HomeMy WebLinkAboutR-02-0786a
J-02-604
6/24/02
RESOLUTION NO. 02— 78+6
A RESOLUTION OF THE MIAMI CITY COMMISSION
APPROVING THE PROCUREMENT OF LIGHT, MEDIUM
AND HEAVY TRUCKS FROM VARIOUS VENDORS FOR
THE DEPARTMENT OF PUBLIC WORKS, OPERATIONS
DIVISION, ON AN AS -NEEDED CONTRACT BASIS,
UNDER EXISTING STATE OF FLORIDA CONTRACT
NOS. 070-700-02-1, EFFECTIVE THROUGH
MAY 31, 2003, AND 070-001-02-1, EFFECTIVE
THROUGH SEPTEMBER 30, 2002, AND ANY
EXTENSIONS, IN AN AMOUNT NOT TO EXCEED
$520,752; ALLOCATING FUNDS FROM ACCOUNT
CODE NO. 352216.319201.6.840.
BE IT RESOLVED BY THE COMMISSION OF THE CITY OF MIAMI,
FLORIDA:
Section 1. The procurement of light, medium and heavy
trucks from various vendors for the Department of Public Works,
Operations Division, on an as -needed contract basis, under
Existing State of Florida Contract Nos. 070-700-02-1, effective
through May 31, 2003, and 070-001-02-1, effective through
September 30, 2002, and any extensions, in an amount not to
exceed $520,752, is approved, with funds allocated from Account
Code No. 352216.319201.6.840.
CITY C MMTSSION
ME
J U L Q 9 2002
aaw11jon NO.
02- 786
01
Section 2. This Resolution shall become effective
immediately upon its adoption and signature of the Mayor.!'
PASSED AND ADOPTED this 9th day of July , 2002.
ATTEST:
PRISCILLA A. THOMPSON
CITY CLERK
APPROVE;rAS
71'Ji'Y ATTORNEY
W6312:tr:LB
IOM"ANUEL A. DIAZ, R
CORRECTNESS V
1� If the Mayor does not sign this Resolution, it shall become effective at
the end of ten calendar days from the date it was passed and adopted. If
the Mayor vetoes this Resolution, it shall become effective immediately
upon override of the veto by the City Commission.
Page 2 of 2
02- 786
CITY OF MIAMI, FLORIDA CA=2
INTER -OFFICE MEMORANDUM
TO : Honorable Mayor and Members DATE : JUN 2 8 200
FILE
Of the City Commission Resolution authorizing
SUI&JECT : Purchase of Light
Medium & Heavy Trucks,
State of Florida Contract
FROM :*City
menez REFERENCES: No's 070-700-02-1 Hb
age No. 070-001-02-1
ENCLOSURES:
It is respectfully recommended that the City Commission adopt the
attached Resolution authorizing a contract for the purchase of light,
medium and heavy trucks, from various vendors under existing State of
Florida Contract No's. 070-700-02-01, & 070-001-02-1, effective until
May 31, 2003, and September 30, 2002, respectively, on an as needed
contract basis, subject to any extension thereto by the State of Florida.
Funds are allocated in the amount of $520,752.00 from CIP Account No.
352216.319201.6.840 authorizing said purchases, as needed, subject to
availability of funds.
BACKGROUND
The purchase of the five (5) 8 -Yard Dump trucks, two (2) 12 -Yard
Dump trucks and five (5) Crew -Cab Pick-up trucks will serve as
replacement trucks for use by the Public Works Operations Division
for maintenance of the public right-of-ways. Various municipalities
and agencies have realized substantial savings utilizing the State of
Florida contract for the purchase of light, medium and heavy trucks,
from various vendors. The Purchasing Department has a need to secure
a contract for this commodity for use by the Public Works department on
an as needed basis, when needed contract basis under existing State of
Florida Contract No's. 070-700-02-1 & 070-001-02-1. It is therefore
recommended that award be made to Various Vendors for the purchase
of said commodities.
N.
Funds are allocated from CIP Account No. 352216.319201.6.840 for the
purchase of Medium and Heavy Trucks and Automobiles and Light
Trucks. Further, funds for maintenance support services will be
allocated in the Department of Public Works' General operating budget.
Fiscal I pact:n _ None - CIP Budgeted Item
CAG/ �R/JHJ/JSC
02- 786
Budgetary Impact Analysis
1. Department public Works
2. Agenda Item # (if available)
Division Operations
3. Title and brief description of legislation or attach ordinance/resolution:
The purchase of the five (5) 8 -Yard Dump trucks and two (2) 12 -Yard
Dump trucks are replacement trucks for use by the Public Works Operations
Division for maintenance of the public rights-of-way. The purchase of
e five Crew -ca pick-up trucks will also be used for the
same purpose.
4. Is this item related to revenue? NO: YES (If yes, skip to item #7.)
5. Are there sufficient funds in Line Item?
YES: X Index Code P_Minor Obi. Code 840
NO: _ Complete the following questions:
Amount .572-0,:-'-7 -Ta
6 . Source of funds: Amount budgeted in the Line Item $
Balance in Line Item $
(v t� Amount needed in the Line Item $
S17ffieipnt flind.,z Will ha tranmfarrari frnm +ho fnUni=r;-r I;-- ;+--
ACTION ACCOUNT NUMBER ACCOUNT NAME
TOTAL
Index/Minor Object/Project No.
From
$
From
$
From
$
To
Is
7. Any additional comments?
87t/ pro ed
` %,
Department Dire or/Designee DatA
FOR DEPARTMENT OF MANAGEMENT AND BUDGET USE ONLY
Verified b : Verified by: Transfer done by:
— C. �VAL...
I g
D a of Man went an dget Budget 1Yst
Date
Date
02— 786
070-700-02-1 = Medium and Heavy Trucks
Medium and Heavy Trucks
070-700-02-1
Effective: 1/7/02 through 5/31/03
Page 1 of 1
Certification
Special Conditions
Exhibit A - Specifications
Exhibit B - Price Sheet
Exhibit C - Truck Bodies
Exhibit D - Purchase Order Information
Exhibit E - Notice of Non -Contract Purchase
Exhibit F - Certification of Compliance
Exhibit G - Acknowledgement of Order
Exhibit H - Ordering Instructions
Complete Contract
62— '786
http://www.myflorida.com/st—contracts/070700021/ 5/29/2002
FLORIDA
DEPARTMENT
OF
MANAGEMENT
SERVICES
JEB BUSH
GOVERNOR
CYNTHIA A. HENDERSON
SECRETARY
STATE PURCHASING
4050 ESPLANADE WAY
SUITE 350
TALLAHASSEE, FLORIDA
32399-0950
TELEPHONE:
950-489-9440
FAx:
850.414-6122
INIEMET.
WWWWYFLORMACOM
Suite 315
CERTIFICATION OF CONTRACT
TITLE: MEDIUM AND HEAVY TRUCKS
CONTRACT NO.: 070-700-02-1
ITB NO.: 26-070-700-P
EFFECTIVE: JANUARY 7, 2002 THROUGH MAY 31, 2003
SUPERSEDES: 070-700-00-1
CONTRACTOR(S):
ATLANTIC TRUCK CENTER INC. (A)
HEINTZELMANS TRUCK CENTER INC. (A)
INTERNATIONAL TRUCK AND ENGINE CORPORATION (A)
ORVILLE BECKFORD FORD MERCURY (N)
ANY QUESTIONS, SUGGESTIONS, OR CONTRACT SUPPLIER
PROBLEMS WHICH MAY ARISE SHALL BE BROUGHT TO THE
ATTENTION OF JIM DEN BLEYKER AT (850) 488-8367, SUNCOM 278-
8367, E-MAIL: jimd(-,dms.state.1Lus
A. AUTHORITY - Upon affirmative action taken by the State of Florida
Department of Management Services, a contract has been executed
between the State of Florida and the designated contractors.
