HomeMy WebLinkAboutR-02-0955J-02-763
9/10/02
RESOLUTION NO. 02- 955
A RESOLUTION OF THE MIAMI CITY COMMISSION
APPROVING THE PURCHASE AND INSTALLATION FOR
THE DEPARTMENT OF GENERAL SERVICES
ADMINISTRATION ("GSA") OF A SURGE PROTECTION
SYSTEM FROM OMEGA POWER SYSTEMS, INC., UNDER
EXISTING SNAPS AGREEMENT NO. 2851929-3,
EFFECTIVE THROUGH MAY 1, 2003, SUBJECT TO ANY
EXTENSIONS BY THE STATE OF FLORIDA, AT AN
AMOUNT NOT TO EXCEED $84,700 AND A
CONTINGENCY RESERVE IN THE AMOUNT OF $10,000,
FOR A TOTAL AMOUNT NOT TO EXCEED $94,700;
ALLOCATING FUNDS FROM CAPITAL IMPROVEMENT
PROJECT ACCOUNT CODE NO. 311042.429301.6.830.
WHEREAS, it is necessary for the Department of General
Services Administration ("GSA") to purchase and install a Surge
Protection System to protect the Miami Riverside Center ("MRC")
from catastrophic damage and harm to the building's electronic
system; and
WHEREAS, funds are available from Capital Improvement
Project Account Code No. 311042.429301.6.830; and
WHEREAS, the City Manager and the Director of the Department
of GSA recommend the purchase and installation of a such system
CITY COMMISS%ON
MEETING CIE
S E P 1 1 2002
Hesc-lotion No.
02- 955
from Omega Power Systems, Inc., utilizing existing SNAPS
Agreement No. 2851929-3, be approved;
NOW, THEREFORE, BE IT RESOLVED BY THE COMMISSION OF THE CITY
OF MIAMI, FLORIDA:
Section 1. The recitals and findings contained in the
Preamble to this Resolution are adopted by reference and
incorporated as if fully set forth in this Section.
Section 2. The purchase and installation of a surge
protection system for the Department of GSA from Omega Power
Systems, Inc, under SNAPS Agreement No. 2851929-3, effective
through May 1, 2003, subject to any extensions by the State of
Florida, at an amount not to exceed $84,700 and a contingency
reserve in the amount of $10,000 for a total amount not to exceed
$94,700, is approved, with funds allocated from Capital
Improvement Project Account Code No. 311042.429301.6.830.
Section 3. This Resolution shall become effective
immediately upon its adoption and signature of the Mayor'/
1� If the Mayor does not sign this Resolution, it shall become
effective at the end of ten calendar days from the date it was
passed and adopted. If the Mayor vetoes this Resolution, it
shall become effective immediately upon override of the veto by
the City Commission.
Page 2 of 3
02- 955
0
PASSED AND ADOPTED this 11th day of September , 2002.
ATTEST:
PR ILLA A. THOMPSON
CI CLERK _
APPROVED
CORRECTNESS:
Page 3 of 3
EL A. DIAZ, MAYO
tou
02- 955
CITY OF MIAMI, FLORIDA . CA=9
INTER -OFFICE MEMORANDUM
TO: The Honorable Mayor and Members DATE: i 1J 7 2302 FILE:
of the City Commission
SUBJECT: Resolution Authorizing
The Purchase of a Surge
Protection System for
FROM: m eZ REFERENCES : The MRC; SNAPS
5#nag ENCLOSURES: Agreement No. 2851929-3
RECOMMENDATION
It is respectfully recommended that the City Commission adopt the attached Resolution
authorizing the purchase of a Surge Protection System for the Department of General
Services Administration to be used at the Miami Riverside Center. Funding is available
from Capital Improvement Project, Account Code No. 311042.429301.6.830, in an
amount not to exceed $84,700 and a contingency reserve in the amount of $10,000, for a
total amount of $94,700. This purchase shall be made under an existing State Negotiated
Agreement Price Schedule, SNAPS Agreement No. 2851929-3 from Omega Power
Systems, Inc., a Non-Minority/Non-Local vendor located at 407 Hastings St., Boca
Raton, Florida 33487.
BACKGROUND
The Department of General Services Administration, Miami Riverside Center Division, is
not equipped with any kind of protection against surge or lightning at this time. The
purchase of a new surge protection system will not only protect the MRC building from
catastrophic damage, but will prevent harm into the building's electronic system.
The system most required for the Miami Riverside Center is a comprehensive transient
voltage surge suppression (TVSS). Several benefits of TVSS include: 1) reduction of
catastrophic electrical and electronic losses; 2) increased service life of motors, batteries
(UPS systems especially) and data telecommunications equipment; and 3) keeping
mission critical systems up and running at a higher level of availability.
FISCAL IMPACT: NONE
CAG/FK
Yir9-�-
R/ nbd
02- 955
Budgetary Impact Analysis
1. Department GENERAL SVCS. ADMINISTRATI&vision MIAMI RIVERSIDE CENTER
2. Agenda Item # (if available)
3. Title and brief description of legislation or attach ordinance/resolution:
SURGE,PROTECTION SYSTEM
4. _ Is this item related to revenue? NO: xx YES (If yes, skip to item #7.)
5. Are there sufficient funds in Line Item?
YES: XY, Index Code 429301 Minor Obi. Code 830 Amount $ 94,700
NO: _ Complete the following questions.
6. Source of funds: Amount budgeted in the Line Item $
Amount needed in the Line Item $
Sufficient funds will be transferred from the following line items:
ACTION ACCOUNT NUMBER ACCOUNT NAME TOTAL
Indez/Minor Object/Project No.
From $
To $
7. Any additional comments? -
Capital Improvement Project, Account Number 311042.429301.6.830
.� V2i
_ z
Approved b C Administrator
.ZO8 /�,lV 4 2 0--Ll-
'10V
Z'10V Departme t Dfor esignee Date
FOR DEPARTMENT QV MANAGEMENT AND -BUDGET USE ONLY
Verified by:
Verified by:
Department of Management and Budget Director/Designee
Budget Analyst
Date
Date
p2-•955
Facility Electrical Protection
Using
ERICO-Critec Products
Transient Voltage Surge Suppression
Prepared for
City of Miami
Riverside Center
Dade County, Florida
11i'
Omega Power Systems, Inc.
Boca Raton, Florida
O COPYRIGHT 1 SS 1-2002 OMEGA POWER SYSTEMS, INC. MAY NO s W COPIED OR REPRODUCED
WI umm Exmm WRRTEN PERMISSION OF OMEGA POWER SYSTEMS, INC. ALL RwHTS RE omm
May 31, 2002
02- 955
Omega Power
407Hasti+oca Raton FL 33447
May 31, 2002
Mike Mejia
MRC Facility, Manager
The City of Miami Riverside Center
444 SW 2-d Ave., Miami, FL 33130
Re: surge suppression
Dear W Me*
0
Omega Power Systems, Inc. uses an engineered systems approach called "Facility Electrical Protection"
(FEP). This FEP program has been applied to the systems at your RIVERSIDE CENTER facility. The
system most required at your facility is comprehensive transient voltage surge suppression (TVSS).
This system will not only protect from catastrophic damage due to lightning, if introduced into your
building's electrical system, but also the hidden, more discreet decay to sensitive electronics of all types,
sometimes referred to as electronic rust. This is the more often ignored of the power anomalies.
Benefits from comprehensive TVSS :
1. Reduction of catastrophic electrical and electronic losses (big hits)
2. Reduction of decaying transients. (accumulating little hits) These wear out equipment. They are especially
difficult to quantify. How can a dollar figure be put on the loss of controls to an elevator, or power to
a/c? What about lost time for a whole floor of employees when bulbs and ballast changeout continually
disrupts their work schedule? Desktop computers that no longer run software correctly? The loss of
safety services such as Fire Alarm systems and access systems, cameras for security, etc. cannot, in our
opinion be quantified.
3. Increased service life of motors, batteries (GYPS systems especially), data telecommunications equipment.
4. Lower costs of maintenance or, more appropriately, increased availability of staff to perform waiting work
orders.
5. Defense: Safety / Security / Access systems protection. Keeping mission critical systems up and running
at a higher level of availability.
Points one, two and three are most closely related to quick payback. Payback can be easily understood
after the first loss of any major system. Even the nuisance of having to reset systems without any
catastrophic damage can be counterproductive to the City of Miami's core mission — `distraction of
function' by not being able to deliver core functions of the RIVERSIDE Center.
If you have any questions or need further information, feel free browse our website at
If you have any questions or would like to discuss these recommendations
act us at our offices.
407 Hastings Street / Boca Raton, Florida, 33487 / Tel: 561.997.0663 / Fax: 561.997.2801
02— 955
Omega Power systems Transient voltage Surge Suppression 5/24/02
City of Miami Page 1
Priority 1
Fire Control Room
5th Floor Data/Telecom
5th Floor Electric Room
Rooftop Electric Room
Sensitive Computer Loads
Priority 2
10th Floor Electric Room
9th Floor Electric Room
8th Floor Electric Room
7th Floor Electric Room
6th Floor Electric Room
4th Floor Electric Room
3rd Floor Electric Room
2nd Floor Electric Room
1st Floor Electric Room
Priority 3
A/C Disconnects
Kitchen
Building Control System
Parking Garage
Subtotal
Subtotal
Subtotal
Project Total .........................................
SNAPS Vendor. Omega Power Systems, Inc., 407 Hastings st. Boca Raton, FL 33487
SNAPS Vendor. 2851929-3
SNAPS Product Manufacturer. ERICO - Critec, Solon, OH
ALL Prices SNAPS 2002
price list effective date: May 1, 2002
$2,173.60
$2,788.00
$4,060.00
$3,831.00
$20,300.00
$33,132.60
$2,436.00
$1,624.00
$1,624.00
$1,624.00
$2,123.00
$2,123.00
$2,436.00
$2,436.00
$14,265.00
$30,691.00
$7,618.00
$3,207.00
$3,992.40
$6,039.00
$20,836.40
$84,700.00
http:/twww.omegaps.com morepower@omegaps.com
1-561-997-0663 phone . 1-561-997 2801 fax
02- 955
Omega Power Sys&= Traxdext Vokage Surge Suppression 5/24/02
City of Miami Page 2
Fin
2
Comml S
SLPl-RJl l
Fire Alarm Signal Box Comm Protection
1
TDF10A-120V
Fire Alarm Signal Box
1
TDX100-277/480
Panel HHE1 feeds Fire Alarm System
1
SLP1-RJ11
Bldg Control System - VAV Boxes .
