attend
the solicitation closing; however, no award will be made at that time.
A. Hardcopy responses shall be enclosed in a sealed envelope, box package. The face of the envelope,
box or package must show the hour and date specified for receipt of responses, the solicitation number and
Page 81 of 90
Invitation for Bid (IFB) 107067,4
title, and the name and return address of the Bidder/Proposer. Hardcopy responses not submitted on the
requisite Response Forms may be rejected. Hardcopy responses received at any other location than the
specified shall be deemed non-responsive.
Directions to City Hall:
FROM THE NORTH: I-95 SOUTH UNTIL IT TURNS INTO USI. USI SOUTH TO 27TH AVE.,
TURN LEFT, PROCEED SOUTH TO SO. BAYSHORE DR. (3RD TRAFFIC LIGHT), TURN LEFT, 1
BLOCK TURN RIGHT ON PAN AMERICAN DR. CITY HALL IS AT THE END OF PAN
AMERICAN DR. PARKING IS ON RIGHT.
FROM THE SOUTH: US 1 NORTH TO 27TH AVENUE, TURN RIGHT, PROCEED SOUTH TO SO.
BAYSHORE DR. (3RD TRAFFIC LIGHT), TURN LEFT, 1 BLOCK TURN RIGHT ON PAN
AMERICAN DR. CITY HALL IS AT THE END OF PAN AMERICAN DR. PARKING IS ON RIGHT.
B. Facsimile responses will not be considered.
C. Failure to follow these procedures is cause for rejection of bid/proposal.
D. The responsibility for obtaining and submitting a response on or before the close date is solely and
strictly the responsibility of Bidder/Proposer. The City of Miami is not responsible for delays caused by
the United States mail delivery or caused by any other occurrence. Responses received after the
solicitation closing date and time will be returned unopened, and will not be considered for award.
E. Late responses will be rejected.
F. All responses are subject to the conditions specified herein. Those which do not comply with these
conditions are subject to rejection.
G. Modification of responses already submitted will be considered only if received at the City before the
time and date set for closing of solicitation responses. All modifications must be submitted via the Oracle
System or in writing. Once a solicitation closes (closed date and/or time expires), the City will not consider
any subsequent submission which alters the responses.
H. If hardcopy responses are submitted at the same time for different solicitations, each response must be
placed in a separate envelope, box, or package and each envelope, box or package must contain the
information previously stated in 1.82.A.
1.82. TAXES - The City of Miami is exempt from any taxes imposed by the State and/or Federal
Government. Exemption certificates will be provided upon request. Notwithstanding, Bidders/Proposers
should be aware of the fact that all materials and supplies which are purchased by the Bidder/Proposer for
the completion of the contract is subject to the Florida State Sales Tax in accordance with Section 212.08,
Florida Statutes, as amended and all amendments thereto and shall be paid solely by the Bidder,/Proposer.
1.83. TERMINATION —The City Manager on behalf of the City of Miami reserves the right to terminate
this contract by written notice to the contractor effective the date specified in the notice should any of the
following apply:
A. The contractor is determined by the City to be in breach of any of the terms and conditions of the
contract.
B. The City has determined that such termination will be in the best interest of the City to terminate the
contract for its own convenience,
C. Funds are not available to cover the cost of the goods and/or services. The City's obligation is
contingent upon the availability of appropriate funds.
1.84 TERMS OF PAYMENT - Payment will be made by the City after the goods and/or services awarded
to a Bidder/Proposer have been received, inspected, and found to comply with award specifications, free of
damage or defect, and properly invoiced. No advance payments of any kind will be made by the City of
Miami.
Payment shall be made after delivery, within 45 days of receipt of an invoice and authorized inspection
and acceptance of the goods/services and pursuant to Section 218.74, Florida Statutes and other applicable
law.
1.85. TIMELY DELIVERY - Time will be of the essence for any orders placed as a result of this
Page 82 of 90
Invitation for Bid (IFB) 107067,4
solicitation. The City reserves the right to cancel such orders, or any part thereof, without obligation, if
delivery is not made within the time(s) specified on their Response. Deliveries are to be made during
regular City business hours unless otherwise specified in the Special Conditions.
1.86. TITLE - Title to the goods or equipment shall not pass to the City until after the City has accepted
the goods/equipment or used the goods, whichever comes first.