B. EFFECT - This contract was entered into to provide economies in the
purchase of Medium and Heavy Trucks by all State of Florida agencies
and institutions. Therefore, in compliance with Section 287.042, Florida
Statutes, all purchases of these commodities shall be made under the
terms, prices, and conditions of this contract and with the suppliers
specified.
C. ORDERING INSTRUCTIONS - All purchase orders shall be issued in
accordance with the attached ordering instructions. Purchaser shall order
at the prices indicated, exclusive of all Federal, State and local taxes.
All contract purchase orders shall show the State Purchasing contract
number, product number, quantity, description of item, with unit prices
extended and purchase order totaled. (This requirement may be waived
when purchase is made by a blanket purchase order.)
02- 786
D. CONTRACTOR PERFORMANCE - Agencies shall report any vendor failure to perform according to
the requirements of this contract on Complaint to Vendor, form PUR 7017. Should the vendor fail to
correct the problem within a prescribed period of time, then form PUR 7029, Request for Assistance, is
to be filed with this office.
E. SPECIAL AND GENERAL CONDITIONS - Special and general conditions are enclosed for your
information. Any restrictions accepted from the supplier are noted on the ordering instructions.
F. CONTRACT APPRAISAL FORM - State Contract Appraisal, form PUR 7073 should be used to
provide your input and recommendations for improvements in the contract to State Purchasing for
receipt no later than 90 days prior to the expiration date of this contract.
Authorized Signa (date)
RMjdb
Attachments
02-- 786
070-700-400 8 YARD DUMP TRUCK, TANDEM AXLE, CLASS 8, 52,000 LB. GV WR (6X4)
(33)
NOTE: This Specification/Price List is not complete unless it is used in conjunction with General
Specifications AU Medium And Heavy Trucks, GSAT-1.
INTENDED VEHICLE USE
USED FOR HAULING LOOSE MATERIALS SUCH AS DIRT, GRAVEL, ETC. AND
TRANSPORTATION OF UP TO TWO INDIVIDUALS ON PAVED AND UNPAVED, GRADED ROADS.
10.
12.
20.
30
*STD GVWR
STD PAYLOAD CAPACITY
52,000 LBS.
31,150 LBS. (APPROX)
*GVWR - Gross Vehicle Weight Rating is the total weight of a fully equipped, fully loaded truck.
ENGINE:
A. Diesel engine, liquid cooled, with a minimum of 250 Gross HP and 800 lbs. -ft. Gross Torque
(per the latest issue of SAE 31349), and a minimum displacement of 7.6L (466 CID). The
following engine, or approved equivalent, are acceptable:
CUMMINS ISC: 8.3L (504 CID), 260 Gross HP, 800 lbs. -ft. Gross Torque
INT DT -466: 7.6L (466 CID), 250 Gross HP, 800 lbs. -ft. Gross Torque
B. Standard cooling system with antifreeze.
C. Premium rubber (International Premium (EPDM), Gates Blue Stripe or approved equivalent) or
silicone radiator hoses, by-pass hoses, heater hoses, and other coolant hoses.
D. Dry type air cleaner with service (restriction) indicator.
E. Engine protection system, at a minimum, must be activated by low engine oil pressure and high
engine temperature. System shall, at a minimum, include a warning light(s) and a derate
(rampdown) feature that will reduce engine power and speed, or shut down the engine when
any of these functions exceed normal limits.
F. Horizontal exhaust or curved vertical stack to accommodate dump body cab guard.
ELECTRICAL SYSTEM:
A. Minimum 100 amp 12 v. alternator.
B. Batteries to have a minimum total of 1100 CCA @ 0 degrees F.
TRANSMISSION: Minimum 6 -speed automatic transmission with PTO opening. Allison MD3560-P
or approved equivalent.
AXLES 8t SUSPENSION:
A. Steel front axle and suspension with shock absorbers, if available, minimum 12,000 lb. GAWR.
172
02-- 786
B. Front wheel oil -lubricated bearings and seals.
C. Single speed tandem drive rear axle, minimum 40,000 lb. GAWR. Rear axle ratio is to be a
5.86 or the closest possible ratio available. Rear suspension must have minimum 52 inch steel
walking beams. Hendrickson RT2-400/RT403 or approved equivalent.
NOTE TO CONTRACTOR: THIS TRUCK MUST BE CAPABLE OF PROVIDING A TOP
SPEED OF APPROXIMATELY 65 MPH AT THE PUBLISHED GOVERNED RPM FOR
THE ENGINE SPECIFIED.
D. Front wheel hubs and rear axles shall be filled with synthetic lubricant.
40. PERFORMANCE ITEMS:
A. Factory installed speedometer, odometer, ammeter or voltmeter, fuel gauge, engine oil pressure
gauge, coolant temperature gauge, tachometer, air pressure gauge and dash -mounted engine
hourmeter.
B. Power steering.
50. COMFORT ITEMS:
A. Factory installed AM -FM radio.
B. Fresh air heater and defogger.
C. Arm rests both sides, if available; sunvisors, both sides.
D. Tinted glass all windows, including windshield.
E. Air conditioning.
60. SAFETY ITEMS:
A. Dual air horns with single base.
B. Daytime running lights.
C. Stainless steel or aluminum outside mirrors and brackets, left and right side. Mirrors to be
large West Coast type, 6 inches x 16 inches minimum, to include stainless steel lower convex
spot mirrors on both sides.
D. Automatic -adjustable volume backup alarm. Must meet latest issue of SAE J994, Type B,
107dB(A). Factory or dealer installed.
E. Rain Flaps: Splash and spray suppressant rain flaps, straight grass type, installed on heavy-duty
hangers. Factory or dealer installed.
NO CONTRACTOR ADVERTISING, OR IDENTIFICATION WILL BE PERMITTED ON
RAIN FLAPS.
F. All access steps shall be self-cleaning slip -resistant grating.
62. BRAKES:
A. ABS air brake system, minimum 13.2 cfm air compressor, and air reservoir(s) with automatic
moisture ejector valve(s) (not heated).
173
U2-, 786
B. Moisture ejector valve(s) not to be mounted on bottom of air tank if at all possible. Side or
remote location(s) preferred.
C. Spring applied parking brake with in -cab parking brake control.
D. Automatic slack adjusters, front and rear.
E. Brake dust shields.
F. Outboard mounted brake drums, front and rear. (NOTE: Allows brake repair without
removing axle hubs.)
G. Low air pressure warning indicator in cab.
H. Air dryer with heater. Allied-Signal/Bendix AD -9 or AD -IP, Wabco System Saver 1200 or
approved equivalent.
70. TIRES & WHEELS:
A. Ten (10) 275/80R22.5G (14PR) or 295/75R22.5G (14PR) or larger, tubeless, low profile, radial
tires with highway tread.
B. All wheels to be one-piece steel disc, 10 -hole, I.S.O hub pilot mount, 22.5 inch diameter.
C. Front, inside rear and outside rear wheels to be fully interchangeable.
80. CHASSIS, FRAME, CAB:
A. Minimum 52,000 lb. GV WR, factory certified.
B. Minimum 2,400,000 in -lb. RBM to rear end of frame, factory reinforced if necessary. SEE
NOTE 1 OF SPECIFICATION GSAT-1.
C. Cab -to -axle (CA) dimension as recommended by the body Manufacturer shall be provided. CA
must provide a cab/body (CB) clearance of 3" to 5".
D. Factory installed, step -type steel fuel tank(s), minimum 70 U.S. gallon total capacity.
E. Front tow hooks or tow pins or center mounted recessed tow hook.
F. Standard front bumper.
82. CAB EQUIPMENT:
A. Conventional cab, with tilt -type hood and fender assembly.
B. Air suspension driver seat with matching fixed base companion seat. Seats to be a high back or
medium back with headrest. The same Manufacturer must provide both seats. Bostrom,
EzyRider, National Cush -N -Aire, Sears, or approved equivalent.