2
TDF10A-120V
Bldg Control System - Infinity Box, Smoke Damper Box
1
CSP BNC 90
Bldg Control System
1
SP8-DBS
Bldg Control System - Point of Use
Egaipmeat and imbMadou Cost ............... $2,173.60
Sth
Floor - Data/Telecom
8
RJ8X-140
T-1 Lines, room 520
1
S-PDB25
Phone Protection, 25 pair
Equipment aad installation Cost ............... $2,788.00
Sth
Floor - Electric Bm
4
TDX 100-277/480
Panels HTS, HHS, HHE2, CE
1
TDX100-120/208
Panel TF
Equipmea and iasngation Cast ............... $4,060.00
- RooftoE
Electrical Boom
1
TDX150-277/480
Panel ACT
1
TDX100-277/480
Panel ACE
2
TDX50 277/480
Elevator Disconnects- passenger, freight
2
TDX50 277/480
Cooling Tower Disconnects
Egaipmeat and imoaWdoa Cost .............. $3,831.00
Sensitive
25
Comonter Loads
TDX100-120/208
Panels 1HL2; HL3; H13A; HL4,4A,4B; HL5,5A,5B; HL6,HL6A;
HL7,7A,7B; HL8,8A,8B; HL9,9A,9B; HL10,A,B,C,HLE3
Egaipmeat and insudladon Cast .............. $20,300.00
httpJ/www.omegaps.com morepoweroomegaps-com
1-561-997-0663 phone 1-561-997-2801 fax
02- 955
Omega Power Systems Transient Voltage Surge Swrarion 5/24/02
City Of m1am Page 3
8n
10th Floor Electric Boom
3 TDX100-277/480 Panels HHE3, HH10, HT10
Equipment and imaffiWon Cost ............... $2,436.00
9th Floor Electric Boom
2 TDX100-277/480 Panels HT9, HH9
Equipment and imallation Cost. .............. $1,624.00
Sth Floor Electric Room
2 TDX100-277/480 Panels HTB, HH8
Equipment and insWk ion Cost ............... $1,624.00
7th Floor Electric Room
2 TDX 100-277/480 Panels HT7, HH7
Equipment and imtl iouCwL.............. $1,624.00
6th Floor Electric Room
2 TDX 100-277/480 Panels HH6, HT6
1 TDX50-120/208 Unidentified Panel
Equipment and ima lation CwL.............. $2,123.00
4th Floor Electric Room
2 TDX100-277/480 Panels HH4, HT4
1 TDX50-120/208 Panel HL4B(sub)
Equipment and ima!ladon CosL.............. $2,123.00
3rd Floor Electiric Room
3 TDX 100-277/480 Panels HT3, HH3, AC3
Equipment and insallation CosL.............. $2,436.00
2nd Floor Electric Room
2 TDX100-277/480 Panels HT2, HH2
1 TDX100-120/208 Panel HL2A
Equipment and imtanation CosL.............. $2,436.00
1st
Floor Electric Boom
2
TDX150-277/480
Panels DP, DE
3
SES200 277/480
Mains 1, 2, & 3
2
TDX100-277/480
Panels HHI, ACI
4
TDX50-120/208
Panels HLE1, HL1, S, HLIA
1
TDX50 277/480
Panel HT1
Equipment and imanation Cost.............. $14,265.00
httpJ/www.omegaps.com morepowerComegaps.com
1-561-997-0663 phone 1-561-997-2801 fax
U2� 955
Omega Power Syuems Transient Voltage Surge Suppression 5/2/02
City of Miami Page 4
A/C Disconnects
7 TDXI,00-277/480
1 TDX100-277/480
1 TDX50 277/480
Kitchen
I TDX100-277/480
3 TDX 100 FP
2 TDX200-120/208
DuAftg Control Svstem
9 SLPI-RJll
9 TDF10A-120V
9 SPS -DBS
P.Ugk Gacaee
I TDX150-277/480
1 TDX50-120/208
3 TDX100-277/480
1 TDX100-120/208
Units including fusing; AC4,5,6,7,8,9,10
Disconnect AC2
Roof mechanical room
Egaipmeat and hWWUdoa Coat ............... $7,618.00
Panel KH
Cover Plates for Recessed Panels
Panels KL, KP
Equipment and i=ft lation Cost ............... $3,207.00
Bldg Control System - comm protection per floor
Bldg Control System - power protection per floor
Bldg Control System - Point of Use per floor
Equipment and iaswMation Cost ............... $3,992.40
Main 1 of 3, DG
Panel PP, Water Heater, elevator A/C
Panels PL (pkg ltg), PLE (ltg), DGE (fire equpt)
Panel PPE (elevator lights, recovery wells)
Equipment sad installation cost ............... $6,039.00
httpJ/www.omegaps.com morepowerQomegaps.com
1-561-997-0663 phone 1-561-997-2801 fax
02- 955
State Pundasing • 4050 Esplanade War • Topalmssee, Florida 32399-0950
• To be completed by the Vendor
• SNAPS 1 True:_ SOCAE Sy*M Sro
level One Period , a nevv j JaAi�
Level TwoPreriod
Level Thee Period
a00s(42a-3
Lswel Four Period No. .
• Fedend Employment Iderdifiaolion or S.S. Nwnber (o S• O's 7-& St -1 • SPURS No. F 6S0 52 45x1 • o f
• Vendor Name omF-&,• Fk;W W- sgs� t rJC .
• vaidcx AAoriing Address SQ -7 _ WwTnN63 -6T. 'Gly DoLk cn-roo
• State i:L&*U—OA • Tip 3 3 tl$?
• Telephone Number
' ToA-Fine Nwnbw Boo -934-935 /
' 1rri0nnetAddtess %'� P= // ttiwk.►. b i1� /S.Ga^'�' • E-mdl Address 1*m-ftwtr RGRcsiw
• Area to be Served t=1,OI-WA Fax Number 511 -rill -ASO -1
•Wanonly VAME5.-• 10 To io *4044—FREE AMA-4048dM.15th M%CZUyr
PURPOM LkxW F Section 287.042(1 xa) and (2)(a). � rue pose of this proposal is to eslabhsh a negoti-
ated agroanent for or services that are not avoibble tram a Stole Term Centrad. The agnearrerrt will
provide Slab Purchasing an oWarsu my to @valuate, assess and determine the need, bernA and value of Commodities
or services, and the Feasrilx* of establishing stab term Cade acts, through des q6 --Aiilivep F m m e. The wiM
free elignble users from the nsoesih► of attaining competitive quolotiorK For a s1ien�ggllee of services
ock ing less ilan Ccbgony I. The ageeemer>f does not eligible users from the competitive biding processes
described in section 287.F.S. (or coennadities/services ager iFre amount of Category 1.
Mgrble users oro state -writers, Federal agencies, counties, rrwnicipo �es, and intslihdi m qualified prreserant b
240.605, F.S.; private non-profit conrexrnity 'on 020 3 conducting business related to the
Ca mnission For the Transportation Disadval suant to 427J:.S.
2. The establi-I -ret of this agrwrar* does not cons left an endorsement of the products or serviaesby State Puf4m ing.
3. SNAPS U agroemenas are not erxAmim and other vendors mar offer simibr product: and services.
Usage of SNAPS 11 by stale agencies a not mandatrw . Vendors and agencies using SNAPS 1 have other pu dvasing
alterralives available. These Wdiasing chu naiiveis aro defined in Chapter 2871S.
A6 ORDERMIG UAUM Stale agencies mor issue single pwclase orders up to Category 1, and total to
CATEGORY N in an agnsanerrt year. Tool ogency�wide aogegsiiions during the e�oodd�s ?w of the agreement shaE not
eaooeed the dweshold amount For Cdegory N, e000ept dot acquisitions ter agsescia with deoerttrnimed Purrdnas+ne
fw,ctian>: slap be considered an dee basis of each purrlasing office drat nainlairrs fuA-lune pemfiasirg staff.
S. PRICES, TERMS AND WMEMt Firm prices shop be offered and include al pocking, hae>ding, �pirng charges
and delivery wdee otherwise indioobd. The vendors name and address shaven an invoices n wt be idckrriool b the
vendors name and address on die purchase order.
(a) Tames: The Sloes of Fbd& does not par Fedad Excise and Saks tcvoss on direct of bngl�ls personal
pmp. See tax erxenrption IRMO r on Foos of punA man order or ogreenrent Farm l is eexernption does not coy to
purchoaes of tonAibte Porsortd propety in the pericnilanao of cgteanlenls ice the imptaoverrtantoiWevwnedred
properly as defined in Chapter 192, Florida Staiubs.
b) Invoicing and Paynw* The vendor shop be paid upon submission of properly aertil ed invoice b da p m:hm r at
02- 955
Confidential
Surge Products SNAPS H Price List
Effective: May 1, 2002
Suggested SNAPS N
Cribe Yodel a Desariptkan Price Cost
All panel units come with a ten year warranty
TDX50 Panel Series
TDX50120
1 Phase, 1201/ 2W+.G, 50kA / Phase
$
372.00
i
297.00
TD= 240
`• 1 Phase, 24QV, 2W+G, 50kA / Phase
$
372.00
$
297.00
TOM 120/240
SpUt Phase, 120/24M 3W+G, &*A / Phase
$
372.00
$
297.00
TD= 1201208
3 Phase, 3Y 120/208V, 4W+G, 50kA / Phase
S
467.00
$
306.00
TDX50 277/480
0l3
3 Phase. 3Y 277/480V, 4W+G, 50kA / Phase(2280v)
$
467.00
$
366.00
TDX50 347/600
3 Phase, 347/600V, 4W+G, 50kA / Phase
$
467.00
$
366.00
TDX50 FPI
Single Phase Flush Mounting late for recessed application
$
46A0 _
$
36.00
TDX50 FP3
Three Phase Flush Mounting plate for recessed application
$
45.00
t
36.00
50ka No Neutral (NN) applications use 4 wire model and bond N -G wires
TDX1 OO Panel Series
TDX1001201240
split
phase, 120/240V, 3W+G, 100kA / ph 2 sUge lights w/alarm contact
$
696.00
i
567.00
TDX1001201208
3
ph, 3Y 1 ZWMSY, 4W+G. 100kA / ph
$
849.00
i
679.00
TDX100 277/480
3
ph, 3Y 277/4801/ 4W+G, 100kA / ph (220/38N)
f
849.00
$
679.00
TDX10012=400
3
ph, 3D 120/240V, High Log Delta, 4W+G, 100kA / h
$
849.00
$
679.00
TDX100 48M NN
3
ph, 3Y 480V, 3W+G. 100kA / ph
$
806.00
$
646.00
TDX100 2400 NN
3
Et 3Y 240V, 3W+G, 100kA / ph
$
806.00
$
646.00
TDX100 3471600
.3
ph, 347MW. 4W+G, 100kA / ph
$
849.00
$
679.00
TDX100 FP
Flush Mount' Plate Accessory For recessed a
$
50.00
$
40.00.
TDX150 Panel Series
TDX150120/240
split
1 40V, 3W+G, 15MA / ph 2 stage lights w/alarm contact
$
946.00:
767.00
TDX1601201208
3 ph,
3Y 120/208V, 4W+G, 150kA / ph
$
1,112.00
$
890.00
TDX160 277/480
3 ph,
3Y 277/480V, 4W+G, 150kA / ph (220/380r)
$
1,112.00
$
890.00
TDX15012 naD
3 ph,
31) 120/240V, High Log Deka, 4W+G,150kA /ph
$
1,112.00
$
890.00
TDX150 480D NN
3 ph,
3Y 480V, 3W+G, 150VA / ph
$
9/6.00
$
767.00
TDX150 2400 NN
3 ph,
3Y 240V, 3W+G, 1&WA /
$
946.00
$
767.00
TDX160 347/600
3 ph,
3471f W. 4W+G, 150kA / ph
$
1,112.00
$
690.00
TDX1S0 FP
Flush Mourift Plate Accessory For recessed applications
$
66.00
$
44.00
Omega Power
Coefldeetial SNAPS 11
Price List May 1, 2002
1-561-9974MM
1-561-887-2801 fax
02- 955'
SES200 Panel Series
SES200120/240
1 Phase,120J240V, 3W+G, 200kA / Phase
$
1,687.00
S
1,349.10
SES200120MOF
1 Phase, I=40V, 3W+G, 200kA / Phase, with Filter
$
11890.00
S
1,512.00
SES20012VA40S
1 Phase, 120240V, 3W+G, 200kA /Phase, with Surge Counter
S
1,939.00
$
146130
SES200 1201240C
1 Phase, 120240V, 3W+G, 200kA / Phase, with Fater 3 Surge Courter
$
2,142.00
S
1,713.10
SES200120208
3 Phase, 1201208V, 4W+G, 200kA / Phase
$
11911.00
S
1.528.10
SES2001201208F
3 Phase 120208V, 4W+G, 200kA / Phase, with filter
$
2,114.00
$
1,691.20
3ES2001201208S
` 3 Phase 120=V, 4W+G, 200kA / Phase, with Su Counter
$
2,163.00
S
1,730.40
SES200 1201208C
3 Phase, 120208V, 4W+G, 200kA / Ph` W. with Fiber 3 Surge Courter
$
2,166.00
1,852.80"
SES200 277/480
3 Phase 277/480V, 4W+G, 200kA / Phase
S
1,911.06
$
1.620.80
SES200 277/480F
3 Phase, 277/480V, 4W+G, 200kA / Phase, with F' r
i
2,114.00
$
1.191.20
SES200 277/4805
3 Phase, 277/480V, 4W+G, 200kA / Phase, with Counter
S
2,163.00
$
1,730.40.