1.87.TRADE SECRETS EXECUTION TO PUBLIC RECORDS DISCLOSURE- All Responses
submitted to the City are subject to public disclosure pursuant to Chapter 119, Florida Statutes. An
exception may be made for "trade secrets."
If the Response contains information that constitutes a "trade secret", all material that qualifies for
exemption from Chapter 119 must be submitted in a separate envelope, clearly identified as "TRADE
SECRETS EXCEPTION," with your firm's name and the Solicitation number and title marked on the
outside.
Please be aware that the designation of an item as a trade secret by you may be challenged in court by any
person. By your designation of material in your Response as a "trade secret" you agree to indemnify and
hold harmless the City for any award to a plaintiff for damages, costs or attorney's fees and for costs and
attorney's fees incurred by the City by reason of any legal action challenging your claim.
1.88. UNAUTHORIZED WORK OR DELIVERY OF GOODS- Neither the qualified
Bidder(s)/Proposer(s) nor any of his/her employees shall perform any work or deliver any goods unless a
change order or purchase order is issued and received by the Contractor. The qualified
Bidder(s)/Proposer(s) shall not be paid for any work performed or goods delivered outside the scope of the
contract or any work performed by an employee not otherwise previously authorized.
1.89. USE OF NAME - The City is not engaged in research for advertising, sales promotion, or other
publicity purposes. No advertising, sales promotion or other publicity materials containing information
obtained from this Solicitation are to be mentioned, or imply the name of the City, without prior express
written permission of the City Manager or the City Commission.
1.90. VARIATIONS OF SPECIFICATIONS - For purposes of solicitation evaluation, bidders/proposers
must indicate any variances from the solicitation specifications and/or conditions, no matter how slight. If
variations are not stated on their Response, it will be assumed that the product fully complies with the
City's specifications.
Page 83 of 90
Invitation for Bid (IFB) 107067,4
2. Special Conditions
2.1. PURPOSE
The purpose of this Solicitation is to establish a contract, for the the purchase of Work and Latex Gloves -
Citywide, as specified herein, from a source(s) of supply that will give prompt and efficient service fully
compliant with the terms, conditions and stipulations of the solicitation.
2.2. DEADLINE FOR RECEIPT OF REQUEST FOR ADDITIONAL
INFORMATION/CLARIFICATION
Any questions or clarifications concerning this solicitation shall be submitted by email or facsimile to the
Purchasing Department, Attn: Terry Byrnes, CPPB; fax: (305) 400-5230 or email: tbymes@ci.miami.fl.us.
The solicitation title and number shall be referenced on all correspondence. All questions must be received
no later than Monday, December 29, 2008 at 3:00 PM. All responses to questions will be sent to all
prospective bidders/proposers in the form on an addendum. NO QUESTIONS WILL BE RECEIVED
VERBALLY OR AFTER SAID DEADLINE.
2.3. TERM OF CONTRACT
The Contract shall commence upon the date of notice of award and shall be effective for two (2) years with
the option to extend for two (2) additional one (1) year periods, subject to the availability of funds for
succeeding fiscal years.
Continuation of the contract beyond the initial period is a City prerogative; not a right of the bidder. This
prerogative will be exercised only when such continuation is clearly in the best interest of the City.
2.4. CONDITIONS FOR RENEWAL
Each renewal of this contract is subject to the following:
(1) Continued satisfactory performance compliance with the specifications, terms and conditions
established herein, and
(2) Availability of funds.
2.5. ESCALATION CLAUSE
The City acknowledges the fluctuating nature of prices for items specified. Accordingly an
escalator/de-escalator clause will be accepted only under the following conditions:
(1) Prices must remain fixed and firm for the first two years, price increase(s) and decrease(s) comparable
to documented manufacturer's price changes are provided. The maximum percentage increase over the
initial term prices shall not to exceed five (5.0%) percent within a 12 -month period. Escalated prices for
year(s) three and four of the contract, if any, shall remain fixed and firm during the applicable
contract year;
(2) Receipt of proper written notification to the Purchasing Department of all items affected by price
increases/decreases and
(3) All price increase(s) and decrease(s) must be approved/disapproved by the Purchasing Director.
The City may, after review, refuse to accept the adjusted costs if they are not properly documented,
increases are considered to be excessive, or decreases are considered to be insufficient. In the event the
City does not wish to accept the adjusted costs, and the matter cannot be resolved to the satisfaction of the
City, the City reserves the right to cancel the contract upon giving thirty (30) days notice to the Successful
Bidder.