C. Exterior grab handles both sides.
D. Manufacturer's standard paint and colors.
E. Rear cab window with fixed tinted glass.
84. BODY: Eight cubic yard heavy-duty dump body, installed, w/hoist as per enclosed Specification
DUMP -8.
NOTE: Vehicle shall meet all requirements of Title 49, Code of Federal Regulations, and 393.86 rear
end .protection.
90. CONDITIONS: Contractor shall provide a Manufacturer's print-out (Ford "DORA", Freightliner
174
02- 786
"Spec Pro", "GM AutoBooV% International "Vehicle Specifications", Mack "Order/CustomerNehicle
Information", Sterling "Spec Pro", or approved equivalent) to verify the Vehicle meets all the
requirements of this Specification. Also, any dealer installed aftermarket components, if specified,
must be noted on the Manufacturer's print-out. All enclosed Conditions and Requirements shall apply.
175
�; 7S6
070-700400
(33)
MAKE: INTERNATIONAL
CONTRACTOR DISCOUNT* MODEL PRICE
Western District INTERNATIONAL 480.00 4900 6X4 58,998.00 (A)
Northern District NO AWARD (B)
Central District NO AWARD (C)
Southern District INTERNATIONAL 450.00 4900 6X4 59,028.00 (D)
NOTE: ONLY THE ABOVE NAMED CONTRACTOR (S) IS/ARE AUTHORIZED TO SELL THIS
COMMODITY UNDER THIS CONTRACT!
*Discount for truck picked up by ordering agency at Contractor's place of business.
Approximate delivery time required after receipt of order: (INT) 60 TO 90 DAYS ;
OPTIONS: 070 -700 -401 -Option, 8 Yard Dump Truck, Class 8, 52,000 Lb. GVWR (6x4)
OPTIONS: ONT) INTERNATIONAL TRUCK;
(1) 1002. Delay in warranty start date to allow for body installation. (Warranty to become
effective when Vehicle is placed in service rather than at time of delivery).
(INT) PRICE: N/C
PRICE:
(INT) CUSTOMER MUST ADVISE WHEN UNIT IS PLACED IN SERVICE
176
02-- 786
(2)
1003. Extended engine warranty, covering 100% of parts and labor for all engine parts
between crankshaft pulley and flywheel. Bid for a period of 60 months/150,000
miles/6500 hours. The remaining terms, other than the above, to be in accordance with
the engine Manufacturer's published warranty which is closest to each warranty Bid.
Submit two copies of the standard engine warranty and of each special warranty Bid.
Also, submit two copies of all extended engine warranties that are normally available to
commercial customers and commercial list prices for same.
(INT) PRICE: 460.00
(NOTE TO ELIGIBLE USER: CONSULT THE PROVIDER FOR EXACT COVERAGE OF THIS
WARRANTY)
(3) 2003. Electronic PTO overspeed control. Chelsea, Muncie or approved equivalent. Indicate
Manufacturer and model.
(4)
(5)
(6)
MANUFACTURER: CHELSEA MODEL NO.: EOC
(INT) PRICE: 331.00
2004. Direct drive manual transmission with PTO opening(s) and a minimum of ten forward
speeds. Transmission must have a minimum low gear reduction of 19.00: 1.
Transmission shall be filled with synthetic lubricant. Minimum 14 inch diameter two -
plate ceramic -faced clutch. NOTE: Include the credit for a manual transmission PTO as
specified in the enclosed dump body Specification. Indicate Manufacturer and model.
MANUFACTURER: SPICER MODEL NO.: PS84-1OV
3002.
3003
(INT) PRICE (CREDIT): (5,462.00)
"No -Spin" or automatic positive locking differential for the rearmost axle or both rear
axles.
(INT) PRICE: 520.00
Driver control traction differential (DCDL) for the rearmost axle or both rear axles.
177
(INT) PRICE: 824.00
02- '786
(7) 5002. Delete air conditioning.
(INT) PRICE (CREDIT):58( 5.00)
(8) 5003. Rain shields over door windows, both sides. Auto Ventshade Co. (1-800-241-7219) or
approved equivalent. Factory or dealer installed.
(EM PRICE: 35.00
(9) 6004. Front clearance indicators. Factory or dealer installed. (Indicators shall be
approximately 36 inches in length located on the left and right front corners of the
Vehicle.)
(INT) PRICE: 41.00
(10) 6005. Air hom(s), single base, mounted under the cab or hood. Roof mounted homs are not
acceptable. Bid in place of air horns.
(INT) PRICE: 279.00
(11) 6204. Automatic air brake drain system. C1earDrain System or approved equivalent. Bid in
lieu of the air dryers specified in Section 62. H. Unit must be installed by the Vehicle
Manufacturer. Dealer installed units are not acceptable. SEE SPECIFICATION ADS -l.
(INT) PRICE: 611.00
(12) 7001. Tubeless radial tires with on/offhighway tread for rear only. Bid eight (8) 11R22.5G
(14PR) or larger tires for on/off highway use and two (2) 11R22.5G (14PR) or larger
tires for on highway use. Bid in lieu of base tires. Rear tires to be Bridgestone M711,
Goodyear G124/G164 RTD, Michelin XM+S4/XDE M/S or approved equivalent.
(INT) PRICE: 169.00
(13) 8002. Pintle hook, installed. To be swivel type and must have a capacity of 49,000 lbs. Gross
trailer weight and 9800 lbs. Vertical load, minimum. Holland Model PH -760, Wallace
Model B30 or approved equivalent. Indicate Manufacturer and model.
MANUFACTURER: WALLACE MODEL NO.: B-30
(INT) PRICE: 394.00
178
02- 786
(14) 8013. Air brake package for straight truck and trailer. Full trailer air brake controls with
airlines, glad hands and wiring routed to the rear end of the frame.
(INT) PRICE: 539.00
(15) 8014. Additional fuel capacity. Factory installed, step -type, steel or aluminum fuel tank(s),
minimum 100 U.S. gallons total capacity.
(INT) PRICE: 91.00
(16) 8201. Special state color. DOT Yellow (DuPont Centari L9069A, Freightliner/Sterling 3258,
Navistar 4421). SEE NOTE 3 OF SPECIFICATION GSAT-1.
(INT) PRICE: N/C
(17) 8203. Special colors. Other than Manufacturer's and the one listed in option 8201.
(INT) PRICE: 195.00
RM MUST PROVIDE COLOR NUMBER
(18) 8213. Special state colors, two-tone. White (DuPont Centari K9031A, Freightliner/Sterling
0007, Navistar 9219) above dripstrip on cab and DOT Yellow (DuPont Centari
L9069A, Freightliner/Sterling 3258, Navistar 4421) on remainder of cab. SEE NOTE 3
OF SPECIFICATION GSAT-1.
(INT) PRICE: 160.00
(19) 8214. Two-tone colors. Manufacturer's standard two-tone colors.
(INT) PRICE: 160.00
(INT) MUST PROVIDE COLOR NUMBER
(20) 8215. Special colors, two-tone. Special two-tone colors other than the one listed in option
8213.
(INT) PRICE: 290.00
(INT) MUST PROVIDE COLOR NUMBER, MAY REQUIRE PAINT CHIP
179
02—
(21) 8216. Air suspension passenger seat. Seat to be a high back or medium back with headrest.
The same Manufacturer as the driver seat must provide passenger seat. Bostrom,
EzyRider, National Cush -N -Aire, Sears, or approved equivalent. Bid in lieu of the base
passenger seat specified in Section 82.B.
(INT) PRICE: 145.00
(22) 8410. Vibrator installed on dump body. Phillips Temro, Inc., Model VIBRA 3000, (Phone 1-
800-328-6108) or approved equivalent. To be installed on mounting base rather than
dump body floor plate. Indicate Manufacturer and model.