SES200 277/4800
3 Phase, 277/480V, 4W+G, 200kA / Phase, with Fiber 3 Surge_ Counter
S
2,366.00
S
1,A92.a0
SES200 2400
3 Phase. 240V Debs, 3W+G, 200kA / Phase
$
1,007.00
$
1,349.60
SES200 240OF
3 Phase, 240V Debs, 3W+G, 200kA / Phase, with Fiber
$
1,890.00
$
1,512.00
SES200 2400S
3 Phase, 240V Delta, 3W+G, 200kA / Phase, with Surge Counter
S
1,939.00
$
1,551.20
SES200 2400C
3 Phase, 240V Delta, 3W+G, 200kA /Phase, With Fiber & Surge Counter
S
2,142.00
$
1,713.60
SEP400 Panel Series
SEP400 1201208 13 Phase, 120/208V, 4W+G, 400kA /Phase $ 5,852.00 S 4,681.60
SEP400 277MBO 13 Phase 277/480V, 4W+G, 400kA / Phase $ 5,852.00 1 $ 4,681.60
All te/elcommunications and non panel application products come with a 5 year warranty
Pnwpr Pnotantien
SPS65120
1 Phase, 120V, 2W+G 65kA / Phase
$
190.00
$
152.00
SPS661201240
Split Phase, 120240V, 3W+G, WkA ! Phase
S
200.00.
$
140.00
SPS66 220 -
1 Phase. 220V, 2W+G 65PA / Phase
$
190.00
$
152.00
BPS FP
Flush MMM Plate
$
42.00
$
33.50
CHP100
Split Phase, 120240V, 3W+G, 40kA /Phase, 4 x Phone, 2 x CAN
S
390.00
$
312A
CHP100 FCP
Mud Box 3 Flush Mounti 21Plate for RU Wall Cavities
f
80.00
$
44.00
TDS YT 120
1 Mode MOVTEC, T10 -150V, 100kA, 5 LED Status
$
413.00
$
330A0
TDS YT 277
1 Mode MOVTEC, 220.277V, 100kA,'5 LED Status
$
413.00
$
310x40
TDS YT 480
1 Mode MOVTEC, 346-480V, 80kA, 5 LED Status
$
413.00
$
33040
T9F3A 120V
1 Phase, 120VAC/DC, 2W+G. 3A, L-1, L -G, N -Ci 50kA OIN
$
145.00
$
114.00
TDF3A 240V
1 Phase, 240VAC/DC, 2W+G, 3A, L -N, L -G, N.G. SMA DIN , le
S
145.00
$
114.00
TDF10A 120V
1 Phase.120VAC/W. 2W+G 10A. L -N. L -G, N -G. 50kA DIN Mft
$
ti0.00
128.00
TDF10A 240V
1 Phase. 240VAC/DC, ,104, L -N, L.G. N -G bOkA DIN
$
140.00
$
128.00
TOFZOA 120V
1 Phase. 12WA= 2W+G. 204, L -N, L -G, N.G, W DIN
S
180.001$
144.00
TDF20A 240V
1 Phase, 240VAC/DC, 2W+G, 20A, L -N, L -G, N -G. 50kA DIN
$
180.00
$
144.00
11,
20
1 Phase, 12W. 2W+G, L -N, L -G, Nita SOM
$
106.00
$
44.00
TDS50120240'
1 Phase, 1201240V 3W+G, L -N, L N.G, 500A
$
140.00
$
12440
TDS50.240
1 Phase, 240V, 2W+G, L -N, L -G. N -G, 50kA
$
105.00
$
44.00
TDS SC
Counter Unit With CT Inclusive
$
150.00
$
144.00 .
DAR 275V
Form C Roby Unit, 90V 275VAC. 4W Insulation For Use With TDFf S50
$
70.00
$
54.00
DW M 30V
1 Phase. 3W 6A SPD Filter. u4abis F 12Q4V DC
$
90.00
$
72.00
SL-40Ka 277
1277 volt W pole SPD 40ka peak 2 wire + gLW
Is
40.00
$
44.00
SL40Ka 480
1480 Volt rGht pole SPD 40ks '2 wire + 9W4
$
40.00
S
64.09
Omega. Power
Coefi OutW 8NAPs 11
Price Ust May 1, 2002
1-561,-8974NM
1-561-987-2801 fax
02— 955
2
Telecommunication_ Sienal_ and Data
S-PD825
25 Pair Punch down block ( a
s
145.00
:
676A0
SLP1 RJ11
RJ11 TelephonsiModern Protoctor,10M SWISS (UL Listed)
$
42A0
$
33.60
RJBX 15
RJ45 4, 6 or 8 Pin Jacks up to 1 (omega powlor)
f
116.00
$
.OQ
RJSX33
R345 4, 6 or 8 Pin Jacks .. to 33Vpk (omap power)
$
115.00
$
82A0
RJBX-63
RJ45 4, 6 or 8 Pin Jacks "up to 53Vpk (omega power)
$
115.00
$
62.00
RJBX-140
IRJ45 4, 6 or 8 Pin Jacks u .to 14OVpk (omega power)
Is
116A,I$
78-100VpK
93.00
UTB 9
0-7VPk. DIN Prof e, , 1.5A Load Current R
s
86AO
s
Y.00
UTS 18
7-14VPk.
DIN Profde, 20kA Ms. 1.5A Load Current
S
86.{p
$
11.00
UTS 36
14-28Vpk,
DIN Proft, 2OkA &20ps. 1.5A Load Currant (UR)
$
06.00
$
"A
UTB 72
28.50Vpk, DINProft2MA 8/20 , 206m Load Current R
$
85.00
s
#8.00
UTB 100
-r<1-7$Vpk.
DIN Profit, 2OkA &20ps, 2WmA Load Current
;
$COO
s
1si.00
UTB 140
78-100VpK
DIN PrMfile, 20kA WOps, 200mA Load Cement UR
;
86.00
$
10.00
UTB 200
100-155Vpk,
INN Profile. 2pkA &*Opi, 200mA LoaO Current R)
;
58.00 ;
;
UTS S
TelephonaModern
.Protector, 20kA 8/2
$
70.00
s
am
UTB T
Tale
Protector, 10kA 8/20 s (UR)
$
70.00
$
86.00
LSP10 9
10 Line, 9V Clamping, 10kA 8/20ps, 11 OmA Load Curren
s
168.00
i
134AO
LSP1018
10 Line, 18V n , 1 OkA Ms, 11OniA'Load Curren
$
188.00
f
134AO
LSP10 36
10 Lino, 36V C lOkA.20s,i 10mA Lao Current
f
188.00,
i
134.10
LSP10 72
10 Una, 72V Clamping, 1 OkA 820 s, 11 OmA Load Current
f
MOD
$
134A0.
LSP10100
10 Une, 100V Clamp n , 10kA WAps. 110mA Load Current
i
188.00
$
134.0
LSP12 301
12 Line, 30V in , 10kA s, 2A Load Current
$
168.00
$
134A0
s
DEP RS232 9 9
RS232I423, D89 Connector, 9 Wir4a Protected, 15V Ciamping
s
70.00
$
66.00
DEP RS232 25 9
RS232J423, DB25 Connector, 9 Wim Protected, 15VClarMingi
i
98.00
i
78,40
DEP RS232 25 25
DEP RS232 25 25 RS232/423, D1325 Connector, 25 Wires Protected, 15V Chu
s
112.00
$
W.60.
DEP R8422 9 9
RS4221485, D89 Connector, 9 Wires. Profected, 9V Clamp'
$
70.00
$
am
s
LAN RJ45 ILAN RJ45, I 008 T, Cat 0 Protector $ 140.00 s 1 MOO
LAN RJ45 MRS ILAN ". IW Rads Mounting Rail 1 $ 47.601S 38.08
i
LCP 01A ILoad Cell Protector, 4 or 6 Wire , 30V Clamping IS 224.001$ 17930
i
MGA TESTER Portable MOV and Gas Arrestor Tester Unit $ 1,044.00 1 $ 83830
s
CSP BNC 90
SM. 90V Clarrrp, 3GHz, 50 ohms, 20kA
s
91.00:
S
72.80
CSP BNC 600
BNC. 600V Oamp, M3GHz. 50 ohms 20kA W20ps
i
91.00
i
72.80
CSP NB 90
NF to NF Sulklwo, 90V Clamp, DC3GH2, $9 ohms. 20M
;
61.00
t
T2.80'
CSP NB 600
NF to NF BuNkhead..600V C , OC3GFtz, 50 ohms '20kA
f
91.00
s
73.80
CSP NMF 90
NM to NF, 90V ClaMP. DC3GHz, 50 ohms, 2OkA 8/2
$
91.001S
i
72.60
CSP NMF 600
IMM to NF. 8WV 0jamp. DC-30Hz, 50 ohm$, 70kA
S
91.00
s
7180
i
OSP 7A• 0460
7/16F &*Read to 7/16F Connector. 400.480 MHZ band
s
182.00
S
146.10
OSP 7A 0889
7/16F ftWwW to 7/16F Connector 1305.915 MHz bend
s
182.00
;
146A
OSP 7A 1920
7/16F Bul dwad to 7/16F Co�,1.8-2.0 GHz band
$
182.00
$
1460
OSP NA 0460
NF Su6khead to NF.Connector, 400.480 band
$
112A0
S
89.80
OSP NA 0889 '
NF BuWwad to 111E Conne0or,,a.95415 MHx band
i
112.00
i
89.80
OSP NA'1920NF
Sukhead to NF Connkictor, 1.8.2.0 Elis band
$
112.00
s
no
Omega Power
Confidential SNAPS it 1-S6�t-87-0663
Price List May 1, 2002 1-567-887.2801 fax
02- 955 3
ERICU'
ERICO, INC.
5693 SHOAL CREEK LANE
BOYNTON BEACH, FLORIDA 33437
October 1, 2001 PHONE: 81)a413a378 x-3711
FAX: 561-734-7M
Frank Dlouhy E-MAIL: SOREENFIELD@ERICO.COM
President
Omega Power Systems, Inc.