2.6. NON -APPROPRIATION OF FUNDS
Page 84 of 90
Invitation for Bid (IFB) 107067,4
In the event no funds or insufficient funds are appropriated and budgeted or are otherwise unavailable in
any fiscal period for payments due under this contract, then the City, upon written notice to Successful
Bidder or its assignee of such occurrence, shall have the unqualified right to terminate the contract without
any penalty or expense to the City. No guarantee, warranty or representation is made that any particular
project(s) will be awarded to any firm(s).
2.7. METHOD OF AWARD
Award of this contract will be made to the lowest responsive and responsible Bidder(s) on an item by item
basis meeting Specifications. Bidders may bid on one or all items, however, if the City chooses to award
in the aggregate, and you have not bid on all items, your bid may be deemed non-responsive.
2.8. BIDDER'S MINIMUM QUALIFICATIONS
Bids will be considered only from firms that are regularly engaged in the business of providing goods
and/or services as described in this Bid; that have a record of performance for a minimum of three (3)
verifiable years and that have sufficient financial support, equipment and organization to insure that they
can satisfactorily provide the goods and/or services if awarded a Contract under the terms and conditions
herein stated. Bidder shall:
(1) Have no member, officer, or stockholder that is in arrears or in default of any debt or contract
involving the City, is a defaulter surety otherwise, upon any obligation to the City, and/or has failed to
perform faithfully on any previous contract with the City;
(2) Have no record of pending lawsuits or criminal activities and
(3) Have never been declared bankrupt.
2.9. DELIVERY
Successful Bidder shall make delivery of any item(s) ordered herein within five (5) days after receipt of
purchase order.
2.10. FAILURE TO PERFORM
Should it not be possible to reach the Successful Bidder or authorized representative and/or should
remedial action not be taken within 48 hours of any failure to perform according to specifications, the City
reserves the right to declare Successful Bidder in default of the contract or make appropriate reductions in
the contract payment.
2.11. EQUAL PRODUCT
Manufacturer's name, brand name and model/style number when used in these specifications are for the
sole purpose of establishing minimum requirements of levels of quality, standards of performance and
design required and is in no way intended to prohibit the bidding of other manufacturer's brands of equal
material, unless otherwise indicated. Equal (substitution) may be bid, provided product so bid is found to
be equal in quality, standards of performance, design, etc. to item specified, unless otherwise indicated.
Where equal is proposed, bid must be accompanied by complete factory information sheets
(specifications, brochures, etc.) and test results of unit bid as equal. Failure to do so at time of bid
may deem your bid non-responsive.
2.12. METHOD OF PAYMENT
Full payment will be made upon receipt and acceptance of a completed job. No down or partial down
payments will be made.
Page 85 of 90
Invitation for Bid (IFB) 107067,4
2.13. PACKING SLIP/DELIVERY TICKET TO ACCOMPANY ITEMS DURING DELIVERY
The Successful Bidder shall enclose a complete packing slip or delivery ticket with any items to be
delivered in conjunction with this bid solicitation. The packing slip shall be attached to the shipping
carton(s) which contain the items and shall be made available to the City's authorized representative during
delivery. The packing slip or delivery ticket shall include, at a minimum, the following information:
purchase order number; date of order; a complete listing of items being delivered; and back -order quantities
and estimated delivery of back -orders if applicable.
2.14. ADDITIONS/DELETIONS OF FACILITIES/PRODUCTS
Although this Solicitation identifies specific facilities/products to be serviced, it is hereby agreed and
understood that any facilities/products may be added/deleted to/from this contract at the option of the City.
When an addition to the contract is required, the Successful Bidder(s) under this contract shall be invited to
submit price quotes for these new facilities/products. If these quotes are comparable with market prices
offered for similar facilities/products, they shall be added to the contract, whichever is in the best interest of
the City, and an addendum and a separate purchase order shall be issued by the City.
2.15. CONTRACT ADMINISTRATOR
Upon award, Successful Bidder shall report and work directly with Terry Byrnes, CPPB, Sr. Procurement
Specialist, at 305-416-1917, who shall be designated as the Contract Administrator.
2.16. SAMPLES
The Bidder shall provide upon request, a complete and accurate sample of the product(s), which they
propose to furnish.