MANUFACTURER: PHILLIPS TEMRO MODEL NO.: VIBRA 3000
(INT) PRICE: 727.00
(23) 8411. Electric roll -up type dump truck cover, installed and ready for use. Tarp to be heavy-
duty vinyl mesh, dark color only. Tarp system must include a direct drive gear motor
assembly, underbody or side mount spring assembly, and control switch mounted inside
the cab readily accessible to the drive. Metal parts to be painted as necessary to match
body. Donovan Enterprises, Inc. (Phone 1-800-327-8287) Model 5000 EL -D or Pioneer
(Phone 1-800-237-0225) Model EDD -150013; Roll -Rite Corp. (Phone 1-800-297-9905)
Model RR503; or approved equivalent. Bid in lieu of cover specified in body
Specifications. Indicate Manufacturer and model.
MANUFACTURER: ROLL -RITE
180
MODEL NO.: RR -503
(INT) PRICE: 465.00
02- 786
070-700-450 12 YARD DUMP TRUCK, TANDEM AXLE, CLASS 8, 64,000 LB. GVWR (6X4)
(33 -HD)
NOTE: This Specification/Price List is not complete unless it is used in conjunction with General
Specifications All Medium And Heavy Trucks, GSAT-1.
INTENDED VEHICLE USE
USED FOR HAULING LOOSE MATERIALS SUCH AS DIRT, GRAVEL, ETC. AND
TRANSPORTATION OF UP TO TWO INDIVIDUALS ON PAVED AND UNPAVED, GRADED ROADS.
*STD GVWR
STD PAYLOAD CAPACITY
64,000 LBS.
42,400 LBS. (APPROX)
*GVWR - Gross Vehicle Weight Rating is the total weight of a fully equipped, fully loaded truck.
10. ENGINE:
A. Diesel engine, liquid cooled, with a minimum of 330 Gross HP and 1150 lbs. -ft. Gross Torque
(per the latest issue of SAE J1349), and a minimum displacement of 8.71,(530 CID). The
following engines, or approved equivalent, are acceptable:
CUMMINS ISL: 8.9L (540 CID), 330 Gross HP, 1150 lbs. -ft. Gross Torque
INT 530: 8.7L (530 CID), 330 Gross HP, 1150 lbs. -ft. Gross Torque
B. Standard cooling system with antifreeze.
C. Premium rubber (International Premium (EPDM), Gates Blue Stripe or approved equivalent) or
silicone radiator hoses, by-pass hoses, heater hoses, and other coolant hoses.
D. Dry type air cleaner with service (restriction) indicator.
E. Engine protection system, at a minimum, must be activated by low engine oil pressure and high
engine temperature. System shall, at a minimum, include a warning light(s) and a derate
(rampdown) feature that will reduce engine power and speed, or shut down the engine when
any of these functions exceed normal limits.
F. Horizontal exhaust or curved vertical stack to accommodate dump body cab guard.
12. ELECTRICAL SYSTEM:
A. Minimum 100 amp 12 v. alternator.
B. Batteries to have a minimum total of 1100 CCA @ 0 degrees F.
20. TRANSMISSION:
A. Manual overdrive transmission with a minimum of ten forward speeds. Transmission must
have PTO opening(s) and a minimum low gear reduction of 14.56:1.
B. Transmission shall be filled with synthetic lubricant.
C. Minimum 14 inch diameter two -plate ceramic -faced clutch.
181
02—
30. AXLES & SUSPENSION:
A. Steel front axle and suspension -with shock absorbers, minimum 18,000 lb. GAWK.
B. Front wheel oil -lubricated bearings and seals.
C. Single speed tandem drive rear axle, minimum 46,000 lb. GAWK. Rear axle ratio is to be a
4.56, or the closest possible ratio available. Rear suspension must have minimum 54 inch steel
walking beams. Hendrickson RT2-460/RT463 or approved equivalent.
NOTE TO CONTRACTOR: THIS TRUCK MUST BE CAPABLE OF PROVIDING A TOP
SPEED OF APPROXIMATELY 65 MPH AT THE PUBLISHED GOVERNED RPM FOR
THE ENGINE SPECIFIED.
D. Front wheel hubs and rear axles shall be filled with synthetic lubricant.
40. PERFORMANCE ITEMS:
A. Factory installed speedometer; odometer, ammeter or voltmeter, fuel gauge, engine oil pressure
gauge, coolant temperature gauge, tachometer, air pressure gauge and dash -mounted engine
hourmeter.
B. Power steering.
50. COMFORT ITEMS:
A. Factory installed AM -FM radio.
B. Fresh air heater and defogger.
C. Arm rests both sides, if available; sunvisors, both sides.
D. Tinted glass all windows, including windshield.
E. Air conditioning.
60. SAFETY ITEMS:
A. Dual air horns with single base.
B. Daytime running lights.
C. Stainless steel or aluminum outside mirrors and brackets, left and right side. Mirrors to be
large West Coast type, 6 inches x 16 inches, minimum, to include stainless steel lower convex
spot mirrors on both sides.
D. Automatic -adjustable volume backup alarm. Must meet latest issue of SAE J994, Type B,
107dB(A). Factory or dealer installed.
E. Rain Flaps: Splash and spray suppressant rain flaps, straight grass type, installed on heavy-duty
hangers. Factory or dealer installed.
NO CONTRACTOR ADVERTISING, OR IDENTIFICATION WILL BE PERMITTED ON
RAIN FLAPS_
F. All access steps shall be self-cleaning slip -resistant grating.
182
62- 786
62. BRAKES:
-A. ABS air brake system, minimum 13.2 cfm air compressor, and air reservoir(s) with automatic
moisture ejector valve(s) (not heated).
B. Moisture ejector valve(s) not to be mounted on bottom of air tank if at all possible. Side or
remote location(s) preferred.
C. Spring applied parking brake with in -cab parking brake control.
D. Automatic slack adjusters, front and rear.
E. Brake dust shields.
F. Outboard mounted brake drums, front and rear. (NOTE: Allows brake repair without
removing axle hubs.)
G. Low air pressure warning indicator in cab.
H. Air dryer with heater. Allied-SignalBendix AD -9 or AD -IP, Wabco System Saver 1200 or
approved equivalent.
70. TIRES & WHEELS:
A. Tubeless radial tires with highway tread. Bid eight (8) 11R22.5H (16 PR) or larger rear tires
and two (2) 385/65R22.5J (18PR) or larger front tires.
B. All wheels to be one-piece steel disc, 10 hole, I.S.O. hub pilot mount, 22.5 inch diameter.
C. Inside rear and outside rear wheels to be fully interchangeable.
80. CHASSIS, FRAME, CAB:
A. Minimum 64,000 lb. GVWR, factory certified.
B. Minimum 2,600,000 in -lb. RBM to rear end of frame, factory reinforced if necessary. SEE
NOTE 1 OF SPECIFICATION GSAT-1.
C. Cab -to -axle (CA) dimension as recommended by the body Manufacturer shall be provided. CA
must provide a cab/body (CB) clearance of 3" to 5".
D. Factory installed, step -type steel fuel tank(s), minimum 100 U.S. gallon total capacity.
E. Front tow hooks or tow pins or center mounted recessed tow hook.
F. Standard front bumper.
82. CAB EQUIPMENT:
A. Conventional cab, with tilt -type hood and fender assembly. Grille area shall include a stone
guard, if available. Navistar Order Code 09580 or approved equivalent.
B. Air suspension driver seat with matching fixed base companion seat. Seats to be a high back or
medium back with headrest. The same Manufacturer must provide both seats. Bostrom,
EzyRider, National Cush -N -Aire, Sears, or approved equivalent.
C. Exterior grab handles both sides.
D. Manufacturer's standard paint and colors.
E. Rear cab window with fixed tinted glass.
183
84. BODY: Twelve cubic yard heavy-duty dump body, installed, Whoist as per enclosed Specification
DUMP -12.
NOTE: Vehicle shall meet all requirements of Title 49, Code of Federal Regulations, and 393.86 rear
end protection.