407 Hastings Street
Boca Raton, FL 33487
Re: Erico, Inc. Sole Source Designation
Dear Frank;
We would like to welcome Omega Power Systems, Inc. to the Edco, Inc. family. We
are very pleased to announce that on October 1, 2001, Omega Power became the
exclusive Florida Master Distributor for the complete line of surge suppression products
manufactured by ERICO®, Inc. Since 1903, Erico has led the electrical protection
industry in quality and innovation with products like CADWELe, ERITEC®, and now,
CRITEC .
We are proud to be associated with Omega Power and we look forward to serving you
and your clients with our patented TD Technology, enhanced surge protection product
line called Crites .
Any questions may be directed to my office at ( 800-813-3378 X-2711 ).
Sincerely,
sl!�" oWd
Steve Greenfield
Region Manager
Erico, Inc.
02- 955
. SECTION 16709
TRANSIENT VOLTAGE SURGE SUPPRESSION
PART 1 GENERAL
1.01 DESCRIPTION:
A. This section describes the materials and installation requirements for Transient Voltage Surge
Suppressors (TVSS's, also know as Surge Protective Devices, SPD's) as shown on the
drawings and herein specified.
1.02 RELATED SECTIONS:
A. General Electrical Requirements.
B. Basic Electrical Materials and Methods.
C. Building Wire and cable.
.-Leo
D. Switchboards.
E. Panelboards.
1.03 REFERENCES:
A. IEEE C62.41-1991 and C62.45-1992.
B. National Electrical Manufacturers Association (NEMA LSI).
C. National Fire Protection Association (NFPA 70).
D. Underwriters' Laboratories (UL 1449 and 1283).
1.04 SUBMITTALS:
A. Submit shop drawings for equipment and component devices under provisions of Section
I I
B. For each TVSS device indicated:
1. Product Data Sheets in NEMA LS -I format - Publication for Low Voltage Surge
Protection Devices (SPDs).
2. Installation and Operating Instructions.
3. UL 1449 Edition 2 Listing Certificate.
4. UL 1449 Edition 2 Suppressed Voltage Ratings.
5. Let -through voltage test results to ANSI IEEE C62.41 Cat A3 Ringwave, B3 and C3
Combination waves.
6. Independent test report showing product meets manufactures claimed single shot surge
rating.
1.05 MANUFACTURER'S QUALIFICATIONS.-
A.
UALIFICATIONS:A. Manufacturers shall be IS09000 certified.
B. Manufacturers shall have been engaged in the design and manufacturing of such devices for at
least ten (10) years.
C. The following manufacturers will be approved, provided they meet all specifications:
1. ERICO Inc.
2. Other manufacturers approved by engineering in writing 10 days prior to bid date of
prgjw.
02" 955
Jan 2r 2002. Maw 1.0 Pape 1 of 1 CRrrEC TDX Series Guide city of Miami RIVERSIDE Ctr 062902
1.06 WARRANTY:
A. The manufacturer shall warrant the TVSS against defects in material and workmanship for period
of 10 years.
B. "Acts of Nature" or similar statements typically exclude warranty claims resulting from lightning
damage. Since the TVSS's shall be exposed to such threats, any product with such warranties
shall not be WceQted. Only products with wan -antics that include replacement due to abnormal
over -voltage, excess surge or lightning current and product aging (due to excessive transient
activity) shall be accepted.
PART 2 PRODUCTS:
2.0.1 GENERAL REQUIREMENTS:
A. SPD shall be listed to UL 1449 Edition 2, cUL and UL 1283.
B. SPD shall protect all modes. SPD shall include L -N, L -G and N -G modes of protection.
C. Independent certification shall be provided proving that the TVSS meets the required 8/201is
per phase single shot surge rating, without failure of any fusing, disconnects or surge module.
Bypassing of any fusing/disconnects for purpose of this test is not acceptable.
D. Each mode of the TVSS shall be rated to exceed the life cycle testing of ANSMEEE C62.45 by
withstanding a test of at least 10,000 operations at 3kA 8/20µs without failure.
E. TVSS shall be Listed for application on systems with short circuit fault currents of up to 65
kAIC. Default UL 1449 IOkAIC compliance is not acceptable.
F. TVSS shall be capable of withstanding multiple temporary over -voltage per UL 1449 Ed 2
Section 36 & 37 without failure or need to reset or replace modules/fuses.
G. Multiple MOVs per mode shall be used, each with individual thermal disconnect devices
bonded directly to the MOV substrate for rapid and automatic disconnection of any MOV
exhibiting excessive temperature. The following are not acceptable:
1. TVSS's without thermal fuses/disconnects.
2. TVSS's with shared thermal devices that disconnect more than one MOV.
H. Enclosure shall:
1. Feature all metal NEMA 4 enclosure suitable for outdoor usage.
2. TVSS depth shall be less than 3.5" to allow mounting within wall cavity with optional
flush mount kit.
3. TVSS width shall be less than 5" to enable installation between adjacent electrical
enclosures.
02- 955
Jan 26°i 2002. bas 1.0 Pape 2 of 2 CRrrEC TDx Scrim Guide City of OWN RIVERSIDE Or 02002
2.02 SERVICE ENTRANCES - TYPE I :
TVSS shall be installed at all AC service entrances of each building and/or as shown on the drawings.
A. TVSS shall incorporate 150kA 8/20µs MOV protection per phase.
B. The status of the each individual mode of protection shall be separately monitored and
displayed via status LED. A reduction in capacity below the manufacturer's predetermined
level shall operate a Form C alarm contact and Audible Alar.
C. At least 35db @100kHz ENRWI shall be provided in L -N modes. (L -L for Delta power
systems). To avoid unsafe N -G leakage current, filtering shall not connect to ground.
D. Acceptable : ERICO TDX 150 meets these specifications.
2.03 DISTRIBUTION PANELS TYPE II :
TVSS shall be installed at distribution panels and/or as shown on drawings
A. TVSS shall incorporate 100kA 8/20µs MOV protection per phase.
B. The status of the each individual mode of protection shall be separately monitored and
displayed via status LED. A reduction in capacity below the manufacturer's predetermined
level shall operate a For C alarm contact and Audible Alar.
C. At least 25db @I OOkHz EMI/RFI shall be provided in L -N modes. (L -L for Delta power
systems). To avoid unsafe N -G leakage current, filtering shall not connect to ground.
D. Acceptable : ERICO TDX100 meets these specifications.
2.04 POINT — OF — USE TYPE III :
TVSS shall be installed at additional specific locations as shown on drawings. Distribution branch circuits that
feed equipment that generates electrical disturbances shall have additional TVSS protection to prevent this
noise feeding back onto other circuits. Additionally, these SPDs may be used where sensitive electronic
equipment is located more than 30' from the closest upstream TVSS.
A. TVSS shall provide 50kA 8/20µs surge rating per phase.
B. TVSS status for each phase shall be continuously monitored and displayed
C. At least 25db @I OOkHz EMI/RFI shall be provided in L -N modes. To avoid unsafe N -G
leakage current, filtering shall not connect to ground.
D. Acceptable : ERICO TDX50 meets these specifications
PART 3 EXECUTION:
3.01 INSTALLATION:
A. Install TVSS as indicated on Drawings, and in full accordance with manufacturer's written
instructions and comply with all applicable codes.
H. Units shall be installed with minimal connection lead length.
02- 9S5
An 2e 2002. Issue 1.0 Pape 3 of 3 CRITEC TDX Series Guide City of IWarni RNERSIDE Ctr 052002
TDX150 .
Detailed Specifications for ERICO's
Transient Discriminating Protection, TDX150 Series
&,pplications
Che ERICO TDX 150 Series of
Cransient Voltage Surge Suppressors
ire designed for critical protection
applications and specifically devel-
iped to provide long life even under
he most adverse conditions.
MICO's patented Transient
)iscriminatingT"(TDI') technology
xceeds the safety requirements of
IL 1449 Edition 2 and provides
uperior life by eliminating the
ommon failure experienced by
VSSs under abnormal or sustained
ver -voltages.
istallation is simplified by the
reconfigured connecting leads.
optimal protection is achieved by
)nnecting the TDX 150 nipple
rectly to the electrical panel to be
ntected. The unique narrow con -
ruction allows the TVSS to fit
stween adjacent panel boards and
mnect via a 90 -degree elbow.
The 150kA 8/rO—ps of surge protection
exceeds the proposed IEEE 062.41.2
Scenario I1 single shot surge rating
requirements for exposed service
entrance locations - Exposure 3.
The hybrid design incorporates an
efficient sine wave tracking filter,
which provides efficient noise attenua-
tion to ensure even the most sensitive
equipment is protected from noise
and transient activity.
The NEMA -4 weather tight housing
allows the TDX150 to be installed
indoors or outdoors. A flush mounting
kit is also available for installing the
TVSS within dry walls.
The TDX 150 is specified in full
compliance with NEMA LS 1 Low
Voltage Surge Protective Devices.
In addition, independent certified
surge test reports are.available.
Features
• 150kA 8/20ps protection for
service entrance and branch
distribution panels
• Transient Discriminating (TD)
technology for long service life.
Ideal for sites with poor voltage
regulation
• Three built-in safety features
include: TD technology, thermal
protection and over -current fusing
• UL 1449 Edition 2 listed
• All modes protected
• LED status indicator monitors the
integrity of the internal protection
for each mode of protection
• Form -C alarm contacts and audible
alarm
• NEMA -4 metal enclosure
• UL 1283 listed sine wave tracking
fitter
• 10 year free replacement limited
warranty
LZRICE7 0
vmmerico.con 2 - 9 5 5
Tr, "` 150 Series
icationS
Operation:
ydels available TDX150- 124/240
al system voltage (Vrms) 120/240
Distribution System IPh 3W+G
124m 277/480 347/600 120/240D 240D 480D t
120/208 220M 347/600 120/240 240 480
-127/220 -277/480
Rh Y 4W+G Rh Y 4W+G Rh Y 4W+G 3Ph A 4W+G 3Ph 0 3W+G Rh 0 3W+G
Rh Y 3W+G*
X. cont, operating voltage.
120/240V
Dimensions (W x D x L)
4.1" x 3.3" x 12" approx.
(Vrms)
170/340 170/295 310/536 480/830
170/400 275
528
Input frequency
50/60 Hz
Will
3ph Y 4W+G, 150kA 8/20ps TVSS protector
Protection:
Environmental rating
NEMA4
a
Operating temperature
Max. surge current / line
150kA 8/20ps
0-90% TEO Nor.OGY
Altitude
Protection modes
All modes protected via L -N, L -G and N -G (L -L & L -G for 3
wire Delta Units)
Test Standards:
SPD circuit description
MOV & TD technology with over -current and thermal fusing
cULus (UL 1449 Edition 2)
Short circuit current rating
65kAIC
ANSI/IEEE C62.41-1991 Cat A, Cat B, Cat C
Performance (L -N):
* For motor control
applications the 77)X150 480D is also applicable to "No Neutral" 480V Wre 3W+G systems.
Due to a policy of continual product development, specifications are subject to chaifge without notice.
2.41 Cat B3, RA 8/20ps /
6kV 1.2150µs
510V 510V 1050V 1640V
740V 710V
1250V
.41 Cat C3, IOkA 8/2011s /
20kV 1.2150ps
680V 710V 1240V 1520V
920V 970V
1440V
ine wave tracking filtering
45dB 45dB -35dB -30dB
45dB 45dB
-30dB
Alarms and Indicators:
Protection status indication
L -N, L -G & N -G status indication
Alarm contacts
Form -C, 400V 3A
Audible Alarm
Physical Data:
120/240V
Dimensions (W x D x L)
4.1" x 3.3" x 12" approx.
Weight
4.5 lb. approx.