2.17. TIE -BIDS
Whenever two or more Bids which are equal with respect to price, quality and service are received by the
City for the procurement of commodities or contractual services, a Bid received from a business that
certifies that it has implemented a drug-free workplace program shall be given preference in the award
process. Established procedures for processing tie Bids will be followed if none of the tied vendors have a
drug-free workplace program. In order to have a drug-free workplace program, a business shall:
(1) Publish a statement notifying employees that the unlawful manufacture, distribution, dispensing,
possession, or use of a controlled substance is prohibited in the workplace and specifying the action that
will be taken against employees for violations of such prohibition,
(2) Inform employees about the dangers of drug abuse in the workplace, the business' policy of
maintaining a drug-free workplace, any available drug counseling, rehabilitation, and employee assistance
programs, and the penalties that may be imposed upon employees for drug abuse violations;
(3) Give each employee engaged in providing the commodities or contractual services that are under Bid a
copy of the statement specified in subsection (1);
(4) In the statement specified in subsection (1), notify the employees that, as a condition of working on the
commodities or contractual services that are under Bid, the employee will abide by the terms of the
statement and will notify the employer of any conviction or plea of guilty or nolo contendere to any
violation of Chapter 893 or of any controlled substance law of the United States or any state, for a violation
occurring in the workplace no later than five (5) days after such conviction;
(5) Impose a sanction on, or require the satisfactory participation in a drug abuse assistance or
rehabilitation program, if such is available in the employee's community, by any employee who is so
convicted and
(6) Make a good faith effort to continue to maintain a drug-free workplace through implementation of this
section.
Page 86 of 90
Invitation for Bid (IFB) 107067,4
2.18. LIQUIDATED DAMAGES
Successful Bidder shall provide all items at the guaranteed delivery time specified by the City in the
Delivery Section of this Solicitation. If the Successful Bidder fails to deliver within the specified delivery
time, it is understood that 1% of the unit price per calendar day per item will be deducted, as liquidated
damages, for each day beyond the specified delivery time (not to exceed the total amount of the contract),
not as a penalty but as compensation for the loss of the product's use during such time.
2.19. NO SUBSTITUTION
When "No Substitution" is used in combination with a manufacturer's name, brand name and/or model
number, that named item is the only item that will be accepted by the City.
2.20. WARRANTY BY MANUFACTURER
The manufacturer's standard warranty must be described for each glove line item shown. Failure to comply
with this provision may disqualify line item bid.
2.21. WARRANTY, FITNESS FOR PURPOSE
The vendor warrants items supplied under this contract conform to specifications herein, and are fit for the
purpose for which such goods are ordinarily employed; except if stated in a Special Condition, the material
must be fit for that particular purpose. The vendor and the City agree that orders under this contract do not
exclude, or in any way limit, other warranties, provided in this agreement or by law.
2.22. QUALITY AND MANUFACTURE
The apparent silences of these specifications as to any details or the apparent omission of a detailed
description concerning any point, shall be regarded as meaning that only materials and workmanship of
first quality are to be used. All interpretations of these specifications shall be made upon the basis of this
statement.
Specifications, brands and manufacturers' names, where given, are to establish product type and quality
required. Any equal thereto will be considered, subject to the approval of the City of Miami. Bidders shall
indicate on the Bid Sheets, the manufacturer, brand and model or style number they intend to supply to the
City, for each item Bid. All materials shall be new, of current manufacture, and shall carry standard
warranties. No substitutions shall be allowed after the Bid is awarded unless so authorized by the City.
The City reserves the right to perform its own testing procedures or to send any and all samples to any
certifiable laboratory for analysis. Any and all costs for testing shall be borne by Bidder. On the basis of
this testing and analysis, the City shall be sole judge of the acceptability of the sample in conjunction with
the Bid specifications and its decision shall be final. Any sample submitted shall create an express warranty
that the whole of the goods and/or services to be provided by the Bidder during the contract period shall
conform to the sample submitted. The Bidder shall be required to provide adequate restitution to the City,
in the manner prescribed by the City, if this warranty is violated during the term of the contract.
2.23. PRODUCT SUBSTITUTES
In the event a particular approved and awarded manufacturer's product becomes unavailable during the
term of the Contract, the Successful Bidder awarded that item may arrange with the authorized City
representative, to supply a substitute product at the Bid price or lower, provided that a sample is approved
beforehand and that the new product meets or exceeds all quality requirements. Successful Bidder shall
replace items purchased by the City which are of unacceptable quality or which are detennined by the using
department unserviceable for any reasons. Items covered by express warranty shall be governed by terms
and conditions therein.