90. CONDITIONS: Contractor shall provide a Manufacturer's print-out (Ford "DORA", Freightliner
"Spec Pro", "GM AutoBook", International "Vehicle Specifications", Mack "Order/CustomerNehicle
Information", Sterling "Spec Pro", or approved equivalent) to verify the Vehicle meets all the
requirements of this Specification. Also, any dealer installed aftermarket components, if specified,
must be noted on the Manufacturer's print-out. All enclosed Conditions and Requirements shall apply.
184
02- 786
070-700-450
(33 -HD)
MAKE: INTERNATIONAL
CONTRACTOR DISCOUNT* MODEL PRICE
Western District
INTERNATIONAL
480.00
2674 6X4
64,801.00 (A)
Northern District
INTERNATIONAL
318.00
2674 6X4
64,963.00 (B)
Central District
INTERNATIONAL
222.00
2674 6X4
65,059.00 (C)
Southern District
INTERNATIONAL
450.00
2674 6X4
64,831.00 (D)
NOTE: ONLY THE ABOVE NAMED CONTRACTOR (S) IS/ARE AUTHORIZED TO SELL THIS
COMMODITY UNDER THIS CONTRACT!
*Discount for truck picked up by ordering agency at Contractor's place of business.
Approximate delivery time required after receipt of order: 60 TO 90 DAYS
OPTIONS: 070 -700 -451 -Option, 12 Yard Dump Truck, Class 8, 62,000 Lb. GVWR (6x4)
OPTIONS:
(1) 1001. Delay in warranty start date to allow for body installation. (Warranty to become
effective when Vehicle is placed in service rather than at time of delivery).
PRICE: N/C
CUSTOMER MUST ADVISE INTERNATIONAL WHEN UNIT IS PLACED IN SERVICE
(2) 1002. Extended engine warranty, covering 100% of parts and labor for all engine parts
between crankshaft pulley and flywheel. Bid for a period of 60 months/150,000
miles/6500 hours. The remaining terms, other than the above, to be in accordance with
the engine Manufacturer's published warranty which is closest to each warranty Bid.
Submit two copies of the standard engine warranty and of each special warranty Bid.
Also, submit two copies of all extended engine warranties that are normally available to
commercial customers and commercial list prices for same.
PRICE: 455.00
(NOTE TO ELIGIBLE USER: CONSULT THE PROVIDER FOR EXACT COVERAGE OF THIS
WARRANTY)
185
02- 786
(3) 2003. Electronic PTO overspeed control. Chelsea, Muncie or approved equivalent. Indicate
Manufacturer and model.
MANUFACTURER: CHELSF_ - MODEL NO.: EOC
PRICE: 332.00
(4) 3001. "No -Spin", automatic positive locking differential for the rearmost axle or both rear
axles.
PRICE: 428.00
(5) 3002. Driver control traction differential (DCDL) for the rearmost axle or both rear axles.
PRICE: 593.00
(6) 5002. Delete air conditioning.
PRICE (CREDIT): 585.00
(7) 5003. Rain shields over door windows, both sides. Auto Ventshade Co. (1-800-241-7219) or
approved equivalent. Factory or dealer installed.
PRICE: 35.00
(8) 6003. Front clearance indicators. Factory or dealer installed. (Indicators shall be
approximately 36 inches in length located on the left and right front comers of the
Vehicle.)
PRICE: 41.00
(9) 6203. Automatic air brake drain system. ClearDrain System or approved equivalent. Bid in
lieu of the air dryers specified in Section 62. H. Unit must be installed by the Vehicle
Manufacturer. Dealer installed units are not acceptable. SEE SPECIFICATION ADS -
1.
PRICE: 611.00
(10) 7001. Tubeless radial tires with on/offhighway tread for rear only. Bid eight (8) 11R22.5H
(16PR) or larger tires for on/off highway use. Bid in lieu of base rear tires. Rear tires
to be Goodyear G 124/G 164 RTD, Michelin XM+S4/XDE M/S or approved equivalent.
PRICE: 480.00
186
02- 786
(11) 8001. Pintle hook, installed. To be swivel type and must have a capacity of 49,000 lbs. Gross
trailer weight and 9800 lbs. Vertical load, minimum. Holland Model PH -760, Wallace
Model B30 or approved equivalent. Indicate Manufacturer and model.
MANUFACTURER: WALLACE MODEL NO.: B-30
PRICE: 394.00
(12) 8008. Air brake package for straight truck with trailer. Full trailer air brake controls with air
lines, glad hands and wiring routed to the rear end of the frame.
PRICE: 391.00
(13) 8009 Additional fuel capacity. Factory installed, step -type, steel or aluminum fuel tank(s),
minimum 100 U.S. gallons total capacity.
PRICE: 88.00
(14) 8201. Special state colors. DOT Yellow (DuPont Centari L9069A, Freightliner/Sterling 3258,
Navistar 4421). SEE NOTE 3 OF SPECIFICATION GSAT-1.
PRICE: N/C
(15) 8203. Special state color, two-tone. White (DuPont Centari K9031A, Freightliner/Sterling
0007, Navistar 9219) above dripstrip on cab and DOT Yellow (DuPont Centari
L9069A, Freightliner/Sterling 3258, Navistar 4421) on remainder of cab. SEE NOTE 3
OF SPECIFICATION GSAT-1.
PRICE: 160.00
(16) 8204. Special colors. Other than Manufacturer's and the one listed in option 8201.
PRICE: 196.00
MUST PROVIDE COLOR NUMBER, MAY REQUIRE PAINT CHIP
(17) 8206. Two-tone colors. Manufacturer's standard two-tone colors.
PRICE: 160.00
MUST PROVIDE COLOR NUMBER
(18) 8207. Special colors, two-tone. Special two-tone colors other than the one listed in option
8203.
PRICE: 290.00
MUST PROVIDE COLOR NUMBER
187
62-- 786
(19) 8208. Air suspension passenger seat. Seat to be a high back or medium back with headrest.
The same Manufacturer as the driver seat must provide passenger seat. Bostrom,
EzyRider, National Cush -N -Aire, Sears, or approved equivalent. Bid in lieu of the base
passenger seat specified in Section 82.B.
PRICE: 146.00
(20) 8401. Vibrator installed on dump body. Phillips Temro, Inc., Model VIBRA 3000, (Phone 1-
800-328-6108) or approved equivalent. To be installed on mounting base rather than
dump body floor plate. Indicate Manufacturer and model.
MANUFACTURER: PHILLIPS TEMRO MODEL NO.: VIBRA 3000
PRICE: 727.00
(21) 8402. Electric roll -up type dump truck cover, installed and ready for use. Tarp to be heavy-
duty vinyl mesh, dark color only. Tarp system must include a direct drive gear motor
assembly, underbody or side mount spring assembly, and control switch mounted inside
the cab readily accessible to the driver. Metal parts to be painted as necessary to match
body. Donovan Enterprises, Inc. (Phone 1-800-327-8287) Model 5000 EL -D; or
Pioneer (Phone 1-800-237-0225) Model EDD -15001); Roll -Rite Corp. (Phone 1-800-
297-9905) Model RR503; or approved equivalent. Bid in lieu of cover specified in
body Specifications. Indicate Manufacturer and model.
MANUFACTURER: ROLL -RITE MODEL NO.: RR -503
PRICE: 460.00
(22) 8404. Twin telescopic hoist for 12 cubic yard dump body. Galion UT66392, Heil Model
HP2T52-72 or approved equivalent. Hoist is to be an N.T.E.A. Class 110, minimum.
Bid in lieu of hoist specified in DUMP -12. Indicate Manufacturer and model.