Enclosure material
Connection means
Aluminum
#iOAWG, 24" flying leads
Mounting method
314" straight nipple
Will
3ph Y 4W+G, 150kA 8/20ps TVSS protector
Optional flush mounting plate for dr} +call
Environmental rating
NEMA4
a
Operating temperature
-40 to +176°F (40 to +80°C) TRANSIENT OISCRIMINATIHG
Humidity
0-90% TEO Nor.OGY
Altitude
0 - 12,OOOft (0 - 3650m)
Warranty
10 years
Test Standards:
Approvals
cULus (UL 1449 Edition 2)
UL 1283 (EMl/RFI filtering)
Surge rated to meet
ANSI/IEEE C62.41-1991 Cat A, Cat B, Cat C
C62.41.2 Scenario Il, Exposure 3
* For motor control
applications the 77)X150 480D is also applicable to "No Neutral" 480V Wre 3W+G systems.
Due to a policy of continual product development, specifications are subject to chaifge without notice.
tering Information
Part Number Description
TDX150 120/240
120/240V
1 ph 3W+G, l 50kA 8/20µs TV SS protector
TDX150 120/208
120/208V
3ph Y 4W+G, 15OkA 8/2Ops TVSS protector
TDX 150 277/480
277/480V
3ph Y 4W+G, 150kA 8/20ps TVSS protector
TDX150 347/600
347/600V
3ph Y 4W+G, 150kA 8/20ps TVSS protector
TDX150 120/240D
120/240V
3ph A 4W+G, High Leg Delta TVSS protector
TDX150 240D
240V
3ph,& 3W+/ -G, 15OkA 8/20µs TVSS protector
TDX 150 480D
480V
3ph NY 3W+/ -G, 150kA 8/20ps TVSS protector
TDX150 FP
Flush mounting plate accessory for dry wall applications
1: 1-440-248-0100 faux: 1.800.677.8131 Chic ph: 56-2.6Z44004 rax: 56-216244006
the 55-1 1-36214111 fax: 55-11.36214066 Mexico ph: 52-5-260.5991 fa)c 52-5.260.3310
IFRICO 0
www.erico.com
347%TOt M.xwx e¢0[It eaxeo. tie. rwf.e in u.&A
02- 955
i FACILITY CI�/TEC°
ELECTRICAL
PROTECTION
TDX100
Detailed Specifications for ER1CO's
Transient Discriminating Protection, TDX100 Series
Applications
The ERICO TDX 100 Series of
Transient Voltage Surge Suppressors
are designed for critical protection
applications and specifically devel-
oped to provide long life even under
the most adverse conditions.
ERICO's patented Transient
DiscriminatingT" (TDT") technology
exceeds the safety requirements of
UL 1449 Edition 2 and provides
superior life by eliminating the
common failure experienced by
TVSSs under abnormal or sustained
over -voltages.
Installation is simplified by the
preconfigured connecting leads.
Optimal protection is achieved by
connecting the TDX 100 nipple
directly to the electrical panel to
be protected. The unique narrow
construction allows the TVSS to fit
ietween adjacent panel boards and
connect via a 90 -degree elbow.
r
The 100kA 8/20ps of surge protection
meets the proposed IEEE C62.41.2
Scenario II single shot surge rating
requirements for exposed service
entrance locations - Exposure 3.
The hybrid design incorporates an
efficient sine wave tracking filter,
which provides efficient noise attenua-
tion to ensure even the most sensitive
equipment is protected from noise
and transient activity.
The NEMA -4 weather tight housing
allows the TDX 100 to be installed
indoors or outdoors. A flush mounting
kit is also available for installing the
TVSS within dry walls.
The TDX 100 is specified in full
compliance with NEMA IS 1 Low
Voltage Surge Protective Devices..
In addition, independent certified
surge test reports are available.
Features
• 100kA 8/20ps protection for
service entrance and branch
distribution panels
• Transient Discriminating (TD)
technology for long service life.
Ideal for sites with poor voltage
regulation
• Three built-in safety features
include: TD technology, thermal
protection and over -current fusing
• UL 1449 Edition 2 listed
• All modes protected
• LED status indicator monitors the
integrity of the internal protection
for each mode of protection
• Form -C alarm contacts and audible
alarm
• NEMA -4 metal enclosure
• UL 1283 listed sine wave tracking
filter
• 10 year free replacement limited
warranty
ISRICE7 0
www.erico.**r- 9 55
Specifications
Operation:
Models available TDX106- 126740
Nominal system voltage (Vrms) 120/240
Distribution System 1Ph 3W+G
TDX100 Series
1201208 277/480 347/600 120/240D 240D 490D
120/208 220/380 347/600 120/240 240 480
-1271220 -277/480
Rh Y 4W+G 31?h Y 4W+G 3Ph Y 4W+G 31?h A 4W+G 3Ph A 3W+G 3Ph A 3W+G
Rh Y 3W+G'
Max. cont. operating voltage (Vrms)
170/340 170/295 310/536 480/830 170/400 275 528
Input frequency
50/60 Hz
Protection:
3ph Y 4W+G, 100kA 8/20ps TVSS protector
Max. surge current / line
IOOkA 8/20ps
Protection modes
All modes protected via LN, L -G and N -G (L -L & L -G for 3 wire Delta Units)
SPD circuit description
MOV & TD technology with over -current and thermal fusing
Short circuit current rating
65kAIC
Performance (L -N):
C62.41 Cat B3, 3kA 8120ps 16kV 1.2150µc
480V 500V 1025V 1270V 750V 780V 1210V
C6241 Cat C3,10kA 8120µs 120kV 1250ps
690V 670V 1270V 1470V 895V 1060V 1400V
Sine wave tracking filtering
45dB _ 45dB -35dB -300 45dB 45dB -35dB
Alarms and Indicators:
Protection status indication
LN, L -G & N -G status indication
Alarm contacts
Foran -C, 400V 3A
Audible Alarm
Physical Data:
Dimensions (W x D x L)
4.1" x 3.3" x 8" approx.
Weight
3.5 Ib. approx.
Enclosure material
Aluminum
,
Connection means
#IOAWG, 24' flying leads
RAJ�
Mounting method
straight nipple
Optional
ional flush mounting plate for drywall
Environmental rating
NEMA -4 �+� TRANSIENT DISCRIMINATING
Operating temperature
40 to +176°F (40 to +80°C) TECHNOLOGY
Humidity
0-90%
Altitude
0 - 12,000ft (0 - 3650m)
Warranty
10 years
Test Standards:
Approvals
cULus (UL 1449 Edition 2)
UL 1283 (EMI/RFI filtering)
Surge rated to meet
ANSI/IEEE C62AI-1991 Cat A, Cat B, Cat C
C62.41.2 Scenario 11, Exposure 3
* For motor control applications the TDXI00 480D is also applicable to "No Neutral" 480V Wye 3W+G systems.
Due to a policy of continual product development, specifications are subject to change without notice.
Ordering Information
Part Number Description
TDX 100 120/240
TDX 100 1201208
TDX 100 277/480
TDX100 347/600
TDX 100 120/240D
TDX 100 240D
TDX 100 480D
TDX 100 FP
120/240V
1 ph 3W+G, 100kA 8/20ps TVSS protector
120/208V
3ph Y 4W+G, 100kA 8/20ps TVSS protector
277/480V
3ph Y 4W+G, 100kA 8/20ps TVSS protector
347/600V
3ph Y 4W+G, 100kA 8/20ps TVSS protector
120/240V
3ph A 4W+G, High Leg Delta, TVSS protector
240V
3ph A 3W+/ -G, 100kA 8/20ps TVSS protector
480V
3ph AN 3W+/ -G, 100kA 8/20µs TVSS protector
Flush mounting plate accessory for dry wall applications
USA ph: 1.440248.0100 fax: 1-800-677.8131 Chile ph: 56-2-6244004 hx 56-2-624-4006
Brazil ph: 55.11-36214111 fax: 5571.1-36214066 Mexico ph: 52-5.2605991 fax: 52-5-260-3310
02- 955
ERIC13
www.erico.com
E376S S476LToi 003.3M2 02002 ER100. M¢. Pn40 in U.S.A.
FACILITY I=RPrEl=°
ELECTRICAL
PROTECTION
TDX50
Detailed Specifications for ERICO's
Transient Discriminating Protection, TDX50 Series
Applications
the ERICO TDX50 Series of
Transient Voltage Surge Suppressors
for equipment, panel and motor pro-
tection applications are specifically
designed to provide long life, even
under the most adverse over -voltage
conditions.
ERICO's patented Transient
Discriminatine (TDr") technology
exceeds the safety requirements
of UL 1449 Edition 2 and provides
superior life by eliminating the
common failure experienced by
TVSSs under abnormal or sustained
over -voltages.
The 50kA 8/20ps of surge protection
meets the proposed IEEE C62.41.2
Scenario II single shot surge rating
requirements for service entrance
locations, Exposure 2.
r
The hybrid design incorporates an
efficient sine wave tracking filter,
which provides efficient noise attenu-
ation to ensure even the most sensitive
equipment is protected from noise
and transient activity.
The NEMA -4 weather tight housing
allows the TDX50 to be installed out-
doors making it well suited to such
applications as well/sump pumps. A
flush mounting kit is also available
for installing the TVSS in drywall
applications.
The TDX50 is specified in full com-
pliance with NEMA LS 1 Low
Voltage Surge Protection Devices.
In addition, independent certified
surge test reports are available.
Features
• 50kA 8/20µs protection for service
entrance and branch distribution
panels
• Transient Discriminating (TD)
technology for long service life.
Ideal for sites with poor voltage
regulation
• Three built-in safety features
include: TD technology, thermal
protection and over -current fusing
• UL 1449 Edition 2 listed
• All modes protected
• Status indication to monitor the
integrity of the internal protection
for each phase
• NEMA -4 metal enclosure
• UL 1283 listed sine wave tracking
filter
•
10 year free replacement limited
wananty
CRDWEL17 CRI TEC " ERI TECH''
WELDED ELECTRICAL CONNECTIONS SURGE PROTECTION DEVICES LIGHTNING PROTECTION/GROUNDING
r
TDX50 Series
Specifications
Operation:
Models available TDXS0- 120 240 120240 120208
Nominal system voltage (Vrms) 110-120 220-240 120/240 120/208
-127/220
Distribution system 1Ph 2W+G IPh 2W+G IPh 3W+G 31?h Y 4W+G
Max. cont. operating voltage (Vrms) 170 275 170/340 170/295
Input frequency 50/60 Hz
Protection:
Max. surge current / line 50kA 8/20ps
Protection modes All modes protected via L -N, L -G and N -G
SPD circuit description MOV & TD technology with over -current and thermal fusing
Short circuit current rating 65kAIC
Performance (L -N):
347/600
C62.41 Cat 133, RA 8/20µs / 6kV 1.250µs
510V 920V 540V
C62.41 Cat C3, l OkA 8/20ps / 20kV 1.2/50µs
740V 1031V 690V
Sine wave tracking filtering
-35dB -35d13 -35dB
Alarms and Indicators:
Aluminum
Protection status indication
Visual - per phase
Physical Data:
347/600
Dimensions (W x D)
4.1" x 2.5"
Length
4" 4" 4"
Weight
2 lb. approx.