Page 87 of 90
Invitation for Bid (IFB) 107067,4
2.24. BALANCE OF LINE
While the city has listed all needed items on the Bid Solicitation, which are utilized citywide
in conjunction with its operations, there may be ancillary items that must be purchased by the City during
the term of this contract. For this reason, Bidders are requested to quote the percentage discount that will be
offered to the City for items which do not appear on this Bid Solicitation. This discount shall be offered for
all items listed in nationally, established annual retail supply catalogs. The most recently published catalog
shall serve as the basis for establishing the retail price to be discounted.
Successful Bidder(s) shall submit, with their Bid, the product catalog, published price list, or other
verifiable pricing source(s) for the products they offer as the Balance of Line.
2.25. REFERENCES
Each Bid must be accompanied by a list of three (3) verifiable references, as indicated in the
Header/Attributes Section of this Bid, which shall include the name of the company, dates of contract,
description of goods supplied, a contact person and the telephone number. NO BID WILL BE
CONSIDERED WITHOUT THIS LIST.
2.26. SPECIFICATION EXCEPTIONS
Specifications are based on the most current literature available. Bidder shall notify the City of Miami
Purchasing Department, in writing, no less than ten (10) days prior to Solicitation closing date of any
change in the manufacturers' specifications which conflict with the specifications. For hard copy Bid
submittals, Bidders must explain any deviation from the specifications in writing as a footnote on the
applicable specification page and enclose a copy of the manufacturer's specifications data detailing the
changed item(s) with the Bid submittal. For electronic Bid submittals, Bidders must explain in the Header
Section or by an Attachment and, if applicable, enclose a scanned copy of the manufacturer's specifications
data detailing the changed item(s) with the Bid submittal. Additionally, Bidders must indicate any options
requiring the addition of other options, as well as those which are included as a part of another option.
Failure of Bidders to comply with these provisions will result in Bidders being held responsible for all costs
required to bring the item(s) in compliance with contract specifications.
2.27. TERMINATION
A. FOR DEFAULT
If Successful Bidder defaults in its performance under this Contract and does not cure the default within 30
days after written notice of default, the City Manager may terminate this Contract, in whole or in part, upon
written notice without penalty to the City of Miami. In such event the Successful Bidder shall be liable for
damages including the excess cost of procuring similar supplies or services: provided that if, (1) it is
determined for any reason that the Successful Bidder was not in default or (2) the Successful Bidder's
failure to perform is without Successful Bidder's or its subcontractor's control, fault or negligence, the
termination will be deemed to be a termination for convenience by the City of Miami.
B. FOR CONVENIENCE
The City Manager may terminate this Contract, in whole or in part, upon 30 days prior written notice
when in the best interest of the City of Miami. If this Contract is for supplies, products, equipment, or
software, and so terminated for convenience by the City of Miami the Successful Bidder will be
compensated in accordance with an agreed upon adjustment of cost. To the extent that this Contract is for
services and so terminated, the City of Miami shall be liable only for payment in accordance with the
payment provisions of the Contract for those services rendered prior to termination.
2.28. ADDITIONAL TERMS AND CONDITIONS
Page 88 of 90
Invitation for Bid (IFB) 107067,4
No additional terms and conditions included with the Bid response shall be evaluated or considered, and
any and all such additional terms and conditions shall have no force or effect and are inapplicable to this
Bid. If submitted either purposely, through intent or design, or inadvertently, appearing separately in
transmittal letters, specifications, literature, price lists or warranties, it is understood and agreed that the
General and Special Terms and Conditions in this Bid Solicitation are the only conditions applicable to this
Bid and that the Bidder's authorized signature affixed to the Bidder's acknowledgment form attests to the
same.
2.29. PRIMARY CLIENT (FIRST PRIORITY)
The Successful Bidder(s) agree upon award of this contract that the City of Miami shall be its primary
client and shall be serviced first during a schedule conflict arising between this contract and any other
contract Successful Bidder(s) may have with any other cities and/or counties to perform similar services as
a result of any catastrophic events such as tornadoes, hurricanes, severe storms or any other public
emergency impacting various areas during or approximately the same time.
Page 89 of 90
3. Specifications
3.1. SPECIFICATIONSISCOPE OF WORK
Please see Line Item descriptions for item specifications.
Invitation for Bid (IFB) 107067,4
Page 90 of 90