MANUFACTURER: NEIL MODEL NO.: HP 2T-52-72
188
PRICE: 1,152.00
02- 786
FLORIDA
DEPARTMENT
OF
MANAGEMENT
SERVICES
JEB BUSH
Governor
CYNTHIA A. HENDERSON
Secretary
MyRbdda.com
TM
State Purchasing
4050 Esplanade Way
Suite 350
Tallahassee, Florida
32399-0950
Telephone:
850-488-8440
Fax:
850-414-6122
Internet
www.MyFloride.com
Suite 315
CERTIFICATION OF CONTRACT
TITLE: AUTOMOBILES & LIGHT TRUCKS
CONTRACT NO.: 070-001-02-1
ITB NO.: #6-070-001-P
EFFECTIVE: December 7, 2001 through September 30, 2002.
SUPERSEDES: 070-001-99-1
CONTRACTOR(S):
ATLANTIC TRUCK CENTER INC. (A)
AUTOWAY CHEVROLET (A)
CHAMPION CHEVROLET, INC. (A)
DON REID FORD (A)
DUVAL FORD (A)
GARBER BUICK/PONTIAC/GMC INC (A)
GARBER CHEVROLET (A)
HEINTZELMANS TRUCK CENTER INC. (A)
HILL KELLY DODGE INC. (A)
JACK CARUSO'S REGENCY DODGE (A)
MAROONE CHEVROLET, LLC (A)
MAROONE DODGE, LLC (A)
MONARCH DODGE (A)
MS and S TOYOTA (A)
ORVILLE BECKFORD FORD MERCURY (A)
ANY QUESTIONS, SUGGESTIONS, OR CONTRACT SUPPLIER
PROBLEMS WHICH MAY ARISE SHALL BE BROUGHT TO THE
ATTENTION OF JIM DEN BLEYKER AT (850) 488-8367, SUNCOM 278-
8367, E-MAIL: denblej@dms.state.fl.us
A. AUTHORITY - Upon affirmative action taken by the State of Florida
Department of Management Services, a contract has been executed
between the State of Florida and the designated contractors.
B. EFFECT - This contract was entered into to provide economies in the
purchase of Automobiles and Light Trucks by all State of Florida agencies
and institutions. Therefore, in compliance with Section 287.042, Florida
Statutes, all purchases of these commodities shall be made under the terms,
prices, and conditions of this contract and with the suppliers specified.
02- 786
070-500-430 3/4 TON PICKUP TRUCK, CREW -CAB, 4X2
(5CC)
NOTE: This detailed specification is not complete unless it is used in conjunction with Specification Number
GSAT-1, GENERAL SPECIFICATIONS All Automobiles and Light Trucks.
INTENDED USE
USED FOR REGULARLY HAULING BULK MATERIAL, LIGHT TO MEDIUM DUTY TOWING AND
TRANSPORTATION OF UP TO SIX INDIVIDUALS ON THE HIGHWAY AND OFF THE HIGHWAY
ON UNIMPROVED ROADS.
STD. CARGO AREA:
STD. WORKING CARGO CAPACITY:
STD. TOWING CAPACITY:
OPT. CARGO AREA AND WORKING CARGO
CAPACITY, OPT. 8005:
OPT. 8004 CHASSIS -CAB:
77 inches x 64 inches x 50 inches
2300 lbs. **
4000 lbs.
97 inches x 64 inches x 50* inches & 2100 lbs.**
8800 lbs. GVWR***
PERFORMANCE OPTIONS CARGO LBS. TOWING LBS.
(SWB/LWB)
OPT. 1001, DIESEL ENGINE 1700/1500 OR 4000
OPT. 2004, TRAILER TOW PKG. 2300/2100 OR 7000
OPT. 2005, TRAILER TOW PKG. 2000/1800 OR 10,000
OPT. 2006, TRAILER TOW PKG. (DSL) 1700/1500 OR 10,000
* Distance between wheel housings
** Approx. net capacity, deducting weight of driver and five passengers
*** GVWR = Total maximum weight of a fully equipped, fully loaded truck
10. ENGINE: Gasoline engine, V8, minimum 5AL; standard alternator and battery; standard cooling
system.
20. TRANSMISSION: Minimum 4 speed' automatic.
30. AXLES: Standard axle ratio for specified engine/transmission combination.
40. PERFORMANCE ITEMS: Standard instrumentation; power steering.
50. COMFORT ITEMS: Air conditioning; all glass tinted; AM -FM radio.
60. SAFETY ITEMS: 4 -wheel anti-lock braking system; dual outside mirrors; daytime running lights; air
bags, driver and passenger.
70. TIRES & WHEELS: Five (5) Manufacturer's standard radial tires; matching spare tire, wheel and
frame mounted rack; jack and lug wrench.
268 02- 786
80. CHASSIS, FRAME, CAB: Minimum 8800 lbs. GVWR; 3200 lbs. (nominal) payload; minimum 153.0
inch wheelbase; fleetside body, maximum 83.0 inch inside box length; heavy-duty step -type rear
bumper, factory installed, bumper shall have a minimum capacity of 4000 lbs. horizontal pull weight
and 400 lbs. vertical tongue weight; six -passenger, four door, crew cab; all Manufacturer's standard
colors.
STATE: GVWR:8800 PAYLOAD: 2930
90. CONDITIONS: Contractor shall provide a Manufacturer's print-out (Chrysler "DIAL SYSTEM", Ford
"DORA", "GM AutoBook", or approved equivalent) to verify the Vehicle bid meets all the
requiremerts of this specification. Also, any dealer installed aftermarket components, if specified,
must be noted on the Manufacturer's print-out. All enclosed Conditions and Requirements shall apply.
269
�(� ry
V2- 1` SG
070-500-430
(5CC)
CONTRACTOR DISCOUNT*
MAKE: FORD F 250
MODEL PRICE
Western District
ORVILLE BECKFORD
0
W20
19,200.00 (A)
Northern District
DON REID FORD
0
F-250 CREW CAB
19,190.00 (B)
Central District
DON REID FORD
0
F-250 CREW CAB
18,990.00
Southern District
DON REID FORD
0
F-250 CREW CAB
19,190.00 (D)
NOTE: ONLY THE ABOVE NAMED CONTRACTOR(S) IS/ARE AUTHORIZED TO SELL THIS
COMMODITY UNDER THIS CONTRACT!
FACTORY CUT OFF DATE:
*Discount for Vehicle picked up by ordering Eligible User at Contractor's place of business.
Approximate delivery time required after receipt of order: (OB) 60-90 DAYS (DR) 90-180 DAYS
OPTION: 070-500-431 — Option, 3/4Ton Pickup Truck, Crew -Cab, 4x2, Spec. 5CC
OPTIONS: (OB) ORVILLE BECKFORD (DR) DON REID FORD
1001 Diesel engine, V8, minimum 6.6L.
2001 Manual overdrive transmission, 5 -speed.
2002 Manual overdrive transmission, 6 -speed.
2004 HD trailer towing equipment for towing up to 7000
lbs.
FORD: Includes these components: Trailer tow
package (531), Class IV hitch receiver, 10,000 lbs.
capacity, installed.
270
(OB)CODE: 99F
(DR)CODE: 99F
(OB)CODE: N/A
(DR)CODE: 446
(OB)CODE: 445
(DR)CODE: 446
(OB)CODE:
531/86R
(DR)CODE:
531/86R
PRICE: 4,420.00
PRICE: 4.412.00
PRICE: N/A
PRICE: 731.00
(Credit)
PRICE:70( 0.00)
(Credit)
PRICE: 731.00
(Credit)
PRICE: 360.00
PRICE: 305.00
02- 786
2005 HD trailer towing equipment for towing up to 10,000
lbs.
FORD: Includes these components: 6.8L V 10 engine (OB)CODE:
(99S), trailer tow package (531), Class IV hitch 99S/531/86R PRICE: 945.00
receiver, 10,000 lbs. capacity, installed. (DR)CODE:
99S/531/86R PRICE: 905.00
2006 HD trailer towing equipment for towing up to 10,000
lbs.
271
02- 786
FORD: Includes these components: 7.3L turbo diesel
(OB)CODE:
engine (99F), trailer tow package (531), Class IV
99F/86R/531
PRICE: 5,070.00
hitch receiver, 10,000 lbs. capacity, installed.