Enclosure material
Aluminum
Connection means
#IOAWG, 24" flying leads
Mounting method
3/4" straight nipple
Optional flush mounting plate for -dry wall
Environmental rating
NEMA -4
Operating temperature
40 to +176°F_L40 to +80°C)
Humidity
0-90%
Altitude
0 - 12,000 ft (0 - 3650m)
Warranty
10 years
Test Standards:
Approvals
cULus (UL 1449 Edition 2)
UL 1283 (EMI/RFI filtering)
Surge rated to meet
ANSI/IEEE C62.41-1991 Cat A, Cat B, Cat C
C62.41.2 Scenario 11, Exposure 2
277/480
347/600
220/380
347/600
-277/480
-25dB
Rh Y 4W+G
Rh Y 4W+G
31?h Y 3W+G*
310/536
480/830
560V
1430V
770V
1990V
-35d8
-25dB
6"
6"
1420V
1660V
-25dB
6'
TRANSIENT DISCIUMINATING
TECHNOLOGY
* For motor control applications the TDX50 277/480 is also applicable to "No Neutral' 480V lie 3W+G systems.
Due to a policy of contuuud product development, specifications are subject to change without notice.
Ordering Information
Ism
Part Number Description
TDX50 120
TDX50 240
TDX50 120/240
TDX50 120/208
TDX50 277/480
TDX50 347/600
TDX50 FPI
TDX50 FP3
110-120V Iph 2W+G, 50kA 8/20µs TVSS protector
220-240V 1 ph 2W+G, 50kA 8/20ps TVSS protector
120/240V 1 ph 3W+G, 50kA 8/20ps TVSS protector
120/208V 3ph Y 4W+G, 50kA 8/20ps TVSS protector
277/480V 3ph Y 3/4W+G, 50kA 8/20µs TVSS protector
347/600V 3ph Y 4W+G, 50kA 8/20ps TVSS protector
Single phase flush mounting plate accessory
Three phase flush mounting plate accessory
USA ph: 1-440.249-0100 tax: 1-E00b77-8131 Chile ph: S6.2a244004 fax: S6-2.6244006
Brazil ph: 55-11-3621-4111 fax: S5-11-36214066 Mexico ph: 52-5260.5991 fax: 52-5.260-3310
02-- 955
LZRIC0
•
www.edco.com
Ea7SS S47%T01 0U3W 0200¢ ENW, 1W- wird in US.A
r
Service Entrance TVSS Protection
Detailed Specifications for ERICO's
Service Entrance Standard Protection, SES200-Series
APPLICATIONS
The ERICO SES200-Series of Transient
Voltage Surge Suppressors is designed
to deliver specification grade perfor-
mance and features at an affordable
price. The versatile and compact
design provides high quality protection
fora wide variety of commercial and
industrial applications where sensitive
electronic equipment is to be protected
The SES200 provides a service life
equivalent to up to 200kA 8/20µs per
line of surge material, making it ideal for
the protection of service entrance
panels and ensuring a long operational
life under severe lightning conditions.
Internal electronics continuously
monitor SPD protection, and the status
of each mode of protection is displayed
on a 5 segment LED bar graph An
alarm contact for remote monitoring is a
andard Wurc,
The replaceable surge modules provide
protection to L -N and N -G modes, ensuring
effective protection from both common
mode and differential transients.
ERICO develops and supplies quality
lightning and surge protection solutions.
The SES200 Series utilizes Transient
Discriminatingrm (TDTM) technology, which
meets the safety standards of UL 1449
Edition 2 and provides a superior life by
eliminating the common temporary over -
voltage failure mode ofmost SPDs.
The SES is designed to mount adjacent to
the service entrance panel with connection
being made via a small length of conduit.
FEATURES
•
200kAS/20gs primaryprotection for
service entrance panel applications
• NEMA-4Xenclosure
• Internal high interupt capacity fusing
for added safety
• Modular design allows easy
replacement of surge modules
• Transient Discriminating (TD)
technology for long service life. Ideal
for sites with poor voltage regulation
• Combination MOV & SAD protection
• 5 segment LED status indicator
monitors the integrity of the internal
protection for each mode
• 5 year limited warranty
• Optional EMIWI Filter and Surge
Counter
CROWELD" CRtTEC w &"R/TECH a Mi1f.�IbVJC1VS A (-jO&F 4W. UACEF6C,TFC-K,REfYiiS liHrwOcs tl1�'Cn�GJQ(H'-'i*G
I 1
Service Entry ce Standard Protectit. I SES200-Series
SPECIFICATIONS
Operation:
Models available: SES200
Nominal system voltage (Vrms)
Distribution system
Max. continuous operating voltage L -N, LG, N -G
Max. permissible abnormal over -voltage GN, IQ N -G
Input frequency
Protection":
Surge material per line (8/20µs)
L -N
N -G
Protection modes
SPD circuit description
Fusing characteristics
Performance IrN:
SVR UL 1449, 2nd Edition
ANSI/IEEE C62.41 Cat. B3 - 3kA, 8/20µs
Cat. C3 - IOkA, 8/20µs
Alarms and Indicators:
Status indication
Options:
EMI/RFI Filter
SurgeCounter
Physical Data:
Dimensions (W x H x D)
Weight
Enclosure material
Connection means
Environmental rating
Operating temperature
Humidity
Altitude
Warranty
Test Standards:
ORDERING INFORMATION
120/240
120208
271/480
240D
120240
120/208
220/380
240
SES200 240D
127/220
230/400
Suffix -F adds optional EMI/RFI Filter
.................... -S
Suffix -S adds optional SurgeCounter
277/480
Suffix -C adds Combination of options F & S
1 Ph 3 W+G
3Ph 4W+G
3Ph 4 W+G
3Ph 3W & 3 W+G Delta
170V
170V
400V
400V L -L
240V
240V
480V
480V L•L
50/60 Hz
200/I OOkA
200/100kA
200/100kA
L-NandN - G
Parallel hybrid with 7D technology
200 kAIC, 100kA 8/20µs per line
400V 400V 700V
<450V <450V <1000V
<550V <550V <1800V
5 segment LED bar graph per protection mode
Dry contact for remote monitoring
Fuse failure indication
40c B attenuation cr 100kHz
300A 8/20µs threshold, non resetable
Approx. 11 x 16 x T' (280 x 406 x 180mm)
18 lb
Polycarbonate
# 12 - #2 AWG wiring terminals
NEMA4X Indoor use
+14 to +140°F (40 to +60°C)
0-90•/a
0 - 12,000 ft (0 - 3650m)
5 years
L -L
700V
<1000V
<1800V
_
Listing UL 1449 Edition 2
Independent Certification
Surge rated to meet ANSVIEEE C62.41-1991 Cat A, Cat B & Cat C
Proposed 2001 Scenario II, Expsoure 3
*Surge ratingsare quoted "Aggregate MOV material/NEMA LSI tested rating"
Due to a pokey ofeontinual product development, spec fwations
are subject to change without notice.
USA ph: 1-440-248-0100 fax 1440-519.1675
9razii ph: 5511-3261-4111 fax 55-11-3261-0066
Part Number
Description
SES200120/240
120/240V 1 phase, 3W+G, 200kA 8/20µs SPD
SES200 120/208
120/208V 3 phase, 200kA 8/20Ns SPD
SES200 277/480
277/480V 3 phase, 200kA 8/20µs SPD.
SES200 240D
240V Grounded & Ungrounded Delta SPD
.................... -F
Suffix -F adds optional EMI/RFI Filter
.................... -S
Suffix -S adds optional SurgeCounter
.................... -C
Suffix -C adds Combination of options F & S
Chile ph: 56-2-734-5022 fax 56-2-736-9726
Mexico ph: 52-5-260-5991 fax 52-5-260-3310
ERICO's coordinated approach to facility protection - CADWELD, CR/TEC, ER/TECH
V7 - Updales 527W 02
955 www erico.com
02001 ERICO, Inc. Printed in USA
Process Control TVSS Protection
T
E
0
t:
m
A
C
i
_j
,00aac��00000���o
5.66" (144mm)
Detailed Specifications for ERICO's
Transient Discriminat-ing Filter, TDF -10A -Series
N
APPLICATIONS
Lightning transients and surges are a
major cause of expensive electronic
equipment failure and business
disruption. Damage may result in loss
of computers, data and communica-
tions, loss of revenue, and loss of
profits. The new Transient Discriminat-
mgm filterfamily ofTVSS devices offer
economical and reliable protection from
power transients with the convenience
of easy installation on 35mm DIN rail
mountings.
The TDF series has been specifically
designed for process control applica-
tions to protect the switched mode
power supply units on devices such as
PLC controllers, SCADA systems and
motor controllers. Units are available
for 3A, l0A and 20A loads and in a
range of clamping voltages including
30V, 150Vand275V.
The range is intended for use in conjunc-
tion with ERICO's Universal Transient
Barriers UTBs to provide a coordinated
approach to protection of both the power
and data control circuits.
The TDF is a series connected single
phase surge filter providing an aggregate
surge capacity of 50kA (8/20ps) across
L -N, L -G and N -G. The space efficient low
pass filter, provides some 65dB of attenua-
tion to voltage transients. Not only does
this reduce the residual let -through
voltage, but it helps further reduce the
steep rates of rise of voltage and current
providing superior protection for sensitive
electronic equipment.
FEATURES
• Compact design fits into most distribution
panels and motor control centers
• High efficiency sine wave filtering - ideal
for the protection of switched mode
power supplies
• Three modes protected L -N, L -G & N -G
• 35mm DINrail mount -DIN43 880profile
matches common MCBs
• LED indication and opto-isolated output
for remote status monitoring
• Transient Discriminating technology
ensures safe operation during abnormal
over -voltage events
• UL 1449 Edition 2 recognized
• Large 50kA / line surge capacity provides
a high level of protection and long
opm iooal life
• 5 year limited warranty
ERIC- t I_ 0
Transient C Tocriminating Filter, Tr 1 -10A -Series
SPECIFICATIONS
nwr
(A1
-10
--••—� ._,rte
W— .. L.... w..,
Operation:
Models available
Nominal line voltage
Max. continuous operating voltage
Maximum load current
Input frequency
Earth leakage current
Protection:
Max. aggregate surge rating
Protection modes
Max. surge current / mode L -N
L -G
N -G
SPD circuit description
Filter:
OUTM Inductor
PAW) Capacitor type
N Attenuation @IOOkHz L -N
Performance:
Let -through 500A, 8/201is
IEEE C62.41 Cat. B3 - 500A ringwave
G Cat. C 1 - RA, 8/20µs
Alarms and Indicators:
Protection status indication
Physical Data:
Dimensions (W x D x H)
Weight
Enclosure material
Connection means
Wire size
Mounting method
Enclosure style
Environmental rating
Operating temperature
Humidity
L - N (dB) Surface finish
Warranty
Test Standards:
Approvals
2,000 Surge rated to meet
-60
-70
Mr—J
1 10 100 1,000
Frequency (kHz)
ORDERING INFORMATION
TDF -I OA -120V
120VAC / 125VDC
17OVnns
l0A
50/60Hz
<0.2mA
TDF -I OA -240V
240VAC
34OVrms
50kA 8/20µs
L -N, L -G and N -G
20kA 8/20µs
2OkA 8/20µs
IOkA 8/20µs
Transient Discriminating technology
Thermal fusing
Series low pass LC sine
wave tracking filter
Ferrite cored
X & Y grade interference suppression
65dB
L -N
L -N
330V
500V
22V
28V
262V
481V
Red LED, On = OK Opto-isolated output
5.62" x 3.46" x 2.76" (144 x 88 x 70mm) approx.
2.41b approx.
Flame retardant UL94V-0
Screw terminals
#IOAWG to #18 AWG
DIN T35 nil
DIN 43880
NEMA -1
-22 to +131'F 00 to +55°C)
0-90%
Spark eroded finish
5 years
UL 1449 Ed 2, UL 1283 recognized, CSA222
ANSI/IEEE C62.41-1991 Cat A, Cat B, Cat C
Due to a policy ojcontinual product development, specifications
are subject to change without notice.
Part Number Description
TDF 10A 120V 120V 1 phase, 50kA 8120µs, I OA series TVSS protector
TDF -10A 240V 240V 1 phase, 50kA 8120ps,10A series TVSS protector
02- 955
USA ph: 1-440-248-0100 fax 1-440-519-1675 Chile ph: 56-2-734-5022 fax: 56-2-736-9726 ERItQ'
Brazil ph: 55-11-261 -0111 fax: 55-11-261-0066 Mexico ph: 52-5-39&W33 fax 52-5-397-8634
ERICO's coordinated approach to facility protection - CADWELD, CRITEC, ER/TECH www.edco.com
U229S GS418LT99 9125M9 01999 ERICO, Inc. Printed in U.SA
Telecommunications Line Protection
Detailed Specifications for ERICO's
Subscriber Line Protector, SLP1-RJ11
APPLICATIONS
Lightning transients and surges are a
major cause of expensive electronic
equipment failure and business
disruption. Damage may result in loss
of computers, data and communica-
tions, loss of revenue, and loss of
profits. The new CRITEC SLP I -RJ I l
is designed to protect sensitive tele-
communication equipment from
transients and surges present on the
telecommunication network
Designed for telephonelmodem
systems with nominal 48 Vdc plus AC
ring, applications include the protec-
tion of :
• Industrial modems
• Point-of-sale equipment
• Vending machines
• Fax machines
• Security Systems, Fite Alarms and
other dial-up modems
In addition to over -voltage protection, the
unit features solid state resettable fuses
that provide automatic over -current
protection, mitigating sneak, fault currents
and mains incursion.
Together with power protection, the SLP I -
RJI I provides ground potential equaliza-
tion between power and telecommunica-
tions services ensuring that ground
potential voltage stresses are not placed
across internal equipment - a common
cause of equipment damage during
lightning activity.
For hardwired applications, CRTTECs
UTB-T offers a screw terminal DIN rail
mount version of the SLP 1 -RJ 11
FEATURES
• Simple plug-in connection for 4 or 6
position RJ plugs
• 63" Patch Cord included
• Safe and reliable operation - UL 497A
Listed
• Line to Line and Line to Ground
protection
• Automatic over -current protection
• Required component for IEEE Std 1100
Single point grounding system
• 5 year limited warranty
CROWELD1 CMTEC , #ERITECH -
wilffi1�E11kli�llrOQ16_ A*CEfi<TIC-KM t4.AFWJ+l,'t7J1r<T1j��1,�f;1Uvf�. a- i I AW AN
02- 955
Subsd -1 `ber Line Protection, F" P -1 -RAI
SPECIFICATIONS
2 2
3
4
5
3
Operation:
Model
Maximum voltage L-1, L -G
Line current max.
Protection:
Shunt ova -voltage protection
Series ova-currat protection
Performance:
Let -through voltage T&R to Ground
4 Physical Data:
Environmental rating
Operating conditions
5 Enclosure style
Dimensions (L x W x H)
Weight
Connection ~I;erhod
GrourO, :..ead
Mounting
Patch Cord
Warranty
Test Standards:
Approvals
ORDERING INFORMATION
ceUS
SL.P1-RJ11
<280Vrms
160mA per line @ 77'F (25°C)
GDT (T&R to G), 350V
PTC, self -resetting PolySwitchTM
I l0VtyA T R (5kV, 125A 10/700µs)
500VtyA T&R to G (5kV, 125A 10/7001Ls)
NEMA -1
-40 to +150°F (40 to +65°C� 0-90% humidity
Flame retardant 94-V5A, glass reinforced
3.0" x 1.5" x 1.1" approx.
1.8 oz approx.
6 position RJ connector, 2 pins protected
6" # 18AWG with M4 ring lug
Adhesive backing
6 Position 4 wire, 6.5"
5 years
UL 497A listed, Secondary Telephone protection
Due to a policy of continual product development, specifications
are subject to change without notice.
Part Number Description
SLP1 RJ11 RJ11 Telephone Protector
PolySwitch is the registered trademark of Ra)chem
USA ph: 1440-248-0100 tax 1440-519-1675 Chile ph: 56-2-624-4004 fax 56-2-624.4006
Brazil ph 55-11-3261-4111 fax 55.11362140066 Mexilco ph: 52-5-260-5991 fax 52-5-260-3310
mum=
ERICO's coordinated approach to facility protection - CADWELD, CR/TEC, ERITECH www.edco.com
r
02- 9 5 9?w, Emw, .
RF Coaxial Protection
Detailed Specifications for ERICO's
Coaxial Surge Protectors, CSP -Series
APPLICATIONS
Lightning transients and surges are a
major cause of expensive electronic
equipment failure and business
disruption. Damage may result in the
loss of computers, data and communi-
cations equipment as well as the loss of
revenue and profits. ERICUs Coaxial
Surge Protector (CSP) family of surge
diverters, offer economical and reliable
protection from transients on coaxial
antenna RF feeder cables.
They are specifically designed to
protect wireless communications
equipment from lightning discharges,
NEW and other induced electro-
magnetic disturbances on coaxial
antenna feeders.
The device comprise a leadless gas
arrestor housed in a chrome plated .
brass block. Careful design and
precision machining has allowed the
matched between the characteristic
impedance of the unit and the cable to be
optimized. This attention to detail has
resulted in a unit capable of operating at
typical power and frequency levels of
30OW and 2GHz respectively, whilst
minimising the insertion and return losses.
Version with N, BNC or N bulkhead
connectors are available.
FEATURES
• Robust design
• Simple plug-in installation
• Models to suite N and BNC cable
terminations
• High impulse current rating
• Wide operating frequency spectrum
• Low insertion and return loss
• Precision matched plated enclomm
CE70WELD CRITEC ERITECH -' ■
WELDED ELECTRICAL CONNECTIONS SURGE PROTECTION DEVICES LIGHTNING PROTECTION GROUNDING
02- 955
Coax � Surge Protection, C( )-Series
SPECIFICATIONS
. operation:
Max. impulse discharge current
Max. AC discharge current (50Hz, 9 cycles)
Impulse life (10/1000ps 500A)
Characteristic impedance
Operating frequency
Maximium capacitance
Insulation resistance
Physical Data:
Environmental rating
Operating temperature
ORDERING INFORMATION
CSPA'X VVV..
XXX = connector type and termination
V V V =nominal breakdown voltage
To select the appropriate protection
voltage tree the following procedure:
1. Determine the transmitter power in
Watts (P)
2. Determine the VSWR, ifunsure use 1.5
3. Vpeak=VSWRx 1.4x (50P)
4. Choose the CSP with next voltage
above Vpeak
IOkA 8/20Ns
65A
400 times
50 ohms
DC - 3GHz typical
1.5pF
100M ohms
NEMA -1 (IP20)
+32 to +150°F (0 to +65°C)
0-900/a humidity
Approx. dimensions (W x H x L)
Connector Type
NMF
1.14" x 1.14" x 2.44" (29 x 29 x 62mm)
BNC
1.14" x 1.14" x 2.24" (29 x 29 x 57mm)
NB
1.14" x 1.14" x 2.64" (29 x 29 x 67mm)
NFF
1.14" x 1.14" x 2.32" (29 x 29 x 59mm)
Weight
1 oz (30g) approx.
Warranty
5 years
Due to a policy of continual product development, specifications
are subject to change without notice.
Part Number
Connector Type
V clamp
(100VIS)
V clamp
(100VAIIS)
CSP NMF 90
N -Type M to F
72-108V
450V
CSP NMF470
N -Type M to F
400-540V
800V
CSP BNC 90
BNC-Type M to F
72-108V
450V
CSP BNC 470
BNC-Type M to F
400-540V
800V
CSP NB 90
Bulkhead N -Type F to F
72-108V
450V
CSP NB 470
Bulkhead N -Type F to F
400-540V
800V
CSP NFF 90
N -Type F to F
72-108V
450V
CSP NFF 470
N -Type F to F
400-540V
800V
USA ph: 1.440-248-0100 fax: 1440-519-1675 Chile ph: 56-2-734-5022 fax:56-2-736-9726 �",Jffrca0
Brazil ph: 55-11-261-0111 fax 55-11-261-0066 Mexico ph: 52-5-398-0033 fax: 52-5-397-8634
ERICO's coordinated approach to facility protection - CADWELD, CR/TEC, ERITECH 02-
g erico.com
U159S GS418LT99 9125M9 01999 ERICO. Inc. Printed in U.S.A.
Data & Signal Line Protection
rn
7.74'
(106-wq •�`:;.�;.
o'
(+2—)
Detailed Specifications for ERICO's
Universal Transient Barrier, UTB-Series
APPLICATIONS
Industrial environments are prone to
dangerous and damaging transients
and surges which can be induced onto
signal lines as a result of lightning and
power switching. These surges and
transients can cause erroneous
equipment operation or corruption of
process controllers resulting in system
failure. Uncontrolled surges and
transients create danger in terms of
occupational health and safety and can
lead to expensive equipment repairs,
considerable production downtime,
loss of revenue and loss of profits.
CRITEC's UTB series provides tran-
sient protection for equipment from
surges induced onto balanced pair
signal lines and low voltage secondary
power supply systems connected to
industrial equipment. Industrial
equipment can include such systems as
prog umablo logic contmias (pbEs),
supervisiory and control and data
acquistion (SCADA) equipment, fire and
security alarms and industrial monitoring
and control equipment.
The UTB uses a hybrid, three stage
clamping circuit, to ensure the best
possible protection to sensitive electronic
equipment while maintaining a minimum of
line interference and insertion losses.
The primary stage consists of Gas Dis-
charge Tubes (GTD) designed to shunt the
bulk of the energy to ground. The second
stage employs Metal Oxide Varistor (MOV)
technology as a fast acting clamp to further
limit the residual let -through voltage to
levels typically less than 100V. The final
stage of protection sets the operating
voltage and ultimate let -through level of
the barrier by using extremely fast acting
Silicon Avalanche Diode (SAD)
technology.
FEATURES
• Efficient, three stage clamping circuit
technology ensures lowest possible
residual let -through voltage
• Over -voltage and self -resetting over -
current protection
• Robust design minimises the risk of
damage due to high Earth Potential
Rise(EPR)
• Models to suit balanced pair signal
lines operating at up to 8MHz
• Models to suit line currents up to 1.5A
• UTB-S for telephone / modem circuits
• Screw mounting assessory included
• Genuine 20kA 8/20ps surge rating
ensures high level protection and long
service life
• LaagS�wi��li�a
02-' 955
CROWELD CRITEC ERI TECH _ [A!�Xj
'WELDED ELECTRICAL CONNECT;ONS SURGE PROTECTION DEVICES LIGHTNING PROTECTIOWCROUNWf G
Univer 'iI Transient Barrier, L" 3 -Series
SPECIFICATIONS
CRITEC UTH
u wiw+..Nr.".. M
rr weir[ �o„era, na r.r..wr..r �
rar s mrra,o w.sur.w� nennr�wrr
UT8
CRITEC UiR
m e
9 A
UTS-s
Model
Typical
Max
Max
Leakage
UTB 36V damp 12mm DIN profile
L -L
Line
Working
Current
UTB 140
Conduction
Current
Voltage
@V.