(DR)CODE:
99F/531/86R
PRICE: 4,717.00
3001
Limited slip or locking differential.
(OB)CODE: XC I
PRICE: 285.00
(DR)CODE: XC2
PRICE: 285.00
5002
Rain shields over door windows. Auto Ventshade Co.
(OB)CODE: DRS
PRICE: 65.00
or approved equivalent.
(DR)CODE: DIRS
PRICE: 125.00
5003
Speed control with resume feature.
(OB)CODE: 52N
PRICE: 385.00
(DR)CODE: 52N
PRICE: 385.00
5004
Cloth seating.
(OB)CODE: C
PRICE: 260.00
(DR)CODE: C
TRIM
PRICE: 160.00
5005
Power windows and door locks.
(OB)CODE: 903
PRICE: 600.00
(DR)CODE: 903
PRICE: 600.00
7001
Radial on/off road or all terrain tread on rear tires
(OB)CODE: T3N
PRICE: 125.00
only.
(DR)CODE: T3N
PRICE: 125.00
8001
Special state color. DOT Yellow (DuPont Centari
(OB)CODE: SP101
PRICE: N/C
L9069A, GM 9W3). Factory painted if available.
(DR)CODE: PTO
PRICE: N/C
SEE SPECIFICATION GSAT-1, NOTE 1.
8003
Special state colors, two-tone. Olympic White
(OB)CODE: SP101
PRICE: 365.00
(DuPont Centari K9031 A) above dripstrip on cab and
(DR)CODE: PTO
PRICE: 485.00
DOT Yellow (DuPont Centari L9069A, GM 9W3,
Dodge PYH) on remainder of cab. Factory painted if
available. SEE SPECIFICATION GSAT-1, NOTE 1.
271
02- 786
8004 Chassis -cab, single rear wheel model. 55.0 inch CA, (OB)CODE:
minimum. Minimum 8800 lbs. GVWR. A pickup 86D/512 PRICE: N/C
model with the box removed is acceptable provided (DR)CODE: 66D PRICE: 150.00
the Vehicle is eligible for pickup box removal and. Credit
conforms to all FMVSS, the NTEA, and the
Manufacturer's guidelines.
8005 Long bed model. Minimum 8800 lbs. GVWR, 3000 (OB)CODE: W172 PRICE: 300.00
lbs. (nominal) payload. Minimum 97.0 inch inside (DR)CODE: 172 PRICE: 200.00
box length.
GVWR: 8800 PAYLOAD: 2930
9901 Manufacturer's Extended Vehicle Warranty.
Warranty shall be for a period of 5 years or 75,000
miles whichever occurs first. SEE SPECIFICATION
EVW 5/75.
9902 Manufacturer's Extended Vehicle Warranty.
Warranty shall be for a period of 6 years or 100,000
miles whichever occurs first. SEE SPECIFICATION
EVW 6/100.
9903 Manufacturer's Extended Vehicle Warranty.
Warranty shall be for a period of 5 years or 75,000
miles whichever occurs first. Note to dealer: This
option applies to Ford only. SEE SPECIFICATION
EVW 5/75 (FBC).
(NOTE TO USER: FORD WARRANTY FOR
OPTION 8004)
9904 Manufacturer's Extended Vehicle Warranty.
Warranty shall be for a period of 6 years or 100,000
miles whichever occurs first. Note to dealer: This
option applies to Ford only. SEE SPECIFICATION
EVW 5/75 (FBC).
(NOTE TO USER: FORD WARRANTY FOR
OPTION 8004)
272
(OB)CODE: 5/75
DIESEL
(DR)CODE: ESP
DIESEL
(OB)CODE: 6/100
DIESEL
(DR)CODE: ESP
DIESEL
(OB)CODE: 5/75
DIESEL
(DR)CODE: ESP
DIESEL
(OB)CODE: 6/100
DIESEL
(DR)CODE: ESP
DIESEL
PRICE: 1,455.00
PRICE: 1,920.00
PRICE: 1,455.00
PRICE:1,810.00
PRICE: 2,270.00
PRICE: 2,520.00
PRICE: 2,270.00
PRICE: 2,625.00
PRICE: 2,050.00
PRICE: 2,225.00
PRICE: 2,050.00
PRICE: 2,775.00
PRICE: 2,550.00
PRICE: 3,225.00
PRICE: 2,555.00
PRICE: 3,280.00
o2 -r 786
9905 Fiberglass pickup bed cap. Cap must include a
locking rear door, deep tinted full length side
windows with a flipper or sliding section for
ventilation, and all other standard features. Bid for the
base Vehicle (short bed) only. Cap to be painted
same color as Vehicle. Cap Manufacturer to be
A.R.E. CH -Series, Leer 100LE or approved
equivalent.
(Base Vehicle) (OB)CODE: DFP PRICE: 1,490.00
(DR)CODE: FTDI PRICE: 1,250.00
(Opt 8005) (OB)CODE: DFP PRICE: 1,490.00
(DR)CODE: FTDI PRICE: 1,295.00
9906 Heavy-duty, single lid, crossover/saddle style
lockable toolbox. Box and lid shall be constructed of
minimum .063" diamond tread plate aluminum. To
include a full length Piano style lid hinge with two (2)
compressed gas lid springs/struts, two (2) non-
corrosive exterior latches (painted latches not
acceptable) that can be operated from either side of
the box, and all other standard features. Minimum
dimensions: 69" OAL x 18" D x 20" W. Adrian Steel
"Advantage", American Aluminum Accessories, Inc.
"1KS- **", Better Built "Crown Series", Weather
Guard "Saddle Box" or approved equivalent.
9907 Spray -on bed liner. Minimum thickness: 1/8" on front
and sides up to the bottom of the bed rail; 3/16" on
floor, wheel housings and tailgate. Bullhide, Line -X,
Rhino Tuff Stuff or approved equivalent.
(OB)CODE: DHD PRICE: 790.00
(DR)CODE: DITB PRICE: 385.00
(Base Vehicle) (OB)CODE: DSO PRICE: 675.00
(DR)CODE: DIBL PRICE: 475.00
(Opt 8005) (OB)CODE: DSO PRICE: 675.00
(DR)CODE: DIBL PRICE: 485.00
9908 Spray -on bed liner. Minimum thickness: 1/8" on front (OB)CODE: DSO PRICE: 675.00
bulkhead and sides; 3/16" on floor, tailgate and (DR)CODE: DIBL PRICE: 500.00
compartment tops. Bid for option 9909 only. Bullhide,
Line -X, Rhino Tuff Stuff or approved equivalent.
273
0fe _ 7S
9909 Service body, minimum 96" OAL, with a recessed (OB)CODE:
tread plate step bumper. Bid for option 8004 only. 54D/696J PRICE: 3,468.00
Knaphide Standard Model 600/700 "J" Series, (DR)CODE: DIUB PRICE: 2,995.00
Reading Standard Model "Classic Series", Stahl
"Challenger" Series or approved equivalent.
274
02- 786
070-544-140 COMPACT PICKUP TRUCK, 4X4
(38A)
NOTE: This detailed specification is not complete unless it is used in conjunction with Specification Number
GSAT-1, GENERAL SPECIFICATIONS All Automobiles and Light Trucks.
INTENDED USE
USED FOR HAULING BULK MATERIAL, LIGHT DUTY TOWING AND TRANSPORTATION OF UP
TO TWO INDIVIDUALS IN DENSE OR REMOTE AREAS.
STD. CARGO AREA:
STD. WORKING CARGO CAPACITY:
STD. TOWING CAPACITY:
71 inches x 52 inches x 40 inches
950 lbs. **
2000 lbs.
PERFORMANCE OPTIONS CARGO LBS. OR TOWING LBS.
OPT. 2004, TRAILER TOW PKG. 950 OR 3500
* Distance between wheel housings
** Approx. net capacity, deducting weight of driver and one passenger
10. ENGINE: Gasoline engine, V6, minimum 3.OL; standard alternator and battery; standard cooling
system.