UTB For telephone / modem
Voltage
(mA RMS)
L -L
@ 1mA
(V„)
UTB 9
9.5
1500
8.5
30
UTB 18
18
1500
16.0
2
UTB 36
36
1500
31.0
4
UTB 72
72
200
55.0
6
UTB 100
100
200
86.0
5
UTB 140
140
200
109
10
UTB 200
200
200
171
20
UTB S
N.A.
120
190
N.A.
ORDERING INFORMATION
Transient Protection:
Rated surge current
Over Current Protection:
Automatically resetable fuse
DC Loop Resistance:
UTB-9, 18, 36
UTB-72,100,140,200
UTB-S
Frequency Response:
UTB series
UTB-S series
Physical Data:
Operating temperature
Environmental rating
Enclosure style
Dimensions (W x D x H)
Weight
Enclosure material
Connection means
Warranty
Test Standards:
Surge rated to meet
20kA 8/20µc
PTC
Typically less than 0.7512
Typically less than 42Q
Typically less than 22Q
4MHz (3dB) @ ZR = 12052
8MHz (3dB) @ ZR = 6000
Suitable for E1/Tl type 2Mbit/s circuits
-4 to +140°F (-20 to +60°C) 0-90% humidity
NEMA -1 (IP20)
DIN 43880
0.47” x 3.46" x 2.75" (12 x 88 x 70mm) approx.
60g (2oz) approx.
Flame retardent UL94V-0
Accepts #22 to #IOAWG (up to 4mm2)
5 years
ANSUIEEE C62.41-1991 Cat A, Cat B & Cat C
ANSUIEEE C62.45-1987 Life cycle testing
AS/NZS 1768-1991 Cat A, CaLB & Cat C
BS 6651:1992 Cat A, Cat B
IEC801-5 Installation Class 5
Due to a policy of continual product development, specifications
are subject to change without notice.
Part Number Description
UTB 9
UTB 9V clamp 12mm DIN profile
UTB 18
UTB 18V damp 12mm DIN profile
UTB 36
UTB 36V damp 12mm DIN profile
UTB 72
UTB 72V damp 12mm DIN profile
UTB 100
UTB 100V damp 12mm DIN profile
UTB 140
UTB 140V damp 12mm DIN profile
UTB 200
UTB 200V damp 12mm DIN profile
UTB S
UTB For telephone / modem
USA ph: 1440-248-0100 fa)c 1440-519-1675 Chile ph: 56-2-734-5022 fax: 56-2-736-9726
Brazil ph: 55-11261-0111 fax: 55-11-261-0111 Mexico ph: 52-5-398.0033 fax: 52-5-397-8634
ERICO's coordinated approach to facility protection - CADVIELD, CRITEC, ERITECH � 5 edoo.com
U158S GS418LT99 9125M9 O 1999 ERICO, Inc. Printed in U.SA
S-PD825
Teleconnmuni tionallne Protection ------..-.--
The ser" S -PDM dwim is designed to protect vow grade teWicne Ones. ft Wriea modem lines or LSM
lines. This device Is intended for installation at the point of dwwcaticri dose to the building ground so as to
facilitate, ground wire connection to the same point as to building ground. -
This device is designed to protect up to twenty-five Ones. Connection is accomplished by punching the pairs down
as with 8 Standard punch down block making your Install on a breeze. A ground lug is provided an the side of
the unit to insure a low impedance ground discharge path.
The unique design of the S*W dmms nuke ram among to most versatile TVSS devices on to market with
perforrnance spa= that are superici, to our compeititors and a warranty ttiat is second to none.
GENERAL
Description: —terin— wired transient voltage surge suppresw with encapsulated Optimal Response
Network'" circuitry for pMtection of telecommunications circuits.
Application: Designed for use on Standard 3002-C2 unconditioned voice grade Ones, fax Ines, modem
Ines or ISDN Ines to protect all telecommunication system equipment from damaging
tcaoswits asnardlad outside that facifity an the Central Office cable.
Enclowre: —Metal bottom section with ASS plastic terminal housing upper half.
Mounting: External mounting feet.
Connection Method- Lines: standard punch down block terminals (#W wire min - #22 wire max)
Ground: 1= wire damping box terminal lug (#12 wire min - 06 wire max)
Circuit D@Wgn:. Swiss wird. parallel connected hybrid design incorporating discrete all mode protection
and utilizing our encapsulated Optimal Response NetworkN design to provide low"
possible let4hrough-voltages. All suppression circuits are low capacitance and low
impedance and we completely encapsulated in our occlusive compound to assure long
component life and complete protection from the environment and/or vibraWn.
Protection Modes: Dedicated protection components and circuitry for each mode. Discrete Wbaig (Normal
.w�A..45M49
Voltage:. �" 130Vnns tip -bo -ring tip4o.-ground and ring -to ground
1111aximmn Data Rate: Up to 1001(bitsfase
Let-Through-VottaW 4M volts at 133-C1 Impulse (6,000V / 3,000A, combination wave)
Peak Surae Cwrad per Patr. L -I. 10M. L -G I OkA
Response Time: . . cl nanosecond
F71
02- 955
to change at any tirn4L
0WP-A~$>09MAW. 407S=W Smi, Bow Aarm; FZ MeZ USA449q,,11.-*v anegapsAw M (S61) PV7-0W-FAX(Mf)W7.AVj
. .........
Modeh Nmubers
S-PDWS
LaN
V Tests
Let -Through -Voltage
Tat Eev* a- M A
Using ANSIAEEE C -41-1991,
C8245.19W Static, Positive
Pdo*. AN vdtgps are peak
(11096). time basa=l ms.
Test
Mode
Teat Cl l v
" B3JC1 anpuas Wave
6 OOOV 3 OOOA
L -L
i r_
<3501/
�ff.AA It
Modeh Nmubers
S-PDWS
___ o[ AvsBsiblk
25 Pair INV, Pwm4 Block fMgoe
S-PD225-Tl
23 Pair T Ore Elft T -L M PwwA Block Cmaecttd
S-PDB25-A-3
25 Pair Akm Ckv*Vmim 33V&Pmwb MMk Cmmc*d
S-PDB2&D M
25 D& Deb I3se Dowim 33V Pow& Block CmuedM
0
A� i --moi i
mmmm m
are
'OmW P W 4WMW W. *W MMW MK &w Raw& n mW, TEr. MI) 997-00-FAX(MI) W-201
W
IIIc—�
Z
®®®ma®
0
Jii®iid1�
Z
Z
W
iii�i—
�
000®oo
CL
z
®ommmo
CY
ooaaoo
®omoom
i yea iii m
A� i --moi i
mmmm m
are
'OmW P W 4WMW W. *W MMW MK &w Raw& n mW, TEr. MI) 997-00-FAX(MI) W-201
�---�—
0
A� i --moi i
mmmm m
are
'OmW P W 4WMW W. *W MMW MK &w Raw& n mW, TEr. MI) 997-00-FAX(MI) W-201
Model Descriptions
�r
The CTI RJ and DL Series Protectors are stand alone, DIN RAIL mountable.
They are available in 5 different connector types and either Normal (1,500
watt) or Performance (20,000 watt).
The CTI-DL25 may have pins 1 and 7 either protected or tied to ground con-
nector.
The CTI-RJ84-P incorporates GAS Tube instead of the 20,000 watt TVSS di-
odes.
Material: Flame retardant ABS plastic
Flame Rating: UL's best flame rating of 94-5VA
SPECIFICATIONS
State -of -the Art Avalanche Diode Technology
High Speed Clamping of the Transient
High Energy Handling Capability
Low Shunt Capacitance to Reduce Signal Loss
Remains Undamaged By Repetitive Transient
Strikes
Operating Frequency DC to 155 Mhz
Attenuation < 0.5 dB
NEXT > 40 dB
Peak Wattage 3 to 20 kW
Clamping Voltage 7.5 to 170 v
Capacitance < 15pf
Part Matrix
CTI -RJ8-7-N
CTI -RJ8-7-N
w v v
Cap
MFG IDENTIRIERL Surge N =Norrmalmalabilky
(CoreTEK Industries) P = Performance
MODEL DESCTIPTION
RJ8 = DIN Rai
DLI = DIN Rai
01.9 = DN Rai
DL15 = DN Rai
DL25 = DN Rai
W81 a Work Sow
Type
7 = Figh Speed Data
8 = Analog Phone
9 = Digital Phone
Dimensions
Length 4.5"
Height 3.5"
Width 1.25"
Model
Connector
Wires Pro-
tected
CTI-RJ8
RJ45
All
CTI-DL8
Screw Termi-
All 8
nal
CTI-DL9
DB9
All
CTI-DL15
01315
All 15
CTI-DL25
DS25
All 25
02- 955
R 0
- - -.., --- -- I
Te 1. i�icatiat= for the aff9sprotect"I" D"
4 A."
",
AGSPECIFICATIONS
From w aboopmel9may ya N~of
yu #Aponoww
4
Cato SurmaCNDA y" swwwov"
4
Rojod" Cdlpd Or
0
IP" C 24,000A Cad Lar P
61L
6M RFI N*4 FIN TV"
PA" An*
Wkm
411
k" L6vd :: day LiMyI00v
s.9"
Pinww
LA Nei, L -G Mot
LINAMM CUPW Ail"
ICU*
TELCO SPECIFICATIONS AGENCY WARRANTY
ON
,soft yat Qmft yu *40'q Awo*
dAw
y" Product War ** Lano
U%"
Ca�pigo Local 260v canmd 014=0 WSMMW LMVM
U%N=
5WCWPfM) CwwMd WOPM4 WWa* *=Bt
MOM • LWOW" LVhoq p oucom
y"
wino Promroa I P** (44)
PACKAGING SPECIFICATIONSIlrL.I=SPIF.4�lrl(.W
Not ApplicableF"kM"TVN
cwnm
pado" Lano
17 -Ir
Padooft WWW
9jo
• PadMOV h9W
2JO
• "am Croon L040
mmw cw" Wkm
9s
Mohr Croon wow
26 W6
"mw cow QUAD"
6
SCL/4SP=FFATZONS RCAWKIMATIONS
0MWP0W4WSYWMIna 407MmW Som Bow RaA.& FL Ma7, USAAV,11. wxqupmm TEL 041) 907460. FAX(MI)MMMI
............. ... ........... . .. .... I ...... ........ . ...... ......... ........ ... ... . . ....... . ...... . . ............... -- --
02. 955
AWARD UNDER STATE OF FLORIDA
SNAPS CONTRACT NO. 2851929-3
ITEM: Surge Protection System
DEPARTMENT: GSA/MRC
TYPE OF PURCHASE: Term
REASON: The Departmerwof GSA has a need for the purchase
and installation of a Surge Protection System for the
Miami Riverside Center.
RECOMMENDATION: It is recommended that award be made to Omega
Power Systems, Inc. for the purchase and
installation of a Surge Protection System, awarded
under existing State of Florida Negotiated Agreement
Price Schedule (SNAPS) No. 2851929-3, effective
through May 1, 2003, subject to further extensions
by the State of Florida, for the Department of
General Services Administration, at an amount not
to exceed $84,700 and a contingency reserve in the
amount of $10,000, for a total amount of not to
exceed $94,000; allocating funds therefor from
Capital Impro ent Project, Account Code No.
3 L1042.42 01.6.8 30.
Judy S. CartecK
:tor of Purchasing
Date
AwardUnderStateSNAPS
02- 955