20. TRANSMISSION: Minimum 4 speed automatic; minimum two -speed transfer case.
30. AXLES: Automatic locking front hubs or front axle disconnect system.
40. PERFORMANCE ITEMS: Standard instrumentation; power steering.
50. COMFORT ITEMS: Air conditioning; all glass tinted; AM -FM radio.
60. SAFETY ITEMS: 4 -wheel anti-lock braking system; dual outside mirrors; air bags, driver and
passenger.
70. TIRES & WHEELS: Four (4) Manufacturer's standard radial tires; standard spare tire and wheel; jack
and lug wrench.
80. CHASSIS, FRAME, CAB: Minimum 4700 lbs. GVWR; 1250 lbs. (nominal) payload; wheelbase,
111.0 inch minimum, 113.0 inch maximum; fleetside body, minimum 7 1. 0 inch inside box length;
step -type rear bumper, factory installed, bumper shall have a minimum capacity of 2000 lbs. horizontal
pull weight and 200 lbs. vertical tongue weight.
STATE: GVWR: 5340
PAYLOAD: 1275
90. CONDITIONS: Contractor shall provide a Manufacturer's print-out (Chrysler "DIAL SYSTEM", Ford
"DORA", "GM AutoBook", or approved equivalent) to verify the Vehicle bid meets all the
requirements of this specification. Also, any dealer installed aftermarket components, if specified,
must be noted on the Manufacturer's print-out. All enclosed Conditions and Requirements shall apply.
275 17,S6
02
070-544-140
(38A)
CONTRACTOR DISCOUNT*
MAKE: DODGE DAKOTA
MODEL PRICE
Western District
REGENCY DODGE
70.00
AN5E61
14,420.00 (A)
Northern District
REGENCY DODGE
15.00
AN5E61
14,385.00 (B)
Central District
REGENCY DODGE
25.00
AN5E61
14,405.00 (C)
Southern District
REGENCY DODGE
70.00
AN5E61
14,420.00 (D)
NOTE: ONLY THE ABOVE NAMED CONTRACTOR(S) IS/ARE AUTHORIZED TO SELL THIS
COMMODITY UNDER THIS CONTRACT!
FACTORY CUT OFF DATE:
*Discount for Vehicle picked up by ordering Eligible User at Contractor's place of business.
Approximate delivery time required after receipt of order: 90-120 DAYS
STATE USE ONLY
BASE VEHICLE: EPA MILEAGE: 16 LIFE CYCLE FUEL COST $5,000.00
OPTION: 070-544-141 - Option, Compact Pickup Truck, 4x4, Spec. 38A
OPTIONS:
2001 Manual overdrive transmission, 5 speed. CODE: 23W PRICE:81� 0.00)
(Credit)
2004 HD trailer towing equipment for towing up to 3500
lbs.
DODGE: Includes these components: HD cooling CODE: NMC/C2H PRICE: 295.00
(NMC), 5 -lead wiring harness, Class II hitch receiver,
3500 lbs. capacity, installed, with adapter, pin, clip
and 2 inch diameter ball.
3001 Limited slip or locking rear differential. CODE: DSA
5003 Speed control with resume feature. CODE: AJK
5008 Rain shields over door windows. Auto Ventshade Co. CODE: RV2
or approved equivalent.
276
PRICE: 263.00
PRICE: 363.00
PRICE: 45.00
02- 786
5009
Cloth seating.
CODE: G1 PRICE: 52.00
5010
Power windows and door locks.
CODE: 24C PRICE: 2,507.00
INCLUDES OPT 5003
6001
Daytime running lights.
CODE: N/A PRICE: N/A
7001
Four (4) radial all terrain or on/off road tread tires.
CODE: 24X PRICE: 652.00
Standard spare tire and wheel.
INCLUDES CARPET AND HIGH BACK
BUCKET SEATS
8004
Special state color. DOT Yellow (DuPont Centari
CODE: 8004 PRICE: 1,250.00
L9069A, GM 9W3, Dodge PYH). Factory painted if
available. SEE SPECIFICATION GSAT-1, NOTE 1.
DEALER PAINTED
8009
Roll bar. Must be manufactured by a recognized
CODE: 8009 PRICE: 255.00
Manufacturer of roll bars, be installed with minimum
7/16" SAE Grade 8 bolts, and must be secured in two
places on each side. State Manufacturer and model
no. bid.
MANUFACTURER: STERLING
MODEL NO.: R352PKCS
8012
Special state colors, two-tone. Olympic White
CODE: 8012 PRICE: 1,250.00
(DuPont Centari K9031 A) above dripstrip on body
and DOT Yellow (DuPont Centari L9069A, GM
9W3, Dodge PYH) on remainder of cab. Factory
painted if available. SEE SPECIFICATION GSAT-1,
NOTE 1.
DEALER PAINTED
8013
Skid plates or underbody shield package.
CODE: ADL PRICE: 119.00
9904
Manufacturer's Extended Vehicle Warranty.
CODE: M6100F PRICE: 1,725.00
Warranty shall be for a period of 6 years or 100,000
miles whichever occurs first. SEE SPECIFICATION
EVW 6/100.
277
02- 786
9907 Manufacturer's Extended Vehicle Warranty. CODE: M575F PRICE: 885.00
Warranty shall be for a period of 5 years or 75,000
miles whichever occurs first. SEE SPECIFICATION
EVW 5/75.
9908 Fiberglass pickup bed cap. Cap must include a CODE: LEER PRICE: 1,295.00
locking rear door, deep tinted full length side
windows with a flipper or sliding section for
ventilation, and all other standard features. Cap to be
painted same color as Vehicle. Cap Manufacturer to
be A.R.E. CH- Series, Leer 100LE or approved
equivalent.
9909 Heavy-duty, single lid, crossover/saddle style CODE: 9909 PRICE: 295.00
lockable toolbox. Box and lid shall be constructed of
minimum .063" diamond tread plate aluminum. To
include a full length Piano style lid hinge with two (2)
compressed gas lid springs/struts, two (2) non-
corrosive exterior latches (painted latches not
acceptable) that can be operated from either side of
the box, and all other standard features. Minimum
dimensions: 60" OAL x 13" D x 20" W. Adrian Steel
"Advantage", American Aluminum Accessories, Inc.
"IS-*", Better Built "Crown Series", Weather Guard
"Saddle Box" or approved equivalent.
9910 Spray -on bed liner. Minimum thickness: 1/8" on front CODE: 9910 PRICE: 575.00
and sides up to the bottom of the bed rail; 3/16" on
floor, wheel housings and tailgate. Bullhide, Line -X,
Rhino Tuff Stuff or approved equivalent.
278
02- 786
AWARD TINDER STATE OF FLORIDA
CONTRACT NOS. 070-700-02-1 az 070-002-02-1
ITEM:
DEPARTMENT:
TYPE OF PURCHASE:
Light, Medium and Heavy Trucks
Public Works, Operations Division
Term
REASON: The Department of Public Works, Operations
Division has a need to purchase five (5) 8 -yard
dump trucks, two (2) 12 -yard dump trucks and five
(5) crew -cab pick-up trucks for maintenance of the
public right-of-ways.
RECOMMENDATION: It is recommended that award be made to various
vendors, awarded under existing State of Florida
Contract Nos. 070-700-02-1, effective through May
31, 2003, and 070-001-02-1, effective through
September 30, 2002, on an as needed contract basis,
subject to any extensions thereto by the State of
Florida, for the purchase of (5) 8 -yard dump trucks,
two (2) 12 -yard dump trucks and five (5) crew -cab
pick-up trucks, for the Department of Public Works,
Operations Division, in an amount not to exceed
$520,752; allocating funds therefor from Account
Code No. 352216.319201.6.840.
C 5: ,.-, - 7 -- -
Direct of P ch n
Date
AwardStateContracts ®� r 786
